Liczymy pasujące modele…
Turn old filament spools into a functional cord wrap easily! Originally design with Prusament spools in mind, but updated to include an option for generic spools as well. There are three different ways you can build the cord wraps. Just…
See instruction video below. There is a large and small version. I printed them in PETG with 5% gyroid infill, but PLA would work just fine. EDIT: I had feedback that the tool should be wider than the strap. I made them as wide as the…
Cut up a pool noodle and make nunchuks! There is a 28mm and 22mm diameter versions for the two sizes of pool noodles I have encountered. Should be able to scale up or down either model to fit any noodle.
I added a set of trunnions to each side of the amplifier and a stand. The trunnions (pivots) are close to the center of gravity of the assembly. This means the tightness of the screws isn't as important. I used rubber washers to aid in…
Print in place nunchuks. May need a brim.
This kit card was designed to be sent with a 5"x7" Christmas card. The model is based on the flexible flyer style sleds . This is a branded version, the generic version files are available for purchase here.…
I've designed this handle to snap onto the scanner body, and secure it in place with a thumb screw. No supports needed, but I did use a brim to help the base stick. I printed it in PLA, but I'd almost recommend PETG. The thumbscrew is…
I wanted a pencil crayon case with flip up holders like you'd see on a case made for drill bits. The whole case prints in place. It can hold 24 pencil crayons. This is my first draft, and it could use a bit of refinement. One thing I'd…
A blank molle patch for adding text or logos. I've included a STEP file as well to make editing easier.
Bug-A-Salt clips in sideways under the pump fore-end.
A fairly exact replica of the stock large hood vent. Replaces Yamaha P/N: 8J9-77134-00-00 Since this is the hot air exit of the fan shroud, I'd suggest printing with PETG or better materials. Supports will be needed. Please share any…
A trophy for fishing tournaments. Modeled 6" long. Printed on .6mm Nozzle. .4mm Layer height.
This is a gutter cleaning attachment designed for use on Ego Power+ leaf blower. it has a profile that closely matches the stock tip, just with a 180 degree bend in it. Print Settings Printer: Monoprice Maker Select V2 Rafts: No Supports:…
A simple wall mount for a manual grease gun. Designed around an OD of about 58mm or 2.2" Optional files for a drip tray and hose clip.
Original model was created by scanning a “euro-mount” of a white-tailed deer buck skull. The antlers where singled out and converted to a voronoi pattern. Note: I haven't printed this model yet, so use your discretion.
Safely store your fishing rod without removing the lure with this handy case. The case prints in place standing up and can be pried open with a little force. Once the hinges are freed up the case can be held closed with the little catch,…
A replacement hood vent for the Yamaha Enticer 340. Supports are necessary for the overhangs of the tabs.
The two case halves are help tight by the band. There are two versions of the band. one with a clip for emery cloth, and another without. Many motorcycles and snowmobiles use sparkplugs with the same size as the BR9ES plugs shown. I've…
Very simple Zen garden. two rocks and some sand. Rocks were printed with support. I tried using fuzzy skin on the sand, but I think I needed it to be more exaggerated.
A drafting triangle that offers some transparency. Usually drafting triangles are clear so you can see your work below it, but that's difficult to do with 3D printing. Instead you can turn off the top and bottom layers in your slicer and…
Collapsible Nunchucks! The collapsible handles thread into the chain part. The chain prints flat with the flats own, and the handles print upright with the threads up.
Modeled 1mm tall to fit on a 200x200 bed. May require a smaller nozzle than the standard 0.4mm.
When I made my Pool noodle nuchuks I noticed that it may be a nice way to print pool noodle sword handles if bed adhesions in a concern. It may be stronger in this orientation also. The slice does impact thread engagement though.
A soft pad for a great shooting rest model
A remix of my original Green Hornet model found here. https://www.printables.com/model/372591-the-green-hornet I separated the colors into unique parts that interlock for multi- extruder printing. I didn't make the eyes interlock so that…
A Canadian flag molle patch for your back pack. Designed with multi material printing in mind. Likely it's best to print face down.
A simple little egg container for storing things. Prints without supports. Top may require a brim. Should be able to scale it up also. Edit (March 25 2024): I've added a two color version.
A simple clip for hanging tools (Drills, Impacts, Measuring Tapes) that have belt hooks. Printed upright with considerable infill in PETG. Holes are sized for drywall screws.
The narrow rectangular hood vent behind the windshield for a Yamaha Enticer 340 (ET340). Replacement for Yamaha P/N: 8J4-77109-00-00 Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category:…
Collapsible Ice cream Cone! Can be printed in one shot with a dual extruder machine to get the two colors. I used fuzzy skin to give it texture.
The two halves clamshell over an aftermarket LED headlight. It can then be mounted to the stock location using the original hardware. Printed with supports in PLA. Might recommend PETG for durability. The design utilizes M3 and M5…
The round windsheild defrost hood vent for a Yamha Enticer 340 (ET340). Replacement for Yamaha P/N: 8J9-77133-00-00 Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Automotive
I printed this out quickly with a 0.8 nozzle. The dowels work for alignment purposes but I had to use hot glue to keep the parts together. The main body warped pretty badly on me at the ends. I'd suggest a substantial brim on the inside…
If you print this on the large flat you can do it without and support, it should end up being stronger in this orientation as well. I used PETG at 100% infill. I would suggest something at least this strong, or stronger. I can't speak to…
Print in place chain Chain has and ID of 14mm x 19mm and a thickness of 7MM (See pic) Two of the models are for a length of chain that fits on a bed of 200x200 or 360x360. May require a brim if bed adhesion isn't strong. Should scale well.
A solid version of the badge that should be easier to make modifications to. EDIT#1 I noticed a void in the model, it has been fixed now.
Replaces Arctic Cat OEM part number 0116-466 Fits the following Arctic Cat models; 1977 JAG 1976 JAG 275 1976 JAG 340 1975 EL TIGRE 340 1975 EL TIGRE 440 1975 EL TIGRE' Z 250 1975 EL TIGRE' Z 340 1975 EL TIGRE' Z 440 1975 JAG 340 1974 EL…
I made this chainguard to keep my chain from getting stuck between my chainring and motor. I've been using it since 2021 and it's held up really well. It is held on my the stock motor case bolts. It was modeled around my frame and…
I was able to print this in one go on my XL, might require multiple sections on smaller print beds. I printed the part in White PETG with PLA as the support. Should Fit Brands: KitchenAid, Whirlpool, Jenn-Air, Kenmore, Amana, Magic Chef,…
A printable float bowl gasket for the Yamaha Enticer snowmobiles with a rectangular float bowl. I used Ninjatek Ninjaflex TPU (85A) I then covered the gasket with parchment paper and uses a clothes iron to smooth the top surface, This may…
These are my second attempt at mason jar inspired eyewear. The original Glasses can be found here; https://www.printables.com/model/500826-mason-jar-glasses I used two 4oz (125ml) mason jars, but I think any regular mouth jar would fit. I…
My dogs leash kept catching the end of our downspout, and I also wanted to direct the water away from the house. Designed around a 2X3" downspout at ~8 degrees from horizontal. I used concrete screws to secure it. I managed to print it…
Replaces Arctic Cat OEM part number 0116-467 Fits the following Arctic Cat models; 1977 JAG 1976 JAG 275 1976 JAG 340 1975 EL TIGRE 340 1975 EL TIGRE 440 1975 EL TIGRE' Z 250 1975 EL TIGRE' Z 340 1975 EL TIGRE' Z 440 1975 JAG 340 1974 EL…
This is my take on the 2-position reminder sign. The case is a hexagon shape so that it can be printed without the need for supports. The case may need a brim though. I placed the text on the lever face down wo that it would look crisper…
I used the design concepts found in Sanford Prime's ‘Koozie - Screw Top’ and tweaked a few things. I really liked the original, I just felt like courser threads would help screw the lid on easier, and I wanted to cut the finger grooves…
Replaces Arctic Cat OEM part numbers: 0116-829, 0116-311, 0116-572. Fits the following Arctic Cat models; 1977 EL TIGRE 4000 1977 EL TIGRE 5000 1976 EL TIGRE 440 1976 EL TIGRE 500 1974 VIP 440 1973 PUMA 1972 Cheetah 1972 Panther 1972 Puma…
Printed with supports in PLA. Might recommend PETG for durability. The design utilizes M3 heat-set threaded inserts. https://www.mcmaster.com/94180A333/ The M5 threads are printed. They may need to be cleaned up with a tap. It also used…
Designed to keep track of winners for fantasy drafts. The nameplates sandwich between the cup top and bottom with the use of a ¼" threaded rod and two nyloc nuts. The nameplates can easily be modified by adding text in CAD or your slicer.…
A custom keychain with the Arctic Cat Jag logo. Category: Automotive
This is a near identical copy of Matthias Wandel's Design found here. I added a smartphone holder that interfaces with the existing dowels. The plastic on plastic interface ended up being more slippery than wood on wood. I opted to use a…
My attempt at addeing some functionality to the badge design. Printed with supports on build plate Used with Mini Hygrometers found on amazon.com
Mountain bike disc brake rotor deglazing tool. I adapted the 6-bolt rotor to a Milwaukee hole saw mandrel to allow me chuck it on my drill press and make for a quick deglazing operation. This is by no means the proper or safe way to do…
The Console insert from a 1976 Artic Cat Jag 3000 May fit other models Arctic Cat Part #: 0106-514 Category: Automotive
Replacement Console Insert with Jag Logo Internal threads for #8 machine screws Category: Automotive
A little reminder to keep your fingers out of harms way Separate files for each color.
Use two different colors to make your nunchuks. Either with a hollow or solid handle. I scaled the parent design by 0.3 to get a set that would fit inside the hollow handle.
To wszystkie aktualnie dostępne wyniki.
![Chain [PIP]](https://media.printables.com/media/prints/912000/images/6967026_6fb8f205-d914-4b15-ae96-f93ecf894614_45a6b8f7-9016-4996-a759-f134afc32fd1/picture.jpg)
