Liczymy pasujące modele…
Tubing end plug for a 22.5mm OD 19.5mm ID tube. I used this to replace a missing end cap on my bicycle handlebars.
Wydruk około 0,35 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
BTT-PI v 1.2 Two piece case for BTT Pi v1.2. Though this is my own design, I had a lot of inspiration from this design and highly recommend it if you need case for RPi 4b. Print with your desired material. No supports required. Print with…
A hexagon with a Skadis hole pattern. Works well with Skadis accessories. There are two versions, one with a spacer on the back to offset from the wall and one flat. For the flat one, you can use any of the numerous mounting options…
90 degree guide for the Dewalt tracksaw track. Print the track guide with 0.3mm layer height, 4 perimeters, 15% infill, and without supports, you will likely need to clean out the holes where the nuts go. The guide rail has a fairly tight…
This mount is designed to allow the Dewalt track to be mounted and secured to a vertical surface, such as a wall or garage door. The design allows the track to be mounted in a way that the edge of the splinter guard is not touching the…
I designed a simple circle cutting jig to be used with a trim router for cutting small circles and holes. This design is meant to be used with a 7/16" (11.1 mm) OD guide bushing and 1/4 inch spiral cutting bit. The cutting capacity is…
A miniature cat tower for a doll house. To print this, supports are required. Organic supports work best and leave a nice finish. This can be scaled to fit your needs. Use fuzzy skin with a reduced resolution to give the appearance of a…
I took inspiration from a design I found and modified it to fit my needs, changing the overall look slightly.
Version 1 I designed this to fit over the factory provided center console tray so I could add a wireless phone charger to my truck. It is designed to fit the Yootech wireless charging pad. The phone cradle is made to friction fit an…
A simple bracket to mount a TP-Link Deco S4 to the wall.
Two piece case for LIBRE AM-S905X-CC Le Potato. Though this is my own design, I had a lot of inspiration from this design and highly recommend it if you need case for RPi 4b. Print with your desired material. No supports required. Print…
This is a remix of the base for the Desktop Neon Sign by DIY Machines that simplifies the electronics components and allows the use of a simple circular toggle switch and a USB powered neon LED light strip. This remix will work with any…
Print with your desired material. No supports required. Print with the flat surface down. This was designed with tight tolerances so you may need to scale up slightly if using something other than PLA. Check out this article . There is…
A simple bag identification tag. Use the Text Tool feature in Prusaslicer to customize the tag to your liking. I use this as a bag tag for work. They look great using multi color printing. If you don't have a multi material setup check…
A simple cable clip to neatly hold cables onto EMT conduit. Great for camera power cables.
Use the text modifier in PrusaSlicer to add custom text or names.
Hardware (4) M3 Nuts (4) M3x8 Flat Screws (2) Zip Ties (4) Capture Nuts Installation Installation of this tray requires the ribbon cables and grounding cable to be rerouted. Remove all of the cables from the clips and remove the clips. If…
Legs to mount the UltiMulti unit to the enclosed CoreONE. Mount using M3 screws.
A simple mount for a Klein Tools wire stripper designed to be used with the Skadis system. Supports are required for the top peg, organic supports work perfectly.
The Wyze Night Light comes with a metal plate and an adhesive pad that allows you to stick it to the wall using the magnet in the device. My kids and pets kept knocking them off of the wall so I made this mount for the light to slide…
Drop in bins for the Harbor Freight Poly Bins Item Number 41949 Included are full sized bins and half sized bins that can be mixed/matched and stacked on top of each other. The stackable bins do not lock together. The drop in bins are…
This is a mount designed for the Wyze OG Camera that allows the camera to be mounted to and outside corner such as the legs on the Lack Enclosure. The bracket secures with screws or Command Strips. Removal of the factory supplied screw…
A mount for the Wham Bam Cloud that allows the use of two screws for mounting to the roof of an enclosure. This should be printed in a heat resistant material. There are two versions, one has a narrower side that may be safer should the…
Redesigned the tabs for the C1 magnetic cover to be more cohesive with the printer design.
Case for RPI Zero 2 W with additional space for heat sinks
This should fit the standard sized bottles, including those with an extended tip. Dimensions: ID 62 mm, OD 66 mm, H 65 mm
This is an alternative storage rack for the Harbor Freight Storehouse 10 Tray Utility Box SKU 40528. I made this so I could store the small storage bins that come with this in a drawer as I no longer was interested in using the factory…
This is a mount that allows you to attach the WYZE Cam OG to EMT conduit. Remove the factory mount and use an M4 button head screw (or other flat bottom type) to attach the camera to the camera mount. Tighten to your desired level of…
I remixed the linked design, adding holes to allow for the tray to be secured to the printer frame using M3 x 8 screws and a capture nut like this one . I removed the angled corners and the slots for the dividers to better suite my…
An updated version can be found here . This is a small mount that allows you to attach the WYZE Cam OG to EMT conduit. Remove the factory mount and use an M4x8 screw to attach the camera to the mount and clip it onto the EMT conduit.…
The factory solution for securing the side loading PTFE tube onto the extuder eventually causes the main cable to sag and become compressed between the extuder carriage and the X-Axis motor. This mod changes where the side loading PTFE…
A wall mountable plate designed to hold a SmartThings button. Remixed from: https://www.thingiverse.com/thing:3827965 and https://www.thingiverse.com/thing:5128845 Print with the show face on the bed, supports are not required if you have…
This is a small box to hold a Wemos D1 Mini, a DC Buck Converter and the wiring for indivually addressable LED strips. This is meant to complement the fantastic designs by In3DSpace , allowing use of addressable LEDs controlled by WLED.…
Solid side panels for the MMU3 buffer, designed for use with the Core One MMU3 system or to be surface mounted to a wall or the top of an enclosure (Lack) with the MK3/4 version. The solid panels secure the dividers using screws instead…
To wszystkie aktualnie dostępne wyniki.
