Liczymy pasujące modele…
Simple 11 slot Usb cable hanger Print Settings Printer: scratch built Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.26 Infill: 20% Filament: prusament PLA Jet black Category: Office
A silly stool sample joke to take to your doctors
a simple blink camera 90 degree mount using the original screws 2 m3x12mm bolts and 2 m3 lock nuts are required to secure the original mount. It is easier to fix the 90 degree bracket to the wall first and then the original mount with the…
A simple clamp for 8mm smooth rods hardware needed per clamp: 1 x m3 x 8mm bolt 1 x m3 nut Print Settings Printer Brand: RepRap Printer: P3Steel Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.26 Infill: 80% or more Category:…
Manchester Worker Bee. The last picture is v3 after painting with acrylic paint. Category: Art
Diy flash drive case. The opening for the usb plug might need opening up a little depending on your printer. the lid is glued with some 5 min epoxy The board is a nice tight fit so be careful getting it in. infill 25% layer 0.20mm
I have gotten fed up with tripping up over shoes so i've designed this simple hanger to organize them. 29/11/16 I have added a hanger for flip flops/thong sandals Print Settings Printer: big printer Rafts: No Supports: No Resolution: 0.26…
ciclop 3d scanner calibration pattern in jpg and pdf format i have also included the BQ Ciclop Scanner Pattern Surface by Jivens Category: 3D Printing
sign-maker openscad scripts from BigCliveLive Saturday Night Clive - The Cast Iron Stream **Updated 22/06/22 Clive has released a video on the use of the scrips. I have included the new V3 scrips He posted
M3 Thumbscrew for cap head machine screws
p clip for 13mm od 13mm flexible conduit takes a m5 bolt
A simple Blink outdoor camera drilling template
simple stand/holder for a set of 6 esd tweezers Print Settings Printer Brand: Prusa Printer: Prusa Steel Rafts: No Supports: Yes Resolution: 0.26 Infill: 40% Category: DIY
dual 18650 box mod with voltage meter parts needed : 22 2mm dia x1mm n52 neodymium disk magnets 2 Keystone 209 battery connectors 2 Keystone 228 battery connectors 1 lcd voltage meter 1 short 16mm push button 1 22mm 510 connector 1…
Bsa meteor mk5 mainspring compression tool I use it with a Silverline 613111 sash clamp Must be printed at 100% infill in the upright position. 0.20mm layer height I use pla for it without any problems Please note that you can be…
Replacment sandisk ultra usb 3.0 flash drive housing Print Settings Printer Brand: RepRap Printer: p3steel Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.26 Infill: 100% Category: Replacement Parts
Print 'n' paint tux Print Settings Printer Brand: Prusa Printer: Prusa Steel Rafts: No Supports: No Resolution: 0.28 Infill: 10% Post-Printing painting I have found that acrylic paint works well on pla Category: 2D Art
big tree tech octopus v1.1 92mm fan mount
Air Arms TX200 cocking lever e clip removal and fitting tool infill 100% The clip needs to be rotated so the open side is up then put the tool over the clip and put your finger on the end to stop it slipping of then just pull. To refit…
Wear it with pride ! It can be scaled down to make earrings as well ! Category: Jewelry
drill press depth stop. It uses all the original hardware. you have to remove the chuck for fitting. Infill >20%
A basic case for the jtagulator Hardware: 3x m3x8 bolts 3x m3 washers 3x m3 heat inserts (3mm long ones)
Shelf brackets to reuse 200x200x4.5mm glass bed plates
Fat Fixer 15mm diameter button hole extender. Adds a little to the waist band of your trousers. Can be warmed with a hair dryer to add a slight curve to fit the body shape. Print settings: >30% infill support's required 0.2mm layer Hight
simple jig to get straight cuts on 2.54mm pitch pin headers Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: printed with a 0.4 nozzle Infill: 100% Category: Electronics
simple stand for a Seagate 1TB backup plus slim hdd. Category: Computer
foamy whoofler that big Clive uses on his live streams it is in openscad https://www.youtube.com/channel/UClIzWmVzGPm2zhNT2XZ-Rkw //MR WHOOFLER FIRE FOAM MAKER //DO NOT EVER MAKE ONE OF THESE $fn=100; difference(){ union(){ difference(){…
Christmas tree stencil You can scale it up in your slicer to what ever size you need. Print Settings Printer Brand: Prusa Printer: Prusa Steel Rafts: No Supports: No Resolution: 0.28 Infill: 20% Category: 2D Art
Small animal drinking bottle holder for the 600ml - Large bottle http://www.caldex.com/feed\_bottles-crystal-de-luxe.php only 2 m3 nuts and 2 m3 bolts are needed to attach it to the cage Print Settings Printer Brand: RepRap Printer:…
Press together Vape coil wire spool. the wire retaining holes may need to be opened up depending on you printers accuracy. prints well at 15% infill
simple bolt on spool holder for the p3steel. Print Settings Printer Brand: RepRap Printer: P3Steel Rafts: Doesn't Matter Supports: Doesn't Matter Infill: 50% Category: 3D Printing
simple glass bed clip that lets you use the full size of the bed. The clip is for 214x214 heated bed with 200x200 glass sheet Category: 3D Printer Accessories
MR16 12v led inspection lamp. Hardware needed: 1x MR16 led 12v bulb 6x m3 x 25mm bolts 6x m3 nuts 1x pcb terminal block 1x 18mm x 13mm switch and a suitible lengh and thickness of cable Print Settings Rafts: Doesn't Matter Supports:…
***Update 22/12/17 Ive added the bill of materials gerber files for the re-arm for ramps pcb i had problems finding a fab house the uses Diptrace files so i have converted them to gerber files Here is the link to the original files:…
My version of misans brilliant design. It can use a full A3 size all the rod ends are clamped and I have added x and y minimum endstops and strengthened the pen holder and added a return spring to the pen carriage.I have updated grbl to…
long and short version prusa i3/p3steel x axis endstop holder Print Settings Printer: big printer Rafts: No Supports: No Resolution: 0.26 Infill: 40% Category: 3D Printer Parts
my rework of the ciclop scanner shaft coupling that now fits a m3 nut without slipping and ive added a flat to provent the coupling slippng on the shaft. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Infill: 100% Category:…
I broke the original mount on my logitech c170 and needed a simple replacement. you can easily remove the original mount by running a hacksaw between the gap at the camera end at the end with the blanking plate. I have used a round magnet…
Print 4 and attach to a length of 10mm wide elastic. Then just clip one end to the waistband of your leggings and the other end to your sports bra and never have to bother about pulling up your leggings every five minutes ! Parts : length…
Prusa i3 Rework Extruder sensor bracket for 12mm inductive/ capacitive sensor Print Settings Printer: big printer Rafts: No Supports: Yes Resolution: 0.26 Infill: 60% Category: 3D Printer Parts
RGB clock auto dimming light blocker for the faux nixie rgb clocks. The clocks are badly designed and the light from the side of digits shines on the ldr preventing it from auto dimming. This part just slips over the standoffs. Infill 40%…
A Simple soap Dish with SLIPPERY WHEN WET. It prints with very low infill
Just a simple tray for bits and bobs. Category: 3D Printer Accessories
simple vesa mount for the odroid u3 fits 75mm & 100mm hole spacing Print Settings Printer Brand: Prusa Printer: Prusa Steel Rafts: No Supports: No Resolution: 0.26 Infill: 30% Category: Computer
Replacement end to hold a cheap encoder module with the standard acrylic DSO138 case Print Settings Printer: Huge corexy Rafts: No Supports: Yes Resolution: 0.2mm Infill: >20%
Geiger tube sbm-20 Clip with 2xm2 mounting holes print at 100% infill
simple filament guide for the p3steel Print Settings Printer Brand: RepRap Printer: P3Steel Rafts: Doesn't Matter Supports: Doesn't Matter Infill: 30% Category: 3D Printer Parts
A joke “emergency fiver” holder Print with outside to the bed. Although its designed for a uk £5 note it will fit any note 130x70mm If you want to be really evil you could use m3 security bolts or some red Loctite
Simple google aiy skeleton case Parts need: raspberry pi 2/3 google aiy voice kit 10x10mm m3 bolts 4xm3 nuts 3x15mm m3 threaded rod 8x6mm standered pcb standoffs and screws 6x60mm m3 standoffs Print Settings Printer Brand: Prusa Printer:…
Prusa i3 Rework Extruder sensor bracket for 12mm inductive/ capacitive sensor. Print Settings Printer: big printer Rafts: No Supports: No Resolution: 0.30 Infill: 60% Category: 3D Printer Parts
LM12UU x carriage for a E3D v6 hotend and a 18mm dia inductive/capacitive proximity sensor I HAVE NOT YET TESTED THIS DESIGN Category: 3D Printer Parts
2020 profile mount for KIS3R33S Module housing. You have to drill out the original enclosure base holes to allow the m3 bolts to pass through. nuts and bolts: 2x m5 button head 2x m3x15 cap head 2x m3 nuts Print Settings Printer Brand:…
Just added 6mm to the hight of the belt tensioner to make it a bit more sturdy Print Settings Printer Brand: RepRap Printer: P3Steel Rafts: Doesn't Matter Supports: Doesn't Matter Infill: 70% Category: 3D Printer Parts
Simple brackets to reuse that old 200x200 3mm thick mirror print bed. hardware: 2x 220mm 8mm threaded rod 8x 8mm nuts or 4x nuts and 4x dome nuts. I used all stainless steel so it can be used in the bathroom. Category: Household
I have made it to be height adjustable for using a e3d v6 lite. Print Settings Printer: big printer Rafts: No Supports: Yes Resolution: 0.26 Infill: 60% Category: 3D Printer Parts
This is my first design its just a simple remix of http://www.thingiverse.com/thing:602513 Category: 3D Printer Accessories
I quickly made this key fob to appose the Uk government's abhorrent exclusion of trans people from there so called conversion therapy ban it is incomplete and once again not fit for purpose. If you are in the Uk you can email your MP with…
Customized version of http://www.thingiverse.com/thing:166045 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=166045 Instructions Using the following options: bracket_length = 12 fan_hole_spacing = 40…
simple part to stop the nexus 7 battery from moving and unplugging itself Print Settings Printer Brand: RepRap Printer: p3steel Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.26 Infill: 30% Category: Tablet
p3steel switch mount for a 13x19mm rocker switch Print Settings Printer Brand: RepRap Printer: P3Steel Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.26 Infill: 30% Category: 3D Printer Parts
On my p3steel I found that after a while the front and rear had started to bend due to the belt tension and the belt would move this part has worked a 100% and now there is no more bending and the printer is a little less noisy it must be…
For mounting 9mm I/D 13.25 O/D flexible conduit and a 40mm fan on the back of an extruder. You need to rotate the gland 180 degrees in slic3r. Category: 3D Printer Extruders
Simple p3steel/prusa i3 anti wobble nut holder. It is designed to fit a M5 connector nut. From my quick tests it seams to work very well. Print Settings Printer Brand: Prusa Printer: Prusa Steel Rafts: No Supports: No Resolution: 0.28…
Prusa i3 Rework Extruder side fan mounting Print Settings Printer: big printer Rafts: No Supports: No Resolution: 0.26 Infill: 60% Category: 3D Printers
To wszystkie aktualnie dostępne wyniki.
