Liczymy pasujące modele…
This is the male Bosch/Kärcher C35 adapter for a standard 32mm vacuum hose. Printorientation doesn't really matter. You should print a couple of spare clips. Sometimes you need to tweak it a lillte bit by scaling it in x and y by up to…
ATTENTION: You need to be able to split the tool along the Battery bay. You Need: 1x all 3 printed parts 1x (M)3x8mm countersunkscrew 2x (M)3x6mm allenkey bolt 2x 54x19x1mm metalstrip as contactors for the battery, need to be bend in…
These are spare parts for the TwoTrees SK1. The Backshroud got hexagonal cutout instead of the original “doted lines”. Backshroud and the Fanshroud got several cutouts so, that you don't need to remove the filament, the tensionknob, the…
This is a small addon filter for the back fan of the Creality K1. I've used 2 60x60x3mm activated carbon filters, for the 6,5mm Version You need: 4x 3x22mm (wood)screws 4x spacer or 2mm thick washers 1x Main 1x Guard 2/3x 60x60mm…
Work in Progress 24.01.2024 - I am waiting on my plexiglas panels 27.01.2024 - The first prototype is put together. I've discovered multiple promblems/fixes/improvements I wanna do. 27.02.2024 - Added a Model…
This is a small variation, just 35mm tall, of my big toplid for the SK1, this one is just laid on top of the printer. Its registered via the buttonheadscrews in the top. I did NOT print this Lid , but since it's a variant of my big lid it…
This is a drop-in replacement for the original dust nozzle. You need to transfer the original o-ring to the new adapter. I advise to print the adapter with the C35 side facing downwards. It is possible, that this adapter also works with…
Since I feed my filament from above, the original position of the FRS is not optimal. You Need: 1x M3x35mm countersunk 1x M3x25mm countersunk 2x M3x8mm buttonhead Except for the troughhole of the M3x35 screw you screw the other screws…
The adapter is used to work with the original non-HEPA Filter Cap. As seen in the pictures you need to cut off the end of the cap at the beginning of the venting slots. After this you need to glue in the adapter. Since the adapter is NOT…
Its a simple replacement for the original SK1 bowdentube guide, since the original one hat a much sharper turn than desired.
A 20mm riser for the base to accomodate a bigger fan. For the installation you need to follow the procedure shown in picture 2&3. Both parts are needed 4 times. Parts needed: 8-12x M3x5x4 Voron Style heatsetinsert for the Backplates. Ive…
An adapter for 120x15mm fan for the TwoTrees SK1. MCU Temp. dropped around 25°C BASE RISER NECESSARY One of the Parts can be used with magnets. If this is not desired you can either use tape to glue it to the frame or use the part to…
This is a powered male and female connector for the Dyson V6 vacuum cleaner. The connectors are now ca. 2 years in use. Both printed in PETG. There is an innertube and an outertube, to protect the electrical wiring and for stability…
A C35 dustextraction adapter for various Makita Sander with a dustport outerdiameter 22,5 mm.
The adapter has a female ID of 32,5mm to 31,5mm over 25mm. I've printed it in dasfilament PETG with the 32mm ID down and the Dyson male on the top.
This is a little mask holder for skihelmets
This is an advanced Drill Dust Collector with 2 different chambers. One for the vacuum to stick to the wall and one separate drill dust extractor to minimize dust sticking to the wall. It is required to put some foam around the separate…
A simple sparepart since I've lost mine.
Since I already own a Creality K1 and the Comunity is huge, was it a no brainer to make an adapter for the TwoTrees SK1 to use one of the awesome spool holders made for the Creality K1. Like:…
2 Different Mounts for the Creality K1 Cam to be mounted to the SK1 One is mounted to the right Top-Z Mount. The other is mounted to a M3 through hole in the front right corner. The FOV picture with the toolhead in the middle is from the…
A Simple holder for an auxiliary 12032 fan. Parts needed: 2x M4x8mm 8x M3x10mm 7x M3 Heatsetinsert 4x for the “crossbeam” 2x for the fan 1x for the duct 1x M3x15mm Duct I've used:…
This is still a work in progress model, the basic functionality is tested and works. I've used V1, shown in the photos, for 1 year now, as my main solderingiron, even though it was only intended to use it mobil. V2 has a couple of…
This is a simple 3rd Hand for soldering. You need the following Both printed parts 1x M6 hexnut 1x M6x50mm hexbolt 1x 20mmx3mm magnet After printing maybe you need to clean up the bore. The assembly is pretty straight forward, Place the…
Print it with the flatside down. The recess for the ziptie is 8x2mm. I've placed a doublesided foam tape between the handlebar and the mount.
This is a mod for the IKEA Jansjö LED USB Lamp Following things are needed: Ikea Jansjö USB Lamp 2x 851542/801640 LiIon batteries out of disposable Vapes USBC TP4056 BMS Miniature slideswitch 1x 20mmx3mm round magnet 2x M3x6mm countersunk…
A Remix of the normal bottom horn, 2 Voron0 LED mounts and a SHT36 Eddy Sensor mount were added. 1x Voron 0 LEDs 1x FLY SHT36 V3 MAX 2x M3xL3x4.5 Heatinsert x_offset: 0 y_offset: 26 z_offset: 3.64 I've used 0.1mm² wire to connect the LEDs…
This is a C35 adapter, that can be screwed onto something, for example if you want to do a diy dustbag like I did. The outer diameter of the screw is 45mm. For my DIY Dustbag I've used the Sebo Airbelt K , because I had them at hand. The…
Since I often forget to charge my Harman Kardon FLY ANC Headset so that they are, even with the nearly 20h runtime, empty in the least favorable situations and I've long envied the gaming headset with the charging docks. So I've made my…
To wszystkie aktualnie dostępne wyniki.
