Liczymy pasujące modele…
These are mounting blocks to mount your makpac boxes to something. I built them to mount my makpacs to a roller board. They are designed to fit on a 300x400 mm board. To mount your makpak just press in the front side, and the push down…
I broke my sunglasses and I wanted to order a new frame, because the glasses itself had some diopter, but unfortanely mr.spex doesnt sell them anymore... So I tried my best and made a model. Its for use with the Polaroid PLD D343 807…
I just added a M6 nut inside of the Guide from GreaseMonkey88s Rod and Tube Cutter for Dremel (Thanks a lot for this Design!). I added a wing nut on the bolt to change the height without tools. I also made a version based on rckabs Rod…
Scalpel cover/lid for handle #3 and blade #11.
I added a step of the whole thing, if you need to improve/modify it. You will need the following parts: Makita Terminal Adapter (Search for Makita Terminal Adapter on AliExpress) OR: https://www.printables.com/de/model/200596 80W 5A WiFi…
Needed a simple filament sensor. I used the parts, I had laying around. Works well with hard materials (PLA/PETG/ASA/...) and with TPU. Not sure about more flexible materials. Endstop switch: https://bit.ly/3GQfsb2 Bowden coupler(1/8"):…
I needed a walll mount to mount our disneyland ears nice and tidy. Prints without support and includes a screw mount hole hidden on the backside. I had two diffrent kinds of ears, one with an 20 mm wide alice band and one with a 25 mm…
A mount for the Knipex Electronic Super Knips electronics side cutter(KNIPEX 78 03 125). With and without pliers icon print. Print with the flat side down and with support. Print Settings Printer Brand: Anet Printer: A8 Rafts: No…
While I started printing with resin, I needed paper towels to remove the mess. And because toilet paper was such a thing during lockdown, I decided to print a dispenser for single toilet paper pieces. You have to remove the inner…
This is my second attempt so build a portable soldering station for the makita LXT 18V battery environment. I improved the old version a little bit. It's still not perfect, but it works for me. There are some new features: ON/Off switch…
This is a box based on the design of original Stabilo box, which looks like a big Fineliner. If you are like me and have a lot of Fineliners flying around, you can collect them there. It can take up to 19 Fineliners (Stabilo Point 88) or…
I ordered the wrong type of tape for the office and needed a dispenser... I added a second Base without the honeycomb holes. The axis is a M5 x 35mm bolt with a M5 lock nut. For the blade I used a broken blade from a cutter and superglued…
+++ IMPROVED VERSION: https://www.printables.com/de/model/409700 +++ This is my attempt so build a portable soldering station for the makita LXT 18V battery environment. You will need the following parts: KSGER STM32 OLED V2.01…
A mountig enclosure for the Arducam IMX219 (SKU:B0196). It has a clamping feature, that it can be used as a webcam. The middle part of the arm now has two wings to avoid tilting. (Bein(2).stl) To assemble it, you will need 1 M3x15mm Screw…
Some feet for a spatula / spoon /ladle or for your good old Pfannenwender to keep your table clean. Looks like funny ckicken feet :) The spatula is not included. Print Settings Printer Brand: Anet Printer: A8 Supports: Yes Resolution: 0.2…
I screw a lot of BNC connectors at work. Usually I screwed them in with pliers, but that sometimes scratched the BNC. So I made this.
Just a wall mount for a M10 sisal scratching pole for my cat. It's good for building a climbing wall for your cat :) I used a pole from a cheap cat tree. But any M10 sisal pole should fit. I put a locknut into the cutout on the bottom to…
I was looking to remove the outer shell from some RG316 cable and had no good tool laying around... But I had a old pencil sharpener, a 3D-Printer and an idea, so this is what came out. I thought it was looking like a shark, so I added a…
A simple sunblocker for a microscope to block light coming from the side. The pictures are version 1, I will upload new ones soon. The microscope I use is a motic SMZ-168. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports:…
Just a simple Xiaomi Mi Mix 2 case. Printed in color changing PLA. Print Settings Printer Brand: Anet Printer: A8 Rafts: Doesn't Matter Supports: Yes Resolution: .2 Infill: 100% Category: Mobile Phone
My wife gave me a Mario Kart Carrera Go racetrack for Christmas because we both love to destroy each other in Mario Kart. The racetrack is pretty nice, but it lacked the Mario Kart lap/time measurement to provide the real experience. So I…
A small front cover for my 19" Raspberry Pi rack to cover the messed up hole. I simply hot glued it in place. Print Settings Printer Brand: Anet Printer: A8 Resolution: 0,2 Infill: 25% Category: DIY
The Handle, or the cats nose, is hollow, so that you can keep a spoon inside of the can Fits MACs Cat 400g cans. I printed it in TPU. Print Settings Printer Brand: Anet Printer: A8 Rafts: Doesn't Matter Supports: Yes Resolution: .2…
I needed a portable case for my soldering station do solder LED stripes on the go. I had a controller laying around and some 3S LiPos, so I came up with this design. You will need: KSGER STM32 OLED V2.01 Temperature Controller…
An attempt to repair my 720°DGREE replacement lid cap for “uberBottle“ or “simplBottle". The PC part/lid cap of my lid broke, so i tried to recreate it. It uses the original spring, the original gaskets, the original lid base and one m3 x…
I upgraded my Anet A8 with an e3d v6 Bowden hotend and used the Carriage from dldesign( https://www.thingiverse.com/thing:2077676 ). I like clean cable setups, so I designed this little addon to the new hotend carriage to tidy up the…
I liked the original design a lot but i was looking for a bumper style case. So I came up with this construction. Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Category: Mobile Phone
To wszystkie aktualnie dostępne wyniki.
