Liczymy pasujące modele…
I really liked this design, but after printing it, I had to use a jewelers file on all the notches for them to fit & they were still quite tight. I created a sketch in fusion 360 with the base profile of this. Changed the notches from…
Update 1/8/2023 Someone asked for an option for 2 - V-slot 2060s side by side, so I added an option for 4060 & also a 4080 that will work for both 2x 2060 & 2x 2080. This openscad version is now Rev46 with 4 STL files for each option…
I remixed my Parametric Rigid coupler from http://www.thingiverse.com/thing:964671 to create this. It is essentially the same as that, but I took out a couple of variables that were specific to its use. There are probably a few other…
12/28/2020 Update: I added the file RP_200411_Servo_Z_Dual_X.cfg * that has my klipper configuration using the servo for the Z-axis for reference. Z-axis servo/Stepper motor Pen Plotter mount for V-Slot I needed a pen mount for the…
5/24/2018 I changed the files a little to make them more flexible in scaling to a 75% scale. I also added some extra M8 & M6 Nuts with 2 different tolerances in case my default .4mm tolerance is too tight for you. The full size version…
I designed this centering turntable to be used with my Horizontal / Vertical Laser engraver in Vertical mode. https://www.thingiverse.com/thing:4934772 There is a PDF Assembly guide attached for putting this together. Here are a couple of…
This clip is sized for GT2x6mm belt. I was getting tired of putting wire ties on assemblies that kept changing as my design changed. I looked for some simple clamps, but couldn't find something that appealed to me. I initially was not…
12/15/2022 Update: I made the openscad file more flexible with 5 variations & included the STL files for each. Just change the variable Type to a number from 0-4 for the different variations. Meanwhile Jack remixed this design to make the…
I changed the gap between the Target & passive Cradle from 0.3mm to 0.05mm gap. That was a nice fit for me. I added a test print for 0.05mm gap & 0.10mm gap as Cradle_Mod_05_Test.stl & Cradle_Mod_10_Test.stl . You will need to have…
I only wanted to print a few of these to see if it was useful for an idea I had in mind. The tolerances were too tight for my printer, so I redrew them in fusion 360 in single pieces so I could print just a few at a time. I do not have…
If you build this so it can also do vertical engraving, you might want to also make the self centering turntable to engrave cylindrical objects. https://www.printables.com/model/163956-self-centering-turntable-for-use-with-vertical-las…
Update 6/19/2020 I am currently redesigning the wheels & Wheel plate and adding spacers between bearings on the wheels. Also the bearing count will be 8 instead of 16 bearings since learning they are not necessary for the Wheel Plate. The…
If you are looking for a plotter with repeatable accuracy, this is not it. I was never able to get the accuracy I wanted with this machine, but was a fun project to play with. UPDATE 3/29/2023 There are 3 Assembly videos for this machine…
The original design of this was a little too tight using my printer. I simplified the connection to the extrusion & made it parametric as well as being able to use this with any of the V-Slot or C-Beam. I have only tested the 2060…
2/17/2020 Update I might be done updating this design now. I created plastic thumbscrew nuts for the 1/4-20x1/2" & 1/4-20x1" hex screw. Now I do not need any extra tools to tighten or loosen the recorder or pistol grip. The thumbscrew nut…
I liked this Kinetic sculpture https://www.printables.com/model/289583-kinetic-sculpture , but didn't want to tape it to the wall & realized I could use magnets on the base & place it on the side of the Refrigerator. I am using 10x2mm…
Video of engraving pi to 100 decimal places wrapped around a Bamboo Pen: https://youtu.be/ObtNYFsVEy4 Short video of this engraving a Bamboo pen, https://youtu.be/ybpt1YFTOgo Longer video engraving a Compass Rose on a Bamboo pen,…
Update 2/12/2023 : I added some links for quarters, dimes & nickels. The biggest problem I have with these is sizing them correctly for the coins. If you make it too loose, they can slip out. I you make it too tight, they are too…
6/21/2024 Update I added a Coils option tab which also does spirals, v2.0.0 6/10/2024 Update As of v1.5 , this program now handles English threads also. This is a python add-in for Fusion 360 to draw customized metric or English screw…
This is a remix of the A & B clamps from the Modular Mounting System to use phones with thicker cases. Thingiverse does not accept remix links for some reason, so I list it here. This is a remix of the A & B phone clamps from:…
Update 2/10/2025: Added a battery cover that someone wanted. There is a fusion 360 source file and a Bambu Lab .3mf print file for it as well. You will need supports for this print. After seeing a couple of YouTube videos of using a DIY…
I remixed https://www.thingiverse.com/thing:72097 to use with my rolling plotter. This can be used instead of the 6 O-Rings on the four wheels. That saves buying 24 O-Rings. I may add more styles later. Fusion 360 source file is included…
This is designed for a 6mmx9mm magnet. My magnet measures 5.85mm OD x 9.73mm thick. I have 3 different outside diameters, 40mm, 50mm & 70mm. You can either glue the magnet in place or change the fusion 360 file for a press fit if it does…
6/7/2021 Update: * I updated the Uno fusion 360 file to clean up the variables a little. Also added a STL & Fusion 360 file of a hinged Mount for the Eleks Mana V5.2 board. This is a remix of ttps://www.thingiverse.com/thing:1954625 , but…
This idea came to me a few years ago when I was taking a lot of photos of birds in flight. While thinking of a better way to follow fast flying birds, I was remembering my teenage years of hunting birds with a shotgun. The idea is…
This is the Planetary Bean Bouncer, an open-source DIY coffee roaster based around a stainless-steel flour sifter drum, driven by a single motor using a wobble disc and planetary gear system. The wobble disc converts motor rotation into a…
To wszystkie aktualnie dostępne wyniki.
