Liczymy pasujące modele…
This clamp prevents the housing from falling off during printing; the four small magnets are not strong enough to prevent that from happening. Printed Parts: ExtruderClamp.stl (1x) or ExtruderClamp_enclosure.stl (1x) The shortened version…
Proxxon MF70 CNC kit The Proxxon MF70 milling aluminum: https://www.youtube.com/watch?v=0W1iQ1PUNVY Following improvements/changes have been made compared to the design of ttsalo: full x-axis table range is now available. Using the ttsalo…
Parametric Chuck Key Holder for Lathe For my lathe (Vevor YS-2260A) the dimensions of the backsplash are: wBackPlate = 13.8; // mm hBackPlate = 9.8; // mm If the backsplash of your lathe has different dimensions, change values in…
Parametric Multifix type A Toolholders: Standard tool holder: MultifixA_Holder.stl V groove tool holder: MultifixA_VHolder.stl Dial Indicator holder: MultifixA_DialIndicatorHolder.stl Concentricity Pusher Holder:…
Parametric Hieroglyphic Alphabet. With the openscad program "Hieroglyphics.scad" it is possible: to draw parametric hieroglyphic texts by use of the function "drawText()" to draw a hieroglyphic text inside a cartouche by use of the…
Vevor Mini Lathe DRO mounting kit (YS-2260A). The "Apron.STL" that I used for modelling the parts is from https://www.thingiverse.com/tonycstech On a small lathe it is very hard to find an acceptable mounting spot for the x-axis scale. I…
Parametric Angle Gauge Blocks Recommendations: PLA (30% infill) Category: Machine Tools
Parametric Dial Indicator Holder for Vevor Lathe (YS-2260A) Required printed parts: DialIndicatorHolderBottom_square_nuts.stl (1x) or DialIndicatorHolderBottom_hex_nuts.stl (1x) DialIndicatorHolderTop_square_nuts.stl (1x) or…
Parametric Ball Turning Tool for Lathe I have been able to machine (mostly half) spheres in both aluminum and steel with this tool Required printed (or machined) parts: BallTurningTool_ToolBase.stl (1x)…
Parametric Toolrest for Parkside Grinding Machine (240W) STLs for two angles have been provided, but since the model is parametric, STLs for any angle can be generated 0 degrees (horizontal) 10 degrees (for grinding the lathe tool bits)…
OpenRC 4-Wheel Drive Go-Kart with Ackermann Steering The model is inspired by Lego Go-Kart 1972: https://www.toysperiod.com/lego-set-reference/technic/model/race/lego-1972-go-cart/ The custom electronics has been designed around the Esp32…
Sovol SV08 Fully enclosed Raiser. This is a remix of the open style Raiser of Gergo: https://drive.google.com/drive/folders/1fJzGwCswiRXadmaaq2O9OR1fVISvKaK1 @Gergo: if this remix infringes a copyright of yours, please let me now and I…
Parametric Morse Taper Adapter Sleeve MT3 to MT2: MTA_AdapterSleeve_3_2.stl MT4 to MT2: MTA_AdapterSleeve_4_2.stl MT4 to MT3: MTA_AdapterSleeve_4_3.stl MT5 to MT2: MTA_AdapterSleeve_5_2.stl MT5 to MT3: MTA_AdapterSleeve_5_3.stl MT5 to…
Parametric Tray for Toolwall Since the model is parametric, any tray size can be generated. The tray sizes provided do fit my tool wall (distance between major holes 45 mm and minor holes 15 mm) The model allows also to use knobs instead…
Parametric Tailstock Die Holder (38mm Die) Following Tailstock Die Holder types have been created: 3D printed Tailstock Die Holder with knurls: TailStockDieHolder2_knurled_38.stl Machined Tailstock Die Holder with knurls:…
Parametric Tailstock Die Holder. Required printed parts: TailStockDieHolder_knurl_nuts.stl (1x) or TailStockDieHolder_hex_nuts.stl (1x) or TailStockDieHolder_square_nuts.stl (1x) MTA_shank_2_12_30.stl or MTA_shank_2_12_40.stl (1x)…
Cafe Racer. Building instructions: https://www.toysperiod.com/lego-set-reference/technic/model/riding-cycle/lego-8810-alpha-racer/ As Headlight can be used: TileRound_2x2.stl or PlateRoundWithAxleHole_2x2.stl + Dish.stl As Tire can be…
Parametric Lathe Tailstock DRO holder. Required 3D Printed Parts: TailStockDRO_bracket_knurlnuts.stl (ABS, 80% infill) Optional 3D Printed Parts: AutoReleaseTailStock_extender2.stl Required other Parts: hex screw M3x8mm (1x) hex screw…
Parametric Cross Drilling Fixture Most interesting parameters to change: wxBlock = 40.0; // width of block wyBlock = 50.0; // length of block hBlock = 15.0; // height of block screwSize = SZ_M4; // size of the screw Remarks: recommended…
Sovol SV08 Parametric magnetically attached Enclosure The main design goals were following: the panels must be quickly removable (for printing PLA and for doing maintenance on the printer) the printer itself remains unmodified (no…
DRO Mounting kit for Paulimot Sieg SX2.7L Mill Scales used: X-Axis: travel length 550mm Y-Axis: travel length 200mm Z-Axis: travel length 300mm X-Axis Mount: DRO_bracketX_Left.stl (1x) DRO_bracketX_Right.stl (1x) DRO_bracketX_Plate.stl…
OpenRC Parametric Chinook. Software: https://github.com/projunk/ChinookESP32 This is a parametric version of Tom Stanton's Chinook design. I have tried to make the Chinook fly using a naze32 flight controller with both cleanflight and…
Parametric Sovol SV08 Spoolholder These spoolholders try to fix the two problems I have with the standard spoolholder: the too easy unwinding of the spool due to the bearings (the Ninjaflex washers allow for adjusting the friction) the…
Parametric BB-9E Ball Droid ==>Be aware: This is a work in progress! This design is heavily inspired by James Brutons BB-9E Ball Droid. I do like the ball design he used for this version of the ball droid, but I could not find any designs…
Parametric Tailstock Die Holder 2 Following Tailstock Die Holder types have been created: 3D printed Tailstock Die Holder: TailStockDieHolder2.stl 3D printed Tailstock Die Holder with knurls: TailStockDieHolder2_knurled.stl Machined…
Parametric Tap Follower Required Parts: TapFollower_metric_point.stl (1x) TapFollower_metric_hollowpoint.stl (1x) TapFollower_metric_tube_metal.stl (1x) Spring (1x) hex screw M3x6mm (1x) Remarks: I made the tap follower on the lathe. I…
Parametric Statically Balanced Flycutter This thing has been inspired by Blondihacks Statically Balanced Flycutter project. Similar to her project, this Flycutter has been statically balanced, however using OpenSCAD and the free version…
Classical Bird Feed House Required Printed Parts: Back.stl (1x) Floor.stl (1x) Front.stl (1x) MainPillar.stl (1x) RoofLeft.stl (1x) RoofRight.stl (1x) Side.stl (2x) SidePillarLeft.stl (1x) SidePillarRight.stl (1x) Optional Printed Parts:…
Parametric Toolrest for Ferm Grinding Machine (250W) STLs for two angles have been provided, but since the model is parametric, STLs for any angle can be generated 0 degrees (horizontal) 10 degrees (for grinding the lathe tool bits)…
Parametric Slitting Saw Arbor. This thing has been inspired by Blondihacks Slitting Saw Arbor project. STL files have been generated for 2 hole sizes. Since the design is parametric, with little effort STLs for any other hole size can be…
Parametric Parting Off Tool for lathe using spring. !!! be aware:!!! I have made so far the tool for bladeType=bt_HBM_1_5x8_25x73 from metal with wPartingTool = 11.6 I have made so far the tool for bladeType=bt_HBM_3_32x1_2x4 from metal…
Parametric Letter/Number Punch Guide and Storage Box. The Letter Punch guide is inspired by Blondihacks. I do not think it is required to make this guide out of metal; a 3D print should work just fine. The letter size of the punches is…
Parametric Trigger Lock for portable bandsaw Parkside PMBA20 20 V. !!!This Trigger Lock is meant to be used only in combination with a bandsaw table. It can be dangerous to use it without a table!!! Required 3D printed parts:…
Vevor Lathe Gearbox Spacer Fix. The idea of adding spacers to make the gearbox safe to use is from https://www.thingiverse.com/reynol32 It is NOT required to disassemble the gearbox to install the spacers. However I strongly recommend to…
Filament Runout Sensor 3mm. Required 3D printed parts: FilamentRunoutSensor_Case.stl (1x) FilamentRunoutSensor_Lid.stl (1x) Required other parts: switch (1x) screw M3x12 (4x) nut M3 (2x) knurlnut M3 (2x) JST socket 2 pins 2.54mm (1x) PTFE…
Shoulder Joint for SpotMicroESP32. This Shoulder Joint fixes the weak point in the shoulder servo connection of the original design. It also provides a servo cable hole to guide the servo cables from leg into the body. Required Parts (for…
Parametric Short Tap Follower. Required Parts: TapFollowerShort_point.stl (1x) or TapFollowerShort_hollowpoint.stl (1x) TapFollowerShort_tube_metal.stl (1x) Spring (1x) grub screw M3x6mm (1x) Category: Machine Tools
Parametric Lathe Faceplate Adapter 72mm-125mm. This adapter is meant to mount a Faceplate of size 72mm to a lathe with size 125 mm. As very temporary solution the PETG version can be used (95% infill recommended):…
Parametric Chipshield for Mill. This shield can be attached to the milling vise with aid of knurled screws. This design fits a 100 mm vise, but can be adjusted to any other size by changing the relevant parameters in the openscad file.…
Parametric Snail Fence 2 (diameter 120 mm). This snail fence tries to protect the plant by having multi layers of defense: a cylindrical tube covered with a copper mesh a reverse top cap a spiked ring Required 3D printed parts:…
Parametric EMount Adapter for HAYEAR HY-500M Digital Eyepiece. The Celestron nexstar 4SE telescope has two options to mount a digital camera/eyepiece to it: using the eyepiece using the Threaded Photographic Adapter The mirror can be…
To wszystkie aktualnie dostępne wyniki.
