Liczymy pasujące modele…
I made an update to the CAD, to fix an issue with bridging the band, which I created inadvertently while making the change in size to the internal volume. I've also shortened the cap, as the smaller G6 module doesn't need as much padding…
This is a stackable mold for making rebar shoes, for concreting work. Documentation here: https://recyclopaedia.org.au/wiki/Mortar_Art_Rebar_Shoe Category: Hand Tools
Manual support included for fan outlets, some decent bridging required, but only in internal areas. Printing now ... hopefully it won't fail as it's a 24 hour print on a Replicator 2. Category: Tools
Modified to utilise an LJ12A3-4-Z/BX endstop sensor, and to fit around both sides of the main Z plate, to reduce motor wobble. There are also recesses to install M6 nuts, instead of using plastic threads. Additional holes in the design to…
I remodeled the model by nka, to work with my Nema24s, while reinforcing the two axis of the part. Worth noting that the mount plate is too thick to use the short bolts provided with the kit. Category: Parts
Printed parts to create a geared dynamo / motor, intended as a component for a bicycle, either exclusively for charging components, or driving an E-bike. A photo of a fitting test has been included. The intention of this test was to…
This is a draft file to demonstrate in CAD, the design suggested towards the end of this video: https://www.youtube.com/watch?v=geAjeDONnH8 For publication on https://recyclopaedia.org.au/index.php?title=Lucky_Hill_Farm_Biogas_Digester…
In early 2021 I decided that I was going to try to produce formwork (for poured structures such as concrete) out of recycled plastic bricks . This was in part because I'd heard that there's timber shortages, a crisis in plastic recycling,…
5 October 2019 V.3.5 - as most of the printed parts are replaced, I have added this as a separate listing; https://www.thingiverse.com/thing:3889891 25 September 2019 V.3.1b I currently have two V3 machines. The first (v3.1a) is…
This is currently a placeholder. I'll be finalising the project over the course of the next week, and uploading details. The reason for creating a new listing is that the changes to this model, are largely not compatible with the previous…
I had 10mm magnets, rather than the proscribed 9mm ones so I modified the diameter of the recess in Perinski's design. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25%…
The following are basic meshes of steel plates that could substitute the Alu parts proscribed in the build for the PrintNC. The 6mm thick steel tram plate requires that the back of the Spindle clamp is also drilled. I recommend test…
Basically provides space for a bearing on the motor arm, and a grooved bearing against the hob. Category: 3D Printer Extruders
The attached files show proposed geometry and test segments for a concrete brick with teeth that should allow Precious Plastic bricks to be placed on top of it. The mold files are intended to test shrinkage of concrete, so as to work out…
Most of the below is just for historical record. This is a deprecated design. See links below. M-bot v.2; https://www.thingiverse.com/thing:3045974 M-bot v.3; https://www.thingiverse.com/thing:3134348 M-bot v.3.5;…
Some parts for the PrintNC have bevels on the axis that you're instructed to print them on, which makes them difficult to print with ABS. These models have been oriented and de-beveled on the build surface side. Category: Robotics
150x150mm wide planters for arrangement on a windowsill of an appropriate size, with a reservoir underneath for water, and the option to plant either one full sized plant, or 9 seedlings. I may contemplate further modularity at a later…
Deprecated; see here: M-bot v.1; https://www.thingiverse.com/thing:2386365/ M-bot v.3; https://www.thingiverse.com/thing:3134348 M-bot v.3.5; https://www.thingiverse.com/thing:3889891 THIS IS A WORKING PRINTER Current Status: BOM lists…
https://untilweallbelong.com/ Category: Rings
Small improvement to the original idler arm for the Mendel Max 3 extruder, to improve printability, add a PTFE tube to the filament entry, and a wall for mounting and holding the T-nut in place. Category: 3D Printer Extruders
This part uses 2x 8mm smooth rods; of at least 250mm, 4x LM8UU bearings, and at least 3 rod spacers with set screws, to stop the travel of the rods at desired heights. The air hose and nozzle had 1/2" threading. End users might have to…
Over 3 years of use, a part from my MendelMax 3, which was part of the pre-release production run bent to the point that I got some motor skips. While MakerToolWorks has offered to send me out a replacement part for free, I live on…
Requires 4 nuts, and 4x20 counter sunk M5 machine bolts per shoe (8 of each for a pair) to assemble. The 50mm wide guard is designed to be wide enough for a typical female heel, while the 66mm wide guard is for men, if needed. This fix…
Improved geometry for more rapid production. Thicker walls where the part joins the mask, and manual support for the remaining parts that require it. Category: Other
Changed the bottom piece of UAVPilot1's model to be printed without support. Category: Camera
I found maddavo's fan duct to not function with the way I had my hot ends mounted. I made the following changes to adjust this part for my use: Widened the gap for the hot ends, to allow for hot ends with silicone covers. Made the portion…
To wszystkie aktualnie dostępne wyniki.
