P
PrintablesEddi Maevski
Battery Crates for AA, AAA, C and 9V - large quantity
Very nice model to store batteries, I've remixed mainly to upsize the battery count in each crate.
- Pobrania
- 401
- Polubienia
- 38
- Ocena
- 5
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesEddi Maevski
Generator Oil Fill Spout Funnel Downpour
Small spout / funnel to fill generator with oil.
- Pobrania
- 272
- Polubienia
- 35
- Ocena
- 0
P
PrintablesEddi Maevski
Radiation Shield for Temp / Humidity Sensors, "Stevenson screen" Helical fins design
Helical fins based radiation screen for temperature / humidity sensors. Parts have tight tolerances and interfaces, calibrated printer is required. 4 parts are needed: Main screen part. (No supports) Wall bracket. (Tree supports) Sensor…
- Pobrania
- 109
- Polubienia
- 7
- Ocena
- 5
P
PrintablesEddi Maevski
Sunglasses Holder Organizer, wall mounted, cabinet mounted
Can be printed on the Prusa Mini diagonally, main part length = 240mm. Center hole spacing 220mm. (9.44") Print main pole + x2 mount spacers, mount using 3-4.5 mm dia. countersunk screws. (DIN7991 or similar)
- Pobrania
- 91
- Polubienia
- 12
- Ocena
- 5
P
PrintablesEddi Maevski
Hair Bands Organizer, holder
Part fits on the Prusa Mini diagonally, part size 200x55 mm. Hole spacing is 154 mm across, middle hole is 37 mm below - see picture.
- Pobrania
- 88
- Polubienia
- 22
- Ocena
- 5
P
PrintablesEddi Maevski
Ferrule Organizer, Orginizer box, 6 compartments
Ferrule Organizer, Orginizer box, 6 compartments. Diameter 112 mm, Height 67 mm. Assembly: Glue stop plate using few drops of CA. Use M5 screw + nut to secure the lid.
- Pobrania
- 87
- Polubienia
- 18
- Ocena
- 5
P
PrintablesEddi Maevski
Frsky Taranis X9D M9 Gimbal protectors
Frsky Taranis X9D M9 gimbal protectors There are few options here on Thingiverse...I've wanted better fit and wider opening to fit many custom stick ends (stick opening dia. 12.5 mm) Printed in PLA, infill 100%. M9 gimbals , highly…
- Pobrania
- 84
- Polubienia
- 9
- Ocena
- 5
P
PrintablesEddi Maevski
Dyson V7 - V15 accessories adapter to 34mm generic shop vac
I've designed this to use Dyson V11 Animal+ accessories with generic shop vac I have (which is powerful but came with almost no accessories) For dimensions refer to drawing. This adapter will fit all dyson accessories with the “clicky”…
- Pobrania
- 79
- Polubienia
- 5
- Ocena
- 0
P
PrintablesEddi Maevski
S800 Reptile Sky Shadow Control Horns
S800 Reptile Sky Shadow Control Horns Designed to fit the reptile S800 Sky Shadow, the original horns are a joke. Recommended print materials: Nylon carbon. PETG. ABS Print orientation Everything can be printed normally (as shown). Some…
- Pobrania
- 54
- Polubienia
- 2
- Ocena
- 0
P
PrintablesEddi Maevski
DPS5005 USB C Power Bench Power Supply
This project was on my backlog for a while…. It's cute little bench PSU with main goal being powering some electronics projects, dev. MCU boards and other low voltage stuff. I had x1 DPS5005 laying around, but wanted at least x2 channel,…
- Pobrania
- 51
- Polubienia
- 12
- Ocena
- 0
P
PrintablesEddi Maevski
Sinilink XY Clock Case
Simple two parts case for Sinilink XY Clock, flashed with Tasmota FW XY Clock Info from Tasmota database - link . Notes: All parts have correct print orientation. Minimal support required + I've used brim of 15 lines for both parts. USB C…
- Pobrania
- 47
- Polubienia
- 7
- Ocena
- 0
P
PrintablesEddi Maevski
Ender 3 Front case for BTT SKR v1.3 + RPI3
Ender 3 Front case for BTT SKR v1.3 + RPI3 for running Octopring / Klipper I've searched for cases to accommodate RPI3 ans SKR v1.3 on the front replacing the stock electronics case without luck...so I've designed my own. Hope it will be…
- Pobrania
- 41
- Polubienia
- 9
- Ocena
- 0
P
PrintablesEddi Maevski
C1 CHASER 1200MM, Control Horns
C1 Chaser 1200mm Control Horns Designed to fit the C1 Chaser flying wing, I use it with enlarged balsa elevons. Recommended print materials: PLA PETG ABS Print orientation STL is in correct orientation, no supports needed. Dimensions…
- Pobrania
- 39
- Polubienia
- 3
- Ocena
- 0
P
PrintablesEddi Maevski
Presence sensor ESP8266, LD2410C, BME280 and WS2812 Status Led
Presence sensor for use in Home Automation Parts used: ESP12E (ESP8266) with breakout board, 26x38mm HLK2410c 24G radar sensor, 22x16mm. BME280 Temp, pressure and humidity sensor, 15x12mm WS2812 LED, x4 pixels, 10x32mm. Notes: All parts…
- Pobrania
- 38
- Polubienia
- 7
- Ocena
- 0
P
PrintablesEddi Maevski
GoPro Hero 4, 2 Axis Gimbal for Reptile 500 MWC (Discovery Clone)
This is 2 axis gimbal for the Reptile 500 MWC (TBS Discovery Clone). ( http://www.aliexpress.com/item/REPTILE-MWC-X-Mode-Full-Carbon-Fiber-Alien-Multicopter-500mm-Quadcopter-Frame-Black/32459603563.html ) Designed explicitly for GoPro…
- Pobrania
- 36
- Polubienia
- 7
- Ocena
- 0
P
PrintablesEddi Maevski
Ritewing Mini Drak Motor Mount 2814 25x19 and 25x25
Ritewing Mini Drak Motor Mount 2814, 25 x 19 and 25 x 25 mount holes pattern. Designed to fit Ritewing Mini Drak. I had Cobra 2814 1800Kv spinning APC 7x5, basically the recommended combo, decided to switch to something more efficient for…
- Pobrania
- 31
- Polubienia
- 1
- Ocena
- 5
P
PrintablesEddi Maevski
Prusa Mini Hot End Pass Thru Adapter M8x1 to M10x0.9
Simple adapter to allow single bowden tube from extruder to heat break. It's hard to find M8x1.25 to PC4 quick connect fittings, some vendors on Ali sell them with mixed results. This adapters allows to reuse original Prusa fitting (see…
- Pobrania
- 30
- Polubienia
- 7
- Ocena
- 5
P
PrintablesEddi Maevski
Ritewing Mini Drak Vertical Stabilizers Skids
Ritewing Mini Drak Vertical Vertical Stabilizers Skids Designed to fit Ritewing Mini Drak. Provides protection and increased skidding performance.... Recommended print materials: PLA+. PETG. ABS. Print orientation File is oriented…
- Pobrania
- 27
- Polubienia
- 1
- Ocena
- 0
P
PrintablesEddi Maevski
Mini Talon Roll, Pan Gimbal Storm32 Canopy
Mini Talon Roll, Pan Brushless motors gimbal, Storm32 gimbal controller * DO NOT PRINT, x2 AXIS DON'T WORK AS EXPECTED THERE IS CROSSTALK BETWEEN THEM, CHECK VIDEO ATTACHED * Introduction and credits First big thanks and credit to Mark Q.…
- Pobrania
- 27
- Polubienia
- 1
- Ocena
- 0
P
PrintablesEddi Maevski
Ritewing Mini Drak Horns
Ritewing Mini Drak Control Horns Designed to fit as direct drop in for horns supplied in Mini Drak kit. Recommended print materials: Nylon carbon. PETG. ABS Print orientation Everything can be printed normally (as shown). Some specs: Top…
- Pobrania
- 25
- Polubienia
- 4
- Ocena
- 0
P
PrintablesEddi Maevski
Wings Wall Mount, S800, C1 Chaser and Mini Drak
Wings Wall Mount, S800, C1 Chaser and Mini Drak. Designed to put wings on the wall, each model mounts are specific per LE thickness and sweep angle. Recommended print materials: PLA+. PLA. Print orientation File need to be oriented flat…
- Pobrania
- 23
- Polubienia
- 0
- Ocena
- 0
P
PrintablesEddi Maevski
C1 Chaser 1200mm, FC 36x36 Mount, Holes 30.5x30.5
C1 Chaser 1200mm, FC 36x36 Mount Designed to fit the C1 Chaser flying wing, provides base for mounting 36x36 FC, holes are at 30.5x30.5. Recommended print materials: PLA PETG ABS Print orientation STL is in correct orientation, no…
- Pobrania
- 22
- Polubienia
- 0
- Ocena
- 0
P
PrintablesEddi Maevski
S800 Reptile Sky Shadow Skids, Skid, Protectors
S800 Reptile Sky Shadow Skids Designed to fit the reptile S800 Sky Shadow, provides means of protection for the bottom during those "rough" landings. Recommended print materials: Nylon carbon. PETG. ABS Instructions Glue into place using…
- Pobrania
- 22
- Polubienia
- 0
- Ocena
- 0
P
PrintablesEddi Maevski
Prusa Mini Display Box RaspberryPI Case 3B, 4B and soon 5
RPI Display Box Mini / Mini+ Case and interface parts for mounting your RaspberryPi 3B / 4B / 5 at the back of the Mini/Mini+ display box. Printing Notes: Layer height 0.15 mm. Designed for 0.45 line width. All supports are integrated…
- Pobrania
- 20
- Polubienia
- 4
- Ocena
- 0
P
PrintablesEddi Maevski
Wire mount clip
Wire clip Designed for various models, making wiring neat and tidy. Recommended print materials: PLA+. PETG. ABS. Print orientation File is oriented correctly, no support is needed. Vitamins Glue into place using flexible glue, best…
- Pobrania
- 19
- Polubienia
- 3
- Ocena
- 0
P
PrintablesEddi Maevski
RITEWING MINI DRAK BAY COVERS (HINGED IN PLACE)
Ritewing Mini Drak Bay Covers (hinged in place) Designed to fit Ritewing Mini Drak. Moved RX / VTX to wings and needed something to replace the poor cora covers. Recommended print materials: PLA+. PETG. ABS. Print notes Ensure first layer…
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
PrintablesEddi Maevski
Ritewing Mini Drak Servo Reducers
Ritewing Mini Drak servo pockets are direct fit for Corona DS-339MG servos, those are low quality and very sensitive to 1.3Ghz video, they will rattle and behave erratically when the VTX is near by. I use BlueBird BMS-390DMH (Coreless)…
- Pobrania
- 17
- Polubienia
- 0
- Ocena
- 0
P
PrintablesEddi Maevski
C1 Chaser 1200mm, ESC Mount
C1 Chaser 1200mm ESC mount Designed to fit the C1 Chaser flying wing, provides cooling to ESC (don't forget to remove heat shrink from ESC) Recommended print materials: PLA PETG ABS Print orientation STL is in correct orientation, no…
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
PrintablesEddi Maevski
Avis 5, Gopro Hero 7, central strap mount
Avis 5 Gopro Hero 7 mount 3 Versions: 30 deg LOW. 30 deg HIGH. (H in filename) 25 deg HIGH. (H in filename) H - Camera lowest corner is at 9 mm from top plate. L - Camera lowest corner is at 4 mm from top plate. Frame is available on…
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
PrintablesEddi Maevski
Ritewing Mini Drak RX Cover Hinged
Ritewing Mini Drak RX Bay cover, hinged. Designed to fit as direct drop in for stock coraplast bay covers. Introduction Fitting UHF dipole vertically with both elements above the craft. Two small naca ducts provide some cooling intake.…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.