Liczymy pasujące modele…
Available in three sizes: 40, 30 and 20 mm. I recommend printing with a large fill for a better dice feel, but it's not essential. Have a look at my other decision dice:…
Wydruk około 0,40 €–0,48 € nettoWstępna wycena jednego wariantu
A remix of the model Filament sample with box from Zahg . If you need the case for the samples, in the original model includes a great one. Direct downloadlinks for case : box_ top _ pla _v2.stl , box_ top _ petg _v2.stl , box_ top…
Changes to original model scaled up the model by 120% in Z removed/changed nose (now supportless printable) The difference can be seen on the second picture.
This is an remix of a pair of handcuffs, desingned by sthone. ( https://www.thingiverse.com/thing:2487050 ) For the finished handcuffs you'll need 10 'Handcuff_Pin.STL' to hold everything together. A small hammer or vice can be helpful.…
At the moment the LEGO flower post cap is availabel for posts with a diameter of 27.5, 34.5, 42.5, 48.5 and 60.5 mm. But if none of them fits your post it is very simple to scale it. Instructions are below. Check out my other postcap…
It is not my own design it is the Pin-Support Challenge by fullcontrol.xyz. Only g-code. I modified the start g-code to be the standart prime line and the end g-code to move the bed a bit. The most differece makes the speed increase up to…
Available in two sizes: 40 and 30 mm. Have a look at my other decision dice: https://www.printables.com/de/social/256636-seemomster/collections/164613 If you want to customize the cube for your preferences, the Fusion 360 and step file…
Available in two sizes: 40 and 30 mm. Have a look at my other decision dice: https://www.printables.com/de/social/256636-seemomster/collections/164613
The napkin rings have inner diameter 35 mm and a height of 25 mm. Two verisons: first one with an heart cutout second one without a cutout Print instructions The napkin ring with the cutout should be printed like this.
A remix of the very nice model iPlug by KMS by KERLE MAKERSPACE optimized for uvex x-fit earplugs For the joint you need a 15 mm long piece of 1,75 mm filament. Changes to original model -shortend by 5,7 mm -changed ratio between lid and…
Available in three sizes: 40, 30 and 22,5 mm. I recommend printing with a large fill for a better dice feel, but it's not essential. Have a look at my other decision dice:…
It is my first model designed with OpenSCAD. Check out my other postcap designs: https://www.printables.com/de/social/256636-seemomster/collections/185470 The 5 parameters are shown in this technical drawing. The bulge_factor is the…
The step files of the water cannon are uploaded for better understanding of the model. BOM: 98x M4x16 screw (14 less if the pipe_barometer is not used) 98x M4 cap nut (14 less if the pipe_barometer is not used) 196x M4 washer (28 less if…
The model is inspired by the “ Takeaway Decision Dice ” from dp makes, but completely fresh designed. Available in three sizes: 40, 30 and 25 mm. (on the photo is the 25 mm version) Have a look at my other decision dice:…
Der Würfel ist in 30 und in 40 mm verfügbar. Schau dir auch gerne noch andere meiner Entscheidungwürfel an: https://www.printables.com/de/social/256636-seemomster/collections/164612 Wenn du an dem Würfel noch etwas anpassen willst,…
from 2x2 up to 5x5 OpenSCAD
A small bit holder for your keychain. You can achieve a higher torque by inserting a key into the slot on the back for loosening or tightening screws. Printsettings Material: PLA Layerheight: 0.2 mm Parameter in Fusion360 loose fit:…
Der Würfel ist in 20, 30 und in 40 mm verfügbar. Schau dir auch gerne noch andere meiner Entscheidungwürfel an: https://www.printables.com/de/social/256636-seemomster/collections/164612
Der Würfel ist in 30 und in 40 mm verfügbar. Schau dir auch gerne noch andere meiner Entscheidungwürfel an: https://www.printables.com/de/social/256636-seemomster/collections/164612 Wenn du an dem Würfel noch etwas anpassen willst,…
With a speed up to 200.000 mm/s (720 km/h or 445 mph) and an acceleration of up to 400.000 mm/s^2 the DV6JP (double V6 Jetpack) Super Hero Joel can reach speeds no human could survive. He is a true Super Hero. The only downside is the…
Der Würfel ist in 30 und in 40 mm verfügbar. Schau dir auch gerne noch andere meiner Entscheidungwürfel an: https://www.printables.com/de/social/256636-seemomster/collections/164612 Wenn du an dem Würfel noch etwas anpassen willst,…
Available in three sizes: 20, 30 and 40 mm. Have a look at my other decision dice: https://www.printables.com/de/social/256636-seemomster/collections/164613
Available in three sizes: 20, 30 and 40 mm. Have a look at my other decision dice: https://www.printables.com/de/social/256636-seemomster/collections/164613
Check out my other postcap designs: https://www.printables.com/de/social/256636-seemomster/collections/185470 At the moment the octopus post cap is availabel for posts with a diameter of 16.5, 18.5, 22, 34.5, 38.5, 40.5, 42.5, 48.5, 60.5…
Available in two sizes: 40 and 30 mm. Have a look at my other decision dice: https://www.printables.com/de/social/256636-seemomster/collections/164613
Der Würfel ist in 30 und in 40 mm verfügbar. Schau dir auch gerne noch andere meiner Entscheidungwürfel an: https://www.printables.com/de/social/256636-seemomster/collections/164612 Wenn du an dem Würfel noch etwas anpassen willst,…
First roll which note with the dice (A-F) and then again with the matching dice to be more specific. Available in three sizes: 20, 30 and 40 mm. Have a look at my other decision dice:…
Available in three sizes: 20, 30 and 40 mm. Have a look at my other decision dice: https://www.printables.com/de/social/256636-seemomster/collections/164613
Zuerst wird mit dem “normalen” Würfel eine Note zwischen 1 bis 6 ermittelt und kann anschließend kann man mit dem zweiten Wurf kann das Vorzeichen bestimmt werden. Dafür stehen zwei Varianten zur Verfügung. Einmal mitels eines…
A six wheeled golf cart remix to store up to 4 of your revo nozzles after benchmarking your printer.
I remixed the Cap-RMS from SimenZhor . I printed his nice camera adapter , but had to find out that my lenses have a smaller thread. It is an adapter for microscope lenses. From M15x0.6 (?) to RMS W 0,8" × 1/36". I am not shure what…
a knurled LCD knob with 3 indentations
Available in three sizes: 20, 30 and 40 mm. Have a look at my decision dice collection: https://www.printables.com/de/social/256636-seemomster/collections/164613
Inspired by the fullcontrol.xyz Pin-Support Challenge and the Arc Overhangs shown by CNC Kitchen , I wanted to print a chrismastree diffuser with 90° overhangs without support and here is the result. The overhangs are nearly perfect flat.…
The replacement handle has a inner diameter of 11 mm for 10 mm rod and a length of 100 mm. step files included It was wrapped in electrical tape to hold the two parts together. To glue them should also work.
glued together and bend to the right shape using a lighter to soften the plastic
Der Würfel ist in 20, 30 und in 40 mm verfügbar. Hier gibt es einen kompletten Noten Entscheidungswürfelsatz: https://www.printables.com/de/model/220176-noten-entscheidungshilfe Schau dir auch gerne noch andere meiner Entscheidungwürfel…
This is a replacement part for the upper upper part of the closure mechanism.
I printed it in prusament ASA jet black to have a higher temperature and UV resistance. It is designed to mount it on a stem with a diameter of 32 mm. The part it self has a ID of 34 mm, because of the rubberinlay. needed materials -the…
FreeSlide has been developed specifically to reduce friction between the goalkeeper's leg guards and the playing surface during lateral movement, particularly in the butterfly position. If you want more information: https://freeslide.de
Der Block ist bei mir in Einsatz. Die Platte habe ich designed, da die mitgelieferte inzwischen stark angesägt ist, daduch das die eine Schraube keinen Halte mehr hatte. Habe es aber noch nicht gedruckt und weis somit nicht ganz sicher ob…
I designed a replacement roller for a bed. The outer diameter is 42.00 mm. The Fusion 360 and step-files are uploaded.
The replacement endcap fits the following lightbars: UKing 24*3W LED lightmaXX Vega BAR RGBW 24x 4W AFX BARLED18-PIX LED BAR 18 x 4W It is recommended to check the dimensions before to ensure that they match those in the technical…
M3x6 screw erco einspeisung replacement cover 79320.000
I designed a cover for the adidas deo body spray can to protect your bag from unwanted deo spraying.
To wszystkie aktualnie dostępne wyniki.
