Liczymy pasujące modele…
The original had a rough poly scale in some places like the robe, I didn't like the low poly look, so I reworked it in Blender. Remeshed, smoothed some parts manually, subsurface modifiers, resulting in resolution improvements. There is…
The SeedSigner PiP-Pill is a compact case with a print-in-place hinge and a very comfortable user experience. This compact enclosure makes use of the smaller “ zerocam ”, making it small enough to fit in any pocket. The trackball,…
A tamper evident, one-time use lock. Once locked, it has to be destroyed, which is evidently visible. I remixed this model so the overhangs print better and tweaked some tolerances.
Thank you to everyone who made this possible <3 Here it is, the Rugged Pill SeedSigner case. Single extruder and MMU Versions included. Print the Thumbstick and Buttons from TPU (98A) for the best handling experience. For the MMU version,…
This is a very compact but sturdy case for the DJI Mini 3 Drone. I created this, so it does use up minimal space in my backpack while still providing sufficient protection to the drone. The lid snaps safely on the enclosure, there are…
Remixed to have a separate lid which requires no tape and instead snap locks on the main case. This goes well with my DJI Mini 3 Travel case, which can be found here
A minimalistic NerdMiner/LilyGo T-Display S3 case. Print face down without supports. Insert the Display at an angle on the USB-C side, then lightly press down the other end to snap it into place. Don't press on the Display, it's fragile.…
Stackable Print-in-place planetary gears with two different sized links. Stack and connect the sun and planet gears to each other in any way you like. Depending on your printer's tolerances, the gears might run loose or tight. As a guide,…
This is a highly detailed and accurate model of the Bitaxe 601 Gamma manufactured by Opensourceminer. The stl can be used as a dummy, but there's also a .step file included with a fully populated pcb, heatsink, Noctua fan and even screws.…
A purely mechanical advent calendar in the shape of a christmas tree, ready for multicolor printing. Print all parts as oriented, no supports needed. 24 Drawers 4 Platforms 1 Stem 1 Tree Top 1 Star Topper Stack them, fill the 24 little…
Might need supports, depending on your printer's capability.
A stand which fits most, if not all the different versions of the bitaxe which are floating around. It shouldn't matter if they come with a usb-c or micro-usb port, the slot is dimensioned so they are accessible for flashing.…
Update: Added v12 with improved buttons for easier button presses. A print-in-place hinged case for the NerdMiner aka T-Display S3 that resembles an old-timey alarm clock. Insert the Display with the USB-C side first and slide it in place…
A small adapter which enables you to mount the spool holder to the Neptune 4 Max horizontally. 2pcs M3x30mm 2pcs M3 hex nuts 2pcs M3x35mm Be careful, your x-axis will collide with the spool if you use the full printer height!
A Christmas Tree which quickly prints in vase mode! Works best with silk green filament and 0.5mm line width. Enjoy Hey, you, don't forget to post a make!
Another quick test print to test retraction and get a calibration cube in 12 minutes on a Prusa. Measured from the base of the model, the cube is 10x10x10 mm with 1 mm thick walls.
The 3D printed Lobster that actually does... nothing. Nothing but look cool, that is. Doesn't need tokens Can't delete your emails Can't leak your auth credentials Also can't manage your life Looks cool Needs minimal supports
The Bitaxe Infinity Stand, which we created for SoloSatoshi is a nice, stable and open stand fitting any Bitaxe version. A slotting system enables you to slot the bases of the stand together to arrange multiple Bitaxes next to each other.…
Prints without supports, snap fit.
This is a remix of hellorocios Animal Crossing House. The door hinge didn't work very well for me and a few others because it was too flimsy, I simply made the hinge a little stronger. Now it also works when scaled down to 50%. All design…
Yes officer, it's a gaming console, obviously. The gaming Pill is a derivative of the Rugged Pill and intended for use with the Zerocam. Print with 0.2 mm layer height and 2 perimeters for best results. There is no sd-card slot, so insert…
A simple and quick test print to tune retraction settings on your 3D-printer. Prints in 10 minutes on a Prusa. Inspired by older retraction test models, the base is only two layers high, and the cylinder in the center forces diagonal…
A bitaxe backplate for mounting any bitaxe to a DIN-Rail. Requires 4 M3 screws which will thread right into the plastic. Print as oriented, no supports required.
A minimalist stand for the NerdAxe by Bitmaker. Print as oriented, no supports needed. Need a stand but don't have a 3D-printer? Get it printed professionally here.
A knurled, screwable Stackbox for a Blockmit style seed phrase backup for M8 stainless steel washers with 24 mm outer diameter). The box can hold up to 25 washers. Print with 0.15 mm layer height or lower, and at least 4 perimeters for a…
A stand which fits most, if not all the different versions of the bitaxe which are floating around. It shouldn't matter if they come with a usb-c or micro-usb port, the slot is dimensioned so they are accessible for flashing.…
A "wallet-style" Seed-Locker for a BlockMit Style Seed Word Backup. This is a very inconspicuous way to store a Seed, as it blends well between books and DVDs, yet it's tamper-evidently lockable. Print the files as they are oriented. The…
This is my version of a mushroom shaped button for fat-fingered people like me, who welcome a bigger thumbstick to navigate around their SeedSigner a little easier. It's a 2 part design that clicks together, works with the Orange Pill…
Simple yet elegant modular wall mounted Honeycomb Shelves. Print and mount them in the colors and configuration you prefer and extend them to your liking. All files are available in two versions . The original sized set maxes out the…
A simple stand for the NerdQaxe+ Print as oriented, no supports needed. Requires 4pcs M3 screws.
Clipper Sleeve Collection A collection of slip-on sleeves for standard Clipper lighters. Give your Clipper a unique look and improved grip while keeping the original functionality intact. Each design features a different surface pattern,…
Designed this jig to easily install solderless GPIO hammer headers on the Raspberry Pi Zero without the risk of bending or otherwise damaging the Pi or the GPIO Header. Place Pi on the jig like in the pictures, place the header and give…
A case for a Raspberry Pi 4 driven SeedSigner with room for the Waveshare LCD hat and no visible ribbon cable. The camera is housed in the bottom part. Only the top part requires support . Gcode for Prusa MK3S which worked well for me…
A simple adapter to mount an IceTower cooler to a bitaxe. Print as oriented 12 walls minimum Feel free to use this adapter commercially, as long as you don't sell the files.
A case for a Raspberry Pi 3 driven SeedSigner with room for the Waveshare LCD hat and no visible ribbon cable. The camera is housed in the bottom part. Only the top part requires support . The coverplate and thumbstick are stolen from…
Print as oriented, no supports needed as long as you have sufficient cooling. Brim recommended.
A quick printing mount for the Buddy3D Camera. Required hardware: - 6pcs 6x2mm magnets - 2pcs m 2.5 screws & nuts
A self-watering windowsill planter with a hex pattern for cacti or other small houseplants.
A two part Adapter for mounting a 40mm copper cooler to a Bitaxe. Requires 8pcs M3 computer screws of variable lenght. You might have to use the included shim to ensure good contact with the ASIC, as those copper coolers aren't all equal…
A stand and adapter for running the NerdQaxe++ with a 240mm watercooling AIO. Designed around the Corsair iCUE Titan / Corsair iCue Elite AIOs with 240mm radiators, but this stand works with many other models as well, as long as the…
It looks great when it works, but it often doesn't. Print and use at your own risk! The concept of this enclosure was to guide the air, which worked fairly well, but the back still needed to be opened up for the Bitaxe Gamma to not get…
This is an experimental threaded Joystick for the nub of the waveshare display hat used in the SeedSigner. How to print: Print with the thread facing down, about 3 mm above the build plate with light supports. Use the finest layer height…
So, why yet another phone stand? Well, for one, this one uses noticeably less material than others of similar format, and thus prints faster. It allows for two different mounting angles and has a hole for charging your phone on the stand.…
I use a different heatblock with my Sidewinder, the one compatible with the PT100 Thermistor. For this reason, most fan ducts were either too bulky for my setup or cooling the nozzle and heatblock more than the part. A few weeks and 12…
A heavy-duty spoolholder for the Sovol SV08 which needs no additional hardware, just pop it onto the inside of the original spoolholder with one bearing attached as seen in the picture. Interlock the parts using the original Screw and…
A wall mounted spoolholder for 1-3kg Spools I use this to mount 3kg spools behind my Bambu Lab CoreXY printers since their spoolholders are too small to hold bigger spools. Printed from PETG, similar or stronger material recommended.…
This is a remix of Motogeepie's wonderful fan duct, I only combined the two parts to one. Thingiverse servers have reached the end of thingiverse and won't let me tag the original thing, so here's the link:…
A fairly brutal adhesion and overhang test designed for the new super tack build plates.
Print upright without supports.
This is a wall mounted version of my "Osaka" case for the RockPro64 / RoninDojo Bokuto node. It's oriented a bit differently from the original case and has been modified to need zero support. Gcode for the lid, with all the modifications…
A Toolhead Cover for the Sovol SV08 with better airflow for the heatsink, and hexagons.A Toolhead Cover for the Sovol SV08 with better airflow for the heatsink, and hexagons. It's also a big more rigid than the remixed model. Requires…
Clipper OneCig Sometimes you don't need an entire pack. OneCig was designed for those moments when you only want to carry one single cigarette without crushing it in your pocket or having to bring a full pack along. The integrated tube…
A simple case with buttons for the Waveshare ESP32-P4-WIFI6 4.3inch Development Board
A small SeedSigner Stand with room to store 3 micro-sd cards and a screw on lid. Print as oriented, no supports needed.
Print your own Node case. I'm open sourcing this one, it's the V1 as I've moved on to selling the V2. Use Gcode at your own risk.
Introducing the R0ckstardev Action Figure – A Bitcoin Meme Brought to Life! A 21cm tall multicolor figurine inspired by the anonymous @r0ckstardev from BTCPayServer . The files include: 3mf files - Rockstar with Bitcoin B on cap 3mf files…
No supports needed. Check out Orange-Clock.com for more Information or buy an OrangeClock here .
Fits a small beercan perfectly.
The RockPro 4x Stack allows easy mounting of up to four RockPro64 single board computers. Each RockPro can be fixed to a slide using any M3 screws you have around. The slides use a dovetail joint for secure mounting and click into place…
A simple wall mount for a small Remington Hairdryer, with a hole for a hairbrush and a slot for a small comb. Fixed with 2 screws, although there are 4 holes if you think you need more. Saves some space in the bathroom and is surprisingly…
Print in vasemode and up the extrusion multiplier for best results.
Print the parts in the appropriate colors and glue together, add a LED-Stripe in the back and boom.
A simple and straightforward enclosure for the BitPi(ne)Rat by DTV Electronics. Prints without supports. Press Fit Lid. Requires four M3 threaded inserts. Comes with integrated Wall Mount.
Adapter to connect the 3inch hose from Xtool Lasers to a 120mm inline fan. ID of fan adapter side is 122mm, fits perfectly on my 120mm inline fan. Hose sits flush without the immediate need for clamps, although using clamps is probably a…
QuickLock PipeClamp A print in place clamp for ventilation ducts, pipes and other round stuff. I designed this because I wanted to route the exhaust hose of my xTool laser neatly along the ceiling and did not want to use ugly zip ties.…
Covers for the undersides of PSUBB & PSUBB Pruned . Use these if you don't use them together with the 3D-printed PSU Enclosure.
Small cover which wraps nicely around 15mm wire terminals. Safety first, kids.
A fan duct for the Bitmain Antminer S21 Pro & S21 XP models with an exhaust diameter of 8 inches / 20 cm. Since these models sport two 140mm fans, the model is quite large. So there is a two part version included, both parts fit on a…
Wouldn't it be cool if you could upgrade the cooling and performance of your bitaxe, simply by placing it in a better stand? Now you can. Upgrade any Bitaxe simply by placing it in the CoolAxe Overclocking Stand. Specifically designed to…
The Skull of Satoshi as a Dual Bitaxe Stand. Requires a Noctua NF-A6x15 Fan which is mounted in the bottom of the Skull to keep the Bitaxes cool. Feet to raise the whole thing up included in the files. This print needs supports, tree or…
Full set for efficiently ducting the intake and exhaust air of a Bitmain S21Pro or S21XP and its Power Supply. Files include Universal duct fitting both sides (just flip it over), Adapters for PSU intake and exhaust Features 8 inch / 20cm…
Snap Lock enclosure for the W5500 Ethernet Module with opening for RJ45 and the ribbon cable. Quick and easy print.
Hardwire all the things! The first Bitaxe Stand with integrated enclosure for the Ethernet Module which comes with our Bitaxe LAN Adapters . Print as oriented, no supports or special settings needed. Insert the Ethernet Module at an angle…
Hardwire all the things! The first NerdQaxe+ / NerdQaxe++ Stand with integrated enclosure for the Ethernet Module which comes with our NerdLAN Adapters . Print as oriented, no supports or special settings needed. Insert the Ethernet…
!! Big Print !! 292x235x23mm Build Volume Required The Parasite Stand fits the NerdQaxe+ & NerdQaxe++ open-source ASIC bitcoin miners. Inspired by Parasite Pool, created as a printable token of appreciation for having found Block 938713…
To wszystkie aktualnie dostępne wyniki.
