Liczymy pasujące modele…
Diese Clips minimieren die Auflagefläche eines Mülltonnendeckels und verhindern so das Festfrieren. Paarweise gedruckt in Petg und custom-made für meine Sulo(?) Mülltonnen 80 L / 120 L und 240 L. Erste Leerung haben sie problemlos…
Simple case for an ESP32-WROOM-32 (38-pin, 28x55mm) NodeMCU Dev board with NRF24L01+ antenna board. Prints without support. NRF24L01+ module stay in place once antenna has been screwed on. I used a bit of blu-tack to keep the ESP32 in…
I found the regular feet of my Logitech MX Keys too sticky (I move the keyboard around a lot). That's why I printed the back raisers from Thingiverse (thing: 4877517) but did not find any raiser for the front - so I made my own. If you…
Replacement cover for Bosch eBike (Cube eMTB 2024) charging port. (Ersatzabdeckung für Bosch eMTB Ladebuchse.) v4 = flat bottom v5 = added a pattern for easier opening (not really needed) I suggest to enable ironing (all top surfaces). No…
Musste meiner IP44 Baumarktsteckdose auf dem Balkon (Südseite/kurzes Vordach) etwas unter die Arme greifen. Die obere Kabeldurchführung war brüchig und der ABS? Kunststoff des Gehäuses sah auch schon etwas mitgenommen aus. Beim Öffnen…
I´m trimming my hair in the shower and don´t want to leave the shower with hair all over my body. So I needed a place to put my hair trimmer while showering. I attached the holder with two double sided tapes onto the outside glas panel of…
This is a remix of the “Smart_Bottom-Horizontal-Front.stl” from @oftech_259079 . Inspired by the remix of @Nicias_404931 - thank you guys! Wall mount for Bosch Smart System Battery (PowerTube 500 (BBP3750), 625 (BBP3760), 750 (BBP3770)).…
Model is correctly oriented for printing, but you need to mirror the 2nd piece along the x-axis. Printed mine in PLA
Wir haben einen neuen Gaszähler (BK-G4T Pipersberg) bekommen. Um weiterhin den Gasverbrauch über AI-on-the-edge loggen zu können, musste also ein neues passendes Gehäuse für die ESP32-Cam her. Das Gehäuse besteht aus 3 Teilen: Body (das…
I made a 45 degree wall mount for the dia. 95mm “One Click weekly pill dispenser V2.0” released by Rober7Crow on Makerworld. https://makerworld.com/de/models/433967-one-click-weekly-pill-dispenser-v2-0?from=search#profileId-338755 I used…
100% loose fit, scale to 101% for tight fit V1: Bottom 12x30mm, Top 5x25mm V2: Bottom 12x30mm, Top 4x30mm (longer, angled top and does not block side holes anymore) I printed v1 in PETG and spiral/vase mode (0,8mm nozzle).
I lost two of the original buttons within the first week of wearing the clogs. I printed the replacements in ASA, but PETG should work fine as well. Button and Pin fit snugly, but I still added a drop of super glue.
Killed a few coils through accidental button press in my pockets. Therefore I created this cover that prevents accidental button press. It has a firm grip, but I added double sided tape at the bottom to avoid any movement. Yesterday I…
Multiboard holder for X7 Violent Turbo Fan (no support needed) You need at least 2 (better 3-4 so it won't sag) Multiconnect connectors like or
I made a thing that allows you to mount a Philips Aura to a vertical surface. The Aura bottom feet slide in with a rotational motion and hold the Aura very sturdy.
Replacement kerf insert for Scheppach HM90SL miter saw (Printed in PLA + ironing topmost surfaces)
I made a tray that can be attached to a P-touch P750W label printer with double sided tape (see picture). I uploaded different sizes 50mm, 80mm and 100mm long and a model with an opening on the left and on the right, per size. It should…
I needed a strain relief for some power tools that connect to an extension cable. I recommend to print in TPU with 75-100% infill and attach it to the cable/tool with a zip tie.
Clip-on diffuser disc for Philips Living Color Aura. Printed in transparent PETG.
Multiboard mount for a Leitz Esselte 5008 office paper puncher (Locher). You need 2x 13mm Small Thread - Flat Head - T-Bolt
I have a FOX Float DPS EVOL with a (broken?) lever that can rotate 360° and jumps from open to close very easily. As the rear shock works fine (except for the lose lever), I tried the rubber band method first, but that failed. So I…
This is a simple holder for Aldi’s version of the Scrub Daddy, called “Clean Buddy”. I made different sizes – the stated diameter is the actual diameter of the opening, so your faucet should be slightly larger. For example, my faucet has…
Printed in PLA without supports at 0.2 mm layer height. Tin can has an opening of 52x109mm.
A customizable maintenance tracker, where you can set a month and year (e.g. for next or last service interval). Originally created to keep track of my last water filter backwashing (Filterspülung), but I think this can be useful for…
Unser Viking MB650VE Rasenmäher hat einen Totmannschalter, der tierisch nervt weil man nach jedem Entleeren des Grasfangkorbs den Motor wieder neu starten muss (bei uns heißt das Akku abziehen, wieder aufstecken und anlassen). Dieser Clip…
Ersatz-Tankdeckel für unseren Viking Rasenmäher. Gedruckt aus ASA und danach mit Aceton geglättet. Aufgrund der Gewindeform habe ich den Deckel (wie importiert) gedruckt und Tree-Support aktiviert. Ich musste Layerhöhe auf 0,16mm und…
To wszystkie aktualnie dostępne wyniki.
