Liczymy pasujące modele…
Warning: Do not use a printed tube to make a moderator. A moderator of any length, including an integrated one, can be assembled from a set of cones. The moderator is assembled on the basis of a 40x1.5 mm aluminum tube. Secure the covers…
The adapter is recommended to print vertically at low print speed, 100% full, with m3x14 screws for mounting. It is necessary to use a filament with a very good connection of the layers.
Quick-release protective caps for sights with diameters of 47 mm and 29 mm. I don't think this is a good idea, but I was asked to draw them. Maybe someone else will need them. Petg filament can be used to print the base, and TPU 95 can be…
Install the rings on the weaver bar. Install the sight on the rings without tightening the mounting screws. Install the pad on the weaver bar, move the cone to align the sight relative to the weaver bar. Tighten the sight mounting screws,…
Remember that you make all the changes to the moderator's work and are responsible for all the dangers. The moderator's inner chamber has a depth of 88mm. I used 4 cones of 10mm and 1 cone of 20mm with a sleeve length of 19 mm. The front…
I made this model in order to train the dexterity of my fingers. Once upon a time, I accidentally cut off my index finger on my right hand with an oblique one. He hasn't moved since. Gangsters use similar beads, playing them between their…
Any ABS PetG PLA material can be used. to print with supports, ideally the support cover is made of PVA or if the main material is PetG, then the support cover is printed from PLA. Set the gap to 0. If the supports are made of the main…
10/20/2025 added the 4th version of the VCC stock. The gun installation location has been changed, the installation has become more dense, and the angles have been fixed. Added an installation location for a fine-tuning device.
Handguard for Krugergun Korsar air rifle with a 350mm barrel with a diameter of 15 mm. The length of the forearm is 55 mm. Print from PetG ABS. Nozzle 0.4; layer 0.2; 4 perimeters; filling 25% For ease of modification, I add a step file.
We print boldly from PetG and don't worry, and that's happiness. 4 perimeters, 25 fillings, 0.4 mm nozzle, 0.2 mm layer. We print in an upright position, it is better to turn the handguard over and put it with the back side down. To…
We print boldly from PetG and don't worry, and that's happiness. 4 perimeters, 25 fillings, 0.4 mm nozzle, 0.2 mm layer. We print in an upright position, it is better to turn the handguard over and put it with the back side down. To…
The dimensions of the partition are 36.8 x 15 x 7mm. Specially made 6mm passageways for .177 cal; 7mm for .22 cal; 8mm for .25 cal. To simplify the alignment of the barrel bore The material of manufacture can be any ABS PLA PetG I…
I really like the handles of the Hi-Capa and Glock pistols. I decided to make myself a Hi-Cap grip. I took all the dimensions from the handle of the original model of the Hi-Capa airsoft pistol modification. The handle turned out to be…
Remember that you make all the changes to the moderator's work and are responsible for all the dangers. The product is designed not only for the Korsar pistol, but also for any pistol, the silencer of which is mounted on the m12x1 thread.…
Sound moderator. The mounting thread is m10x1mm. Exclusively for 4.5mm (.177) caliber Through holes of 6 mm You can use a 6.5-7mm drill bit and use it with a 5.5mm (.22) caliber. Warning Use the moderator only on CO2. Be extremely careful…
Remember that you make all the changes to the moderator's work and are responsible for all the dangers. Insert for the Korsar pistol moderator. Under 22 caliber. Printed with Petg filament. Even without filling in the original moderator,…
I apologize for making a mistake with the location of the chapels. But I really don't want to redo it. The valve is under .22 cal for the moderator per 40x1,5mm pipe. I recommend printing the flap from a TPU filament. The material for the…
Especially for those who did not have a 3.5mm bypass sleeve included. Printed from PLA; PetG; PA; PA-CF. All these materials have withstood the pressure of CO2. !Warning! Attention, I do not recommend using it in PCP.
The handle on the lid of the Tefal pan broke and I drew a new one. Perhaps someone has encountered such a problem and my work will be useful to them. The principle of reverse engineering was applied to the development, this pen differs…
First, I drew a clip with a regular impeller, I printed it from PetG, PetG CF, PA CF. And there was always the same result, the impeller was cut off by the drum rotation mechanism. I thought about how to strengthen this element and made…
Transition bar from dovetail to weaver. I was making this bar for myself and ran into a problem, I have 3 pistols and if the bar is placed on one of them, then it does not fit on the other. All 3 pistols have different dovetail sizes.…
Mock-up of the PPC-28 bullet (subcalibre target bullet). The layout is not divided into parts, as in the original, the shank and the bullet are connected into a single whole. The dimensions are taken from the original.
Print them out in different colors and keep them in a jar. You can shoot them without breaking the gun's seal. At 5 meters, they fly in a tight group. I've attached a SolidWorks file for editing the caliber. The default caliber is 5.5.
I couldn't find a factory solution, so I had to design my own. I know a lot of people are looking for these covers. I printed them from TPU 95 Creality. They solve the storage and dust protection issues 100%.
"Zero" transfer port insert for the Leshiy 2 rifle. It helps avoid unwanted police attention. You should determine the optimal hole size for the 3-joule limit yourself. It should be printed using a strong PA12 composite so it doesn't…
To wszystkie aktualnie dostępne wyniki.
