Liczymy pasujące modele…
This remix fits a larger microswitch like OMRON D3V-11-1C4 or similar from other brands. Compared to the original design, this uses a heat set brass inserts (M3) and a 14mm M3 screw to secure the switch in place, making it possible to…
This is a microphone flag to be used with regular handheld interview microphones. I have tested it with my Shure Beta 58A microphones, but it should easily fit many other vocal/interview mics. The OpenSCAD file is made so that it is easy…
This is a small, quick to print adapter, that extends the length of a half size Mini PCIe card, so that it can sit properly in a full size socket. It simple snaps in and is hold in place using small protrusions that fit on the mounting…
This is a 3D printed piece that works as an interconnect between Duplo bricks from Lego and Brio or IKEA LILLABO wooden train tracks. I was inspired by http://www.thingiverse.com/thing:4041 , but after trying out a print, I found it too…
This is a battery box designed as a module in OpenSCAD, that allows you to make a holder for 1 to as many as you like (or your OpenSCAD installation will want to compile) I needed a battery holder that could be screw mounted on a little…
These are little clips that help keep the lid from falling of the smaller SAMLA boxes from IKEA. This clips works with the 5L, the 11L and the 22L boxes and their lids. The clips have a little wedge sticking out that holds the clips…
Description and goals This is a slim case for the WHY2025 electronic event badge, that sits on the back exposing most of the sides, including the spacer, that then gets part of the overall look, especially if printed in a contrast color…
This case exposes the USB connector and in the other end has an output for a larger cable (fit's a diameter of 5.5mm nicely) and as part fo the case, there is a cable retainer, helps to keep the cable inside the case and not breaking the…
This is a simple, yet sleek business card holder, that can be configured to fit your cards perfectly. You can change the size and using OpenSCAD and also configure it to emboss a logo, to match your branding. When configured with the size…
Trays like these are commonly used for small prototype or productions runs with some manual steps, where there is a need to store the PCBs in between processes. It helps keep track of completed items and helps move them from one…
I received a broken box with Kimwipes, so this is a design for a replacement box, but can of course also be used if you simply prefer the clean look or the slightly heavier feel. It's designed with a bottom part and a lid with a cutout,…
This is a minimalistic zip tie anchor for smaller zip ties (up to about 3.5mm in width) designed to be used with double sided tape or pads for mounting on case sides, etc. while doing cable management or similar. The base is 20x20 mm.
This is a conversion of an HP DPS-800GB server power supply, into a benchtop supply with connectors more commonly used for electronics and electrical prototyping. It's designed to be relatively easy to make, and not least easier to…
This thing is a 3D printed shoulder rig for DSLR cameras to help stabilize when shooting video. I'm using the industry standard aluminum pipe size and spacing, so it should be possible to combine these printed parts with commercially…
This model is quick to print and snaps on the back rail, and lifts the frame just enough to have both of the wheels free from the surface (eg. table), so that it doesn't run away, when you accidentally turn on power or similar during…
Simple tray for small 100x100mm napkins like the MECHANIC HK4090 Soft Anti-static Cleanroom wipes. This uses the same design details as the Cleaning Station ( https://www.printables.com/model/1111018-cleaning-station ) and the PCB Trays (…
This ia a handle for a cheap carbide tipped scriber, making it much nicer to use, and due to it's triangular shape, less likely to roll off your work surface. This is made to work with a pretty cheap scriber that I got from AliExpress…
This attachment for the Festool OF 1010 EBQ-Plus router helps keep the router aligned, when deepening an existing track, eg. the one in the wooden deck on a sailboat, where rubber is normally applied. When refurbishing a deck, you might…
This model is made out of both a printed part and the raw filament, that has been bend around a 3D printed guide to give it the right shape. I printed these out with 0.2 mm layers and I think it was something like 80% infill. They aren't…
This is a replacement suction add-on that uses the mounting hardware for the original one, but it's essentially just a few screws that have some of the threads removed to fit into the motor holding bracket of the Heiz High-Z S-720/T (and…
Most people that have had an Apple Power Book for some years probably know that the power supply have a weak spot near the connector that plugs into the computer. The cable simply opens up and shows exposed wires which isn't so good. I…
This is a stamp and handle that I have made for the hackerspace Labitat ( http://labitat.dk ), so that we can stamp hackerspace passports ( https://www.noisebridge.net/wiki/Passport ) when we have visitors to the space. I have printed it…
This is a base or skeleton case, that protects the underside of the PCB, mostly from unintended shorts do to accidentally placing the board on top of conductive elements on your workbench. There is space inside for all the through hole…
This is a frame and cover for an iPhone MagSafe charger to be mounted on a camera rig or similar mating up with an ARRI rosette for angle adjustment. Possible use cases Shooting notes Remote monitoring Recording BTS or instructional…
To wszystkie aktualnie dostępne wyniki.
