Liczymy pasujące modele…
A very minor improvement to the screw mount remix of the honey comb screwdriver holder. This version Has fillets/chamfers around the outside edges to make it more pleasant to touch. The screw holes are slightly widened for M4 countersunk…
Wydruk około 2,58 €–3,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Customizable Parameters: Tooth Profile (GT2, HTD 3M, HTD 5M) Tooth Count Tooth Width (Belt Width) Bore Size Snap-Ring Size Grub Screw Size What you need to know: Printed in two parts. A metric snap ring/retaining ring (DIN 471) is…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a guide for tapping an M5 thread into the end of I-type 2020 aluminum extrusions. These are the type with 5mm slot width. The model was inspired by existing designs like this one:…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a cable mount for I-type 4040 extrusions (8mm slot width) which requires no fastener. Instead, it is inserted into the slot at a 45° angle and then rotated into either horizontal or vertical orientation, where it stays in place on…
Wydruk około 0,58 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Whistle not included! There are two variants: Signal-Whistle-Replacement.stl Version with cutout for a 42mm x 4.5mm (diameter) ferrocerium rod. Signal-Whistle-Replacement-Simple.stl Non-functional spacer part, just to keep the space…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
About This is a dust cap to protect GX12 “aviation connectors” when not connected. This variant is designed for plugs and flange-mount plugs. There is a 13mm hex and a slot for removing the dust cap with appropriate tools. Additional…
Wydruk około 1,03 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a modified lockring/adapter for the Perpendicular Drilling Jig by @poulanker. It fits the Bosch GSR 12V-15 (without FC!).
Wydruk około 1,40 €–1,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
About This is a label carrier/holder for devices that are mounted in ø22mm holes. This includes buttons, switches, pilot lights, and other indicators. Such devices are usually found in the front cover of a control panel. This carrier is…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wall mount for a SWISSPHONE Quattro radio pager charging station, type LGRA429/500/900 . Mounting Mounted using two holes with 95mm distance: Cable Management On the back and on the bottom, there are zip-tie attachment points for cable…
Wydruk około 9,23 €–11,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
About This is a blind plug to close unused ø22mm button/indicator mounting holes in control panels and other industrial operating stations. The blind plug is designed for a panel thickness of up to 5mm. This blind plug is not watertight…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
About In the industry, most machines have a stacklight so machine status is easily visible from afar. Let's do the same with a 3D-printer: This is a stacklight for the Prusa Mini+. It should be possible to adapt this to other 3D-printers.…
Wydruk około 7,46 €–9,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement for the mounting bracket for FESTO SDE5 pressure sensors . Mounting holes are for M4 bolts (or M3 with a washer). Distance between mounting holes is 20mm. Print upright for ideal strength, as shown in the demo G-Code. Print…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
About This is a two-part wall mount for the ABUS FEUERSTOPP fire extinguising spray. The spray clips into the mount and can be easily removed in case of a fire. Additional Parts For wall-mounting, appropriate screws are required. The wall…
Wydruk około 1,61 €–1,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement for the back cover of FESTO DSR-12-180-P rotary cylinders . Print as model is oriented. No supports necessary.
Wydruk około 0,34 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
About If you, like me, need fast and convenient access to a bottle of water from time to time, this is a wall mount for a 720dgree 0.5L (500 mL) water bottle. Other bottles with a diameter of ~65mm should work as well. Additional Parts…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
About This is a system of 3d-printed wire management components for DIN rail based electrical systems. Overview Features Cable combs for neat and tidy wire management Mounting brackets which allow running wires without ever needing to…
Marker strip for labelling Phoenix PT series terminal blocks.
Ferris, the crab , is the unofficial mascot of the Rust programming language. Now you can wear its crab hands on your head!
About This is a clip mount for mouting cable connections with GX12 “Aviation Connectors”. Multiple clip mounts can be connected to each other to mount multiple cable connections. There is a mounting hole for an M3 or M4 mounting screw.…
About This is an endcap to protect protruding ends of 27/18 C-profiles. It is meant to be press-fitted/hammered into the open end of the profile. Details Recommended Printing Parameters Orientation Print in the provided orientation of the…
About This is a mounting bracket for the BeagleBone Black & compatible boards. Combined with the SSR DIN rail mount , it can be used to securely attach the board to a standard DIN rail. The mounting holes for the BeagleBone are designed…
To wszystkie aktualnie dostępne wyniki.
