Liczymy pasujące modele…
Apply a mirror on the x-axis in your slicer to get the opposite variation (to fit them right above each other). Remixed from a remix on Thingiverse. Original was BramRausch with this: IKEA Skadis drill bit holder And the remix I used was…
Same as Joshua Smith winder, but 29mm shorter as I didn't need the extra screw depth. This means I can also use both sides with the drill… which will be useful when one side wears out. If using a small drill bit, I recommend printing with…
After printing a couple of boxes from Termlimit I saw that the source from Sttrife included the SCAD file, so got about making some extra configurations to suit my needs. Of small note... the groves along the outside are a little shorter…
Wanted to try TPU and aim to make a remote controlled buggy, so figure, why not print some wheels :). There's a hole to fit a screw and screwdriver through to bind the wheel to the axle. I printed in 95A TPU with 15% gyroid infill. It's…
IMPORTANT: Check that your slicer can open the lid 3MF file first! My slicer is Bambu Studio . It looks like Cura doesn't open it correctly, and I don't know why! Sorry! I've added a lid STL in, which has very very very slightly indented…
Great little print… check out the source from darzar :). This remix just adds a loop so I can hang it as a bauble on the christmas tree :) Printed on Bambu Labs X1, 0.2mm layer height. 6 hours at standard speed. 102g of filament, 66 of…
Model of an LD-220MG 20Kg Servo from HiWonder. This is more of something to include in your 3D designs, not necessarily printing. Created in FreeCAD (source files also attached). Print Settings Rafts: No Supports: No Resolution: 200…
A case for the Pimoroni RGB Keypad. Aiming to use it as a macro pad. My thoughts on where to go next... a display? Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Filament:…
Why charge one 18650 when you can charge up to 4 at a time! It just takes 4x as long of course. This also has a slight extension on the space available for the 4056 circuit, as the original design didn't fit the ones I have (which have a…
A chessboard that clips together. I've included: STL - colour it yourself in your slicer. FCStd - FreeCAD source file if you want to adjust it (created in v0.21.30143). Note when colouring it, you'll need to print 2 of one, then do the…
Note: I now believe that this robot might have a fatal flaw in the leg lengths being too long. Taking into consideration the torque generated by such long limbs, it becomes very difficult for this design to raise itself. However, I'm…
I made a big mistake and put my boards up, with half of them not being aligned with the other half… so had to push out a dozen or so inserts out. My thumb complained… so here's one with a little longer lever to go easier on the thumb :).…
Diffuser for the LED Strip profile for honeycomb storage wall by @MartinRejsek. Quite a tight fit, but should slide through the gap nicely, fingers crossed. Print one out as a test before you do loads :). FreeCAD v1.0 source file attached.
I took off the top layers on the “middle bit” and selected a sparse infill pattern of Honeycomb in Bambu Studio. I didn't want it completely hollow to the bottom, as I want to use it to dry after cleaning the glue off the bed, so the…
When winding or unwinding spools, especially with 3 in the same module, I noticed that adjacent spools would turn. This simple disc prevents them affecting each other. Print flat at 0.2mm layer height. It'll be two layers thick at 0.4mm.…
I wanted to learn more about the ESP32 and also use it as a transmitter for robots / buggies. Thus, the ESParto was born! Whilst the Esparto may be a little retro-inspired, it features: An ESP32 microprocessor “devkit” board to function…
Remix changing the height a little, now 10mm. Plus a hole for a circular foam pad of 18.5mm diameter (minimum of 3mm deep, or slap multiple in if less). Enables me to slide a thin heat-mat under the AMS unit. In my case, a 5W vivarium /…
Not much of a mod… its just the front handle with 3.2mm holes in it so a 3mm bolt can slide through. I've also tapered it a little so it can swing easily. I only have M3x40 bolts available, so they only go halfway into the handle on my…
Printed on Bambu Carbon X1, as an in-place with all 3 colours printed at once. Take care removing from print bed that you do not separate the frame when pulling it off. If it does separate, just add some dark tape around the edge of the…
A few variations on mounting brackets. I screwed mine into some wood I'd bolted into the wall. The parts labelled “THICK” are when I had some warping between the boards, to straighten them out. The parts labelled “TIGHT” allow my screws…
2.5mm nuts are a pain to screw onto bolts. Especially nylon standoffs, which can put up some resistance. This tool allows you to slot in a 2.5mm nut, place it over the bolt, and twiddle away until it's in place. The shaft of the bolt can…
See the fantastic original by Byte Insight for more info. I found the original is challenging to print with colour, as the letters are overhangs… so it drooped with the different colour material. I remixed it with the letters flush…
Want to hang some tubs off the end of your Ikea Hejne shelving? Is your shelving the 50cm deep version? does your tub have a lip about 1mm wide? Well you're in luck because all your dreams just came true... here's a shelf hook for your tub!
To wszystkie aktualnie dostępne wyniki.
