Liczymy pasujące modele…
For my vise mounting solution I "borrowed" T-nuts from another accessory and I don't like to collect parts when I work on something. As the claws are light duty use anyhow the T-nuts could also be made from plastic. Quick design, tested…
As I feared that the hotbed cable may break over time due to constant sharp bending I searched for a solution and ended up here: https://www.thingiverse.com/thing:4318284. I really liked the chain design but not that I would have to…
The first design which turned out to be a broom holder and not a broom dropper! Unfortunately the "gear" came off at the top but in the first print a small piece of scrap glued on with superglue fixed the problem This add-on is already…
Somehow I never got around ordering sanding pens despite the fact that I needed them on a regular basis. Perhaps the sanding paper glued on popsicle sticks worked well enough for the short moment of 20+ years.... But then I stumbled over…
The filament end sensor as installed on the Anycubic i3 Mega S is a bit of a problem. The filament is always pulled from the inner side of the spool which can lead to jumping filament when it comes from the outer side. These cracking…
As I am a woodworker too I had a need for a lockable bench-dog. In the past I made them from 20mm wooden rods but that was a lengthy job, mainly cleaning the lathe again, and they have the problem to be pretty loose with low humidity and…
I found this T-handle and liked the basic idea. However, looking at the files I recognized that the tip of the thread of the screw was screwed up in design (pun intended). Pretty simple, I corrected it in tinkercad. Then it dawned on me…
Unfortunately accessories are no longer available for my small lathe as it was last sold at least 20 years ago. It is a pre-China French made Minilor TR1 which was sold like todays Chinese models in different colors under different names…
As I never got the results I wanted with the usual Chinese or the other homemade sharpening jigs I was searching for a better solution and low and behold, I found it . Unfortunately the price was rather steep (but justified) and I thought…
Not that I expected miracle technology with a €139 printer but rather that it needs some TLC. One of the issues were that the parts cooling wasn't the best and the hotend cooling either required a very fast running fan (noisy) or it would…
Our basement windows urgently needed protection against the invasion of spiders if we wanted to sometimes ventilate the rooms. As the windows are only 90x40cm even the smallest type would have been far to large which equals a lot of…
Sanding belts are of much better quality than the usual sanding papers. That's why I have build sanding blocks from wood and purchased a commercial model. Now I wanted more of them to have a block for all grits I usually use. However, I…
For my solar system I needed a way to mount a 200A automotive relay on a DIN-rail. The clamp isn't spring mounted but held in place by two M4x12 screws and nuts. A bit less convenient to install but it is hopefully a one time operation…
My Anycubic Mega S has the V5 version as a standard but I wanted to install an all metal V6 clone. Unfortunately these cones are ~7mm shorter than the V5 and I didn't want to move the end sensors down. As temperatures at the top are…
As I was tired of the mess I had with some long power cables for yard work I decided it was time to fix the problem. Commercial parts I found either to expensive or to simple to be useful. You will need 2 of the shown part plus some 16mm…
Not because of the grand kids but of someone else we needed to protect the door to the kitchen/pantry. Always using the key and hiding it somewhere was a bit to much. That's why I designed a very simple but so far effective protection. An…
As my AG13/LR44 box turned out more useful than expected I also made one for CR2032 which also fits CR2016. It also got the hole for a Ø10x2mm magnet even though I don't need it right now but one never knows. Print Settings: Printer…
Instead of real DROs I use calipers on my lathe and milling machine . These operate with AG13/LR44 batteries and as I only hacked Chinese models the current consumption even in standby isn't the lowest. For this reason I quite often end…
For my 63mm vise I wanted a base which I can rotate. After searching for a commercially available base I only found some which would have cost more than I paid for my milling machine. A clear sign that DIY was required. Machining it from…
As I didn’t like the valve dangling around I printed a mounting bracket. Used PETG and painted it for UV protection. Printer: Anycubic Mega S Nozzle: 0.4mm Line width: 0.5mm Layers: 0.3mm Infill: 25% cubic no support Installed with 4x65mm…
The biggest advantage of the Ultrabase, prints stick extremely well to the bed, is also its biggest disadvantage. Usually one can only remove them once the bed has cooled down to 30°C. This can take quite some time as there isn't any…
As I got a new toy for my mini milling machine I needed some claws to attach the vise to the table. No chunk of steel large enough was in stock and as PLA printed in the correct orientation is about as strong as aluminum I opted for the…
Needed an IEC C14 outlet which should replace an in-wall mains Schuko socket. -insert was printed with tree support and -plate without. From an old Schuko socket I removed the metal frame where the printed -insert is mounted with two…
For my new vise with 63x32mm jaws I needed some accessories. Soft jaws: Printed in PLA with 0.3mm adaptive layers and 25% cubic infill with double lines. One with grooves, the other one plain. Parallels (bottom of vise has 53mm) in 10, 20…
Good ideas should be copied and not be re-invented. That's what I thought when I saw a nice solution on YouTube (video unfortunately gone) and needed it for a project, machining thin PMMA discs without a center hole. As one needs a life…
To wszystkie aktualnie dostępne wyniki.
