ELEAF Mini iStick 2 Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for ELEAF Mini iStick 2 Battery Mod (eCigarette) that prevents accidental button press
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Killed a few coils through accidental button press in my pockets. Therefore I created this cover that prevents accidental button press.
It has a firm grip, but I added double sided tape at the bottom to avoid any movement.
Yesterday I dropped my first version (PETG) after a over a year in use and the bottom came off.
So I remodelled the part at the upper part and printed V2 in ASA.
I also added a small recess for double sided tape (acrylic) at the bottom.
After another 2,5 years I dropped it and the bottom came of again.
With v3 I made the walls and bottom thicker.
I think before this version brakes, the Eleaf will probably be dead anyway :-)