Liczymy pasujące modele…
A small robot-style doll with arms and legs that can bend, but only in anatomically realistic directions. I have printed these in ABS/ASA, but most kind of plastic should work. No support is needed. The joints are one-degree-of-freedom,…
Simple but effective support for plants that are not able to support themselves. Fits standard ⦰5 mm wooden plant sticks, but the size is configurable in the source code. You can use more than one support wheel on the same stick if…
This is a mathematically specified ghost. By changing parameters in the customizer, you can change the shape and other properties of the model. The default setting produces a thin-walled model which will print relatively fast. It will…
Two-part door latch to keep a door shut. Prints without support, preferably in PETG since it is more elastic than PLA. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament:…
Flexy is an articulated print-in-place doll with joints restricted to only allow anatomically realistic joint-angles to be reached. This makes it behave more natural (human-like) when handled as a doll. The model is an upgraded, and more…
This lamp shade is inspired by the original design by Poul Henningsen. In Sweden, it is called "Kotte" (the Swedish word for pine cone), and in Denmark "Kogle" (cone). Internationally, it is instead known as "Artichoke". An important…
This paper towel holder is supposed to be screwed (or taped) underneath an upper cupboard, so that the towels are easily accessible when needed, but out of the way when not. Print two of each part. No support is needed. Infill in the…
Use PETG or possibly ABS/ASA (PLA does not flex well enough). Designed to be printed without support. Note that one of the pieces should be reversed when connecting them.
Replacement cap for Presta/Racer bicycle valve. Precision of the threads may depend on the printer and printer settings. The threads are, on purpose, a bit loose. I have successfully printed this with a 0.4 mm nozzle and 0.2 mm layer…
Box for a single Keystone adapter. Can be used for a RJ45 adapter or other connectors that follow the keystone standard. Prints without support. Use 0.2mm layer height. Category: Electronics
I wanted to create a classic looking lamp shade with waves giving it a sense of textile. Designing it to be 3D-printable in one piece and without support was a challenge. The waves are sinosoidal in their outer part, but transform…
Wall hanger for the mouthpiece (with tube) of a Miele vacuum cleaner. I got tired of having the mouthpiece of the vacuum cleaner standing loose inside the cupboard. This hanger makes it easy to hang it onto the door. Update 2021-10-06:…
This compact case for three AAA batteries can be printed using only two meters of filament. Prints without support. You can print both the base and the lid as one print, but if you prefer (for example to use different colors) you can…
This ladder is designed to match Duplo bricks and figures. The top of the ladder is secured on top of a brick wall/tower. If the wall is four bricks high, the bottom of the ladder will precisely reach the ground. The vertical rails are…
Many plants need some support, not to fall. This hook is designed as a flexible way of stabilizing the stems of plants in big pots. Put a 6 mm wooden stick/rod in the middle the flower pot; then attach as many hooks as needed to embrace…
Clip to fasten standard 16mm or 20mm electric wire guide tubes to a wall or ceiling. Prints without support. Use 4mm screws to mount them to wall/ceiling. Category: Parts
Flexy ( https://www.printables.com/model/775352-flexy-an-articulated-print-in-place-doll ) needed somewhere to sit, so I designed an armchair and a table for that purpose. The armchair can be printed without support. The “lightning”…
Yet another cooling assembly for Ender 3. It probably also works for CR-10 and other Creality printers with the standard hotend. The part cooling "fang" uses superelliptic cross-sections, partly for airflow efficiency but not the least…
Trefoil knot extended into a candelabra. This model is based on my earlier trefoil model ( https://www.prusaprinters.org/prints/144385-trefoil-knot ). Normal 20mm diameter candles should fit. Best printed upside-down and with support.…
This is a stand-alone casing for the Duet 3 mini 5+ controller board. It is designed to stand up vertically and has room for a 40x40x20 mm fan to ensure proper cooling. The fan should blow air outwards, so that cool air enters via the…
Trefoil knot, stretched vertically to make it printable without or with very little support. Needs infill for the horizontal parts to close properly. It is challenging to print this. A good adhesion to the print bed is essential. The mesh…
Simple clip to hold an electrical wire to a round pole or tube. I used this to fasten the power cord to the handle of my electric lawn mower. It is probably good to set the tube diameter slightly smaller than the actual diameter to ensure…
The tiny 3007-fan of the Mini Afterburner is often not capable of providing sufficient cooling of the Dragon SF/HF hotend. One reason is that the fan only produces airflow around the edges while the heatsink of the Dragon is small and…
Print as many sections as you need. The pieces snap together (may need the help of pliers). Once in place, the pieces can be rotated like hinges so that you can construct arbitrarily complex buildings. The solid square is meant for floors…
Easy print with no support needed.
This is a parameterized, light weight, wine box stand. The height, length and width can be modified, as well as the thickness of the construction. The uploaded stl-files use height=150mm, width=95mm and length=190mm. You need twelve m3x6…
This is a stand-alone casing for the Duet 2 Maestro controller board. It is designed to stand up vertically and has room for a 40x40x20 mm fan to ensure proper cooling. The fan should blow air outwards , so that cool air enters via the…
To wszystkie aktualnie dostępne wyniki.
