Liczymy pasujące modele…
Mad props to @Br3akfstE4tr for the design and thanks for sharing the f360 file. I remixed this because the eggs my wife gets from her quail are just a bit too big for the original and while I was at it I made it print without supports and…
We designed this for the Icom ID-5100, so the defaults fit that radio, but in general you should be able to customize for almost any ham radio of roughly the same shape. You'll need a good ruler or calipers to measure the radio dimensions…
Huge props to the original creator @triton_9, I just remixed. This remix contains a few tweaks to the design; specifically: I created a female adapter so you can go the other direction The wooden track adapter/prong was too long for my…
When your seven-year-old son asks "Daddy, can you print me pinewood derby wheels?" there is only one correct answer, and it isn't "no". This wheel was designed using drawings of the actual wheels and should be dimensionally accurate.…
Kudos to @mdietz for the original design, this is just an update of the openscad source for that to make it easy to customize the size! Category: Construction Toys
I finally got tired of the silly gap left under nearly any third party antenna or adapter on the FT-60 (which isn't flat, so can't be filled with a simple washer) and made a spacer to go on it =] It may fit a FT-50 as well, not certain.…
This is a mounting bracket which fits the yaesu 8800, 8900, 7800, 7900, and probably others. When printed with ABS this is surprisingly strong (3mm walls probably help), but you will likely need longer screws than the ones you might (or…
Easily add powerpole connectors to a go box, panel, etc. There are a number of other models that solve the same problem that I found, but there were minor things with each I didn't love – I've been using powerpole connectors for a very…
This bracket is customized for the Icom ID-5100 radio; it may fit others, but download and customize http://www.thingiverse.com/thing:1656280 to customize for another radio! Make sure you use thick perimeters for strength! I recommend…
I like building lifepo4 batteries; one of the easier to find types of cells I've used are these 25Ah lifepo4 cells that I picked up from batteryhookup.com (they have had them from time to time). These brackets do a few things: Provide…
Customized version of http://www.thingiverse.com/thing:1424702 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1424702 Instructions Using the following options: plate_thickness = 2 pp_margin = 0.75…
This is a remix of the 24VDC laptop power supply enclosure; it fits the same DROK step-down converter but has no special plugs or anything. This is just a case to put it in with vents on the side and holes for power in and out. Should fit…
Customized version of http://www.thingiverse.com/thing:1424702 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1424702 Instructions Using the following options: plate_corners = 3 plate_thickness = 2…
Customized version of http://www.thingiverse.com/thing:1424702 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1424702 Instructions Using the following options: plate_corners = 3 plate_depth = 5 pp_depth =…
From the same people who brought you HamStudy.org, this is a customizable wall plate for anderson/powerpole connectors. You can make it handle as many as will fit on the single-gang plate. For the retaining pin to hold the connectors in I…
Inspired by https://www.thingiverse.com/thing:1418129 , this not really a remix, more done completely from scratch using the same general ideas. This one is a bit thicker than some prefer; I've done a remix with a thinner handle which…
Customized version of http://www.thingiverse.com/thing:1424702 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1424702 Instructions Using the following options: plate_thickness = 2 pp_depth = 25…
Ham Radio Operators may appreciate this: This is a very simple print which I designed because I needed to put a UHF/SO-239 barrel through the wall of my metal trailer. The trouble is that the trailer has a lot of electronics in it, some…
This is just a toy ottoscope I made for my 18 month old daughter. Nothing really special about it, but easy to print so I thought I'd share =] Category: Toys & Games
Customized version of http://www.thingiverse.com/thing:1424702 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1424702 Instructions Using the following options: pp_depth = 25 plate_thickness = 2…
Some at my gym prefer skinny handles (I'm not one) so I ran up a design which uses skinny handles =] Uses the same parts and requirements as the original that this is remixed from ( https://www.thingiverse.com/thing:3183887 ) For those…
For someone putting up a low cost repeater, the cost of a USB Radio Interface for any type can be steep. That's one reason I was thrilled when I found W3KKC's RA-35 -- only problem was, it didn't come with a case. Well, that can be fixed…
I liked 2ROBOTGUY's combo lock a lot, but I wanted something that would work as a coin bank for my kids -- which my kids too young to understand ownership wouldn't be able to get into. I made a remix that was bigger and had a coin slot,…
This fits this cashbox: https://a.co/d/2F6zHYv The box is available in several different colors and has a combination, which I like so I don't have to keep track of the key between events. The only issue is that I usually travel with this…
This is not something that most will have any use for, but maybe someone will think of a clever way to remix it =] I build these for use when building Signal Stuff Super-Elastic Signal Sticks -- we needed a way to hold the antennas while…
Remix of the combo safe; I've scaled it 2x in all dimensions and added a coin slot on the lid. I made this because my youngest son keeps swiping money from his older brothers and they wanted a place to keep it that he can't get into. So…
I build and sell ham radio antennas and I needed a good way to display them at my booth at Dayton Hamvention -- so I designed this. There are three pieces -- the base, the support, and the lip. The lip is optional, it just makes it look a…
To wszystkie aktualnie dostępne wyniki.
