Liczymy pasujące modele…
This TPU strip fills the gap between glass door and frame. Two versions are provided: V3 is for ≥0.8mm gaps, V4 is only 0.4mm thick and is less easy to print but may fit better. Try a short section sample print and see which is best for…
Two dew shields designed for the 30mm ZWO guide scope (44mm diameter) and the generic 60mm guide scope (68mm diameter). They have an internal lip that prevents the shield from sliding too far down the scope. There are anchors for…
This cover protects the DC House 12V 100Ah terminals and provides some extra functionality. The cover clamps securely onto the battery but is easy to remove if you need access to the terminals. Its printed in PETG , I used Overture PETG…
Designed for quick fitting, it is sturdy enough for my 900gm Minix NEO Z100-0dB fanless PC. Hole spacing is 75mm. My mini PC comes with a metal plate which I bolted to the frame, the PC just slides on. Printed in PETG. The thread has…
It is a great mini PC but under a constant heavy load in the summer heat eventually the Wi-Fi stops working. This fan shroud clips over the case. The 80mm fan I chose is USB powered and has variable speed. I found the lowest speed was…
These two parts just fit between the OTA tube and the Steeltrack plate. They eliminate any chance of stray light and pack the space maybe aiding rigidity and squareness. Just loosen the plate and push these parts in on each side then…
This flat panel design features an inner sloping-wall to self-centre it for an OTA inner diameter of 160mm or bigger. It is built around an EL panel from El Wire Craft UK ( 16cm diameter EL Panel ). It is light weight and will easily sit…
Fan System This fan system is dimensioned to replace the glass rear top panel of the official enclosure, but it can be used with any compatible enclosure. Operation With the doors fitted the valves are open and chamber air is filtered and…
A simple clip for the LCD to mount on an Ikea Fredde desk. The 7" display is sold under many brand names on Ali-Express and makes a great Klipper screen. This is the one I bought “iPistBit 7 inch IPS LCD TFT Display HDMI Touch Screen…
Print both pieces upside down. PETG or TPU is the preferred material as it flexes around the OTA.
When you fit a camera or even a laser collimator you will notice the OTA flexing and collimation changing. This is because the wall of the OTA is very thin metal. This brace maintains the shape of the OTA and eliminates all flexing. I…
This design is part of my SV08 noise reduction project. The enclosure provided by Sovol looks nice but adds it own noise and the exhaust fan/filter is not good for ABS. I wanted a solution that allowed me to print ABS with low fumes and…
I had two problems with the OG adapter plate on my machine: the adapter rests on the belt bolts and not the carriage plate and although the dove tail works really well the assembly pivots by the cartographer bolts in X and Y. In this…
Print with 4 walls and 30% rectilinear infill. This design is strong in compression and will resist bending. By removing the ducts this remix should improve airflow at the back of the toolhead which is already cluttered by the jabberwocky…
A remix of some parts of the MMX MMU to make it easier to maintain.
The prebuild V82 Jabberwocky I received had the thermistor wires running over the mounting plate. I did not want to mess with a the build so this remix adds a small recess to the mount plate for them. Many thanks to Valarie Moore for the…
This tophat is planning for a future. Constructed of corner pieces and middle panels. Each section can be bolted to the SV08 frame. The pieces fit together like a jigsaw with a relaxed tolerance on the joints. This makes it very simple to…
Designed by request, I have not tried this version myself.
To wszystkie aktualnie dostępne wyniki.
