Liczymy pasujące modele…
This model is a simple way to mount an Upptvind filter. The key design feature is printability in one piece on most standard size 3D printers including Prusa MK4 and Ender 3 size printers. The end product can be free standing or hung up…
A slick case the Asus Zenfone 10, it features a separate part for covering the camera lens for better printabilty and a modifier body you can use for customization during slicing. The wall thickness in the model is set to 1.2mm and…
A Qidi Box Riser for the Q2 designed to fit over the OEM riser. Glass can slide back and forth, the riser will prevent the glass cover from going back too much (beyond the lip in the glass) regardless of the retaining lips. It has an…
Having dissemble the toolhead cover on the Qidi Q2 is a bit of a pain due to the need to disconnect the cable chain and the bottom belt being captured by the plastic casing. This mod takes inspiration form the model bellow but dose not…
My goal was to create a simple way to mount the speakers on the side of the desk such that they don't take up space on the desk and do not fall. This model introduces a base attaching to the speakers with screws and a tapered shaft…
A FreeCAD version of the T-Clip with locating pins for your modeling needs
Hang your test leads or cables from your Skadis board easily and do not sacrifice the area underneath them! You can access everything just swing away. The design is print in place, PLA or PETG should work well. to mount the hanger to the…
A connector for 3 broomsticks in a perpendicular placement. Print 2 identical units and connect with a 35mm long M5 bolt with wide washers on both sides. The connector can be mirrored if you desire a left handed axis placement.
Adapter that allows you to use front attachments for Kitchenaid mixers on older Kenwood mixer. An M4x20mm bolt and nut are needed for locking the Kitchenaid attachment in the adapter. I recommend you print the shaft at about 30 - 35…
To wszystkie aktualnie dostępne wyniki.
