Front raiser for Logitech MX Keys keyboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raises the front of Logitech MX Keys Keyboard and makes it slide much more easily
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 192
- Wydruki
- 1
- Wyświetlenia
- 1729
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
I found the regular feet of my Logitech MX Keys too sticky (I move the keyboard around a lot).
That's why I printed the back raisers from Thingiverse (thing: 4877517) but did not find any raiser for the front - so I made my own.
If you want to avoid supports, you can print the raisers standing upright.
(Good bed adheasion required / the smaller the layer hight, the better the quality)
For printing flat, I would recommend supports.
Added a +5mm height version, which should bring the front of the keyboard to the same height as the back (if you don't use the back raisers).
Added a +5mm height version for the new MX Keys S (double sided tape needed).