Liczymy pasujące modele…
PLA is ok, I would recommend ABS because it has some flex. 0,2 mm Resolution 40 % Infill Tree-Support
This is a Echo Dot 4 & 5 mount for the corner of a wall. Only strong double-sided tape is required for mounting. No drilling, No support. It did print this with PLA at 0.3 mm, 15 % Infill,
Hi, this is a mount for the Arenti AiNanny Babycam. I did design 4 to fit on the Babybay bed and on universal (.step) for what ever you wish to do with it. I added one with a larger container for easy storage of powerbanks or other stuff.…
This is cake slicer for marking your cakes to cut perfectly symetric slices. I do provide models for 6 to 16 pieces. Printable without support.
This is a tool to unscrew or screw in a JR-Cache 21,5 mm filter from your faucet. Print Settings Printer: Anycubic Vyper Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: Creality PLA White Notes: Maybe with ABS, ASA or PETG a…
This hook should fit any 5 mm cabinet hole. I did print it with PLA, 0,12 mm layer hight, 100% infill and no support. I did hang some weights (6 kg)on it and it seems to have a firm grip and could hold even more. I did add a V2 for easy…
I did design this angels for our Wickeltisch / diaper changing table in our Pax Wardrobe. It did print it with no support, 0,2 mm, 50 % Infill. Propably the normal Ikeas hooks will do, but I wanted to be safe. Also when I had my 3D…
This is my Galaxy Tab A 10.1 2019 wall mount. I is designt for printing with a SLA LCD Printer. I did print it with Kudo3D Bean. You also will need 6x 5 mm screws to mount them on the wall. You need to adjust the space between the parts…
This holder is designed for the classic Beauty Blender or similar makeup sponges. It provides a neat and hygienic way to store and dry your sponge after use — no more damp spots on your vanity or sink! Support-free print – designed to be…
This is a holder for Gillette Venus that fits a sheet metal shower shampoo storage. No Support, PLA, 0.2 resolution.
Since the buffer for my wardrobe lift I bought on Amazon did break after some time I did reconstruct them for replacement. The do fit wardrobe lifts from Servetto. I did print it with TPU and PLA both work fine. TPU does buffer better.…
Für Campingtisch Bein-Gelenk z.B. wie hier zu kaufen. https://www.campingwagner.de/product_info.php?info=p26448 Ist bei mir in einem Gemieteten Sunlight verbaut gewesen und bei mir war die Arretierung gebrochen, daher hier das Ersatzteil.…
Tired of Skadis accessories snapping at the pins or requiring tedious supports? This Universal Skadis Mount is designed from the ground up to be the most durable and easy-to-print mounting solution for your IKEA Skadis pegboard. The…
With this part you can repair your broken off handle of your Kenwood KAH647. Just unscrew the screw at the bottom and the two screws holding the handle. Screw it to the printed part and your good to go. I did print it with 0,16, 4 Layers,…
When my original plastic piece melted on the heater coil of the dish washer, i printed this one so I can still use my milk frother. I actually like this one better then the original part, because the hold is larger and there for more…
This is a custom adapter designed to mount an IKEA Skådis pegboard inside an IKEA Pax wardrobe. If you have tried to mount a Skådis inside a Pax, you likely noticed that the hole spacing does not match up—the mounting points on the Skådis…
Our Eames Chair Replica chairs are a bit to low for us, so this is a thing to rais them 2 cm. You will need attionial M6x35 screws to replace the old shorter ones. I do not now if they will also fit the original Eames Chair, but they do…
I remixed the Anycubic Vyper Octoprint Clip. Now you can just clip it in, instead of sliding it in. No need to remove the cover. All the other parts you can get on the original. It did print with 0.15mm, 30 % infill and tree support.…
I did print this with PLA at 0.2 mm with 2 colors to be able to read the sizes better. No support needed. If you do not have a multimaterial printer it should be fairly easy to just use a marker.
This is a pouring aid for the Emsa Optima storage jars. I did add a V3, that is a turnable lid, for more easy everday use. Print V3 with tree support. Das ist eine Ausschütthilfe für die EMsa Optima Vorratsdosen. V3 lässt sich mittels…
The push button of my old old kitchen blender (Moulinex Moulinette S) broke. So here is a printable replacement. I did print it with low resolution 0,1 mm and 70 % infill. works fine. If there is anyone out there who may still usess an…
Das ist ein Umbaukit, um das Gestell des Cybex Priam Sportbuggy 3 mit dem Bezug des Priam 4 ausstatten. Leider gibt es den Bezug für den 3er nicht mehr zu kaufen. Die Schnalle des Sportsitz 4 und das SeatPack 4 muss man hierfür käuflich…
The Bosgame M5 Mini PC does not come with factory VESA mounting holes, restricting it to sitting flat on a desk. This custom, two-piece mounting system solves this issue entirely, letting you mount your Mini PC securely to a wall, inc. a…
To wszystkie aktualnie dostępne wyniki.
