Liczymy pasujące modele…
Remix of Honza200's USB holder . Two of the USB-A slots were replaced with A slimmer USB-A slot which can accommodate thin USB sticks, like a YubiKey A USB-C slot I did reverse-engineer the model, but all other dimensions should be…
This case is a remix from gurnarok's Pi 4 DIN rail case . It only includes the lower half of the case in order to improve cooling of the Pi. I also replaced the DIN rail mounts with two VESA 75x75mm mounting holes on one side, so it can…
This Adapter was made to fit a usb quick charge car adapter in an empty socket space in our camper. It shoud fit Berker B.Mobil frames (albeit with a bit of sanding). STEP and FreeCad files are included so you can use this as a starting…
Nothing apart from the original hotplate_bottom.stl has been modified. On this part, I added the Arca-Swiss slots in the front and back of the hotplate, so you can still use something like the Joby gorillapod when out and about. I printed…
This is a complete mounting solution if you wish to use the Smart Orbiter v3.0 on an Ender 3 v2 while keeping noise down by replacing the Orbiter's fan with a Noctua NF-A4x20. Additionally, you can mount a 5015 blower fan and CR-Touch…
The drive screws in from the back, then using some cardboard or other spacers the whole assembly can be screwed in one of the corners around the back of the case. Onshape Link:…
This model can be screwed to the underside of e.g. a shelf, so you can store the supporting rails that come with the Mafell Erika.
I needed a reference for a project I was making for the Erika, so I decided to model the saw in CAD. Parasolid file can be found on Grabcad: https://grabcad.com/library/mafell-erika-70-1 Onshape Link:…
Since I upgraded my Ender 3 v2 to use Klipper I could not use the old screen any more. This enables you to mount the cheap 3.5" touchscreen for Raspberry Pi to the side of your Ender (or any other printer that has a frame of aluminium…
Print two of the clips to mount the CZ-TAW outside the case. Ideally, PETG or a similar slightly flexible filament should be used rather than PLA. Useful in tandem with the Heishamon V5 Enclosure . Onshape Link:…
This mount is made to replace the original mount of a bike lamp/horn/powerbank/phone holder combo similar to this one . Many bike lights also use the same system, so it might fit those as well (your mileage will vary). It fits into the…
This uses a Makita bit extension inside (diameter 11 mm, length 78 mm). For the attachment point at the driver, remove the mechanism from another attachment (in my case the offset one, see last picture). Onshape Link:…
Onshape Link: https://cad.onshape.com/documents/5d99432b1814f4d878b594e2/v/d860c7e1164c17fb42d9dd78/e/f758f24269fd766ec45be299 This is a Remix of @FabianHaensch's great laser cut Masterspool V3 for Das Filament refills. I have kept the…
The footprint of this model is 2x2.5, so it essentially occupies 2x3 gridfinity units. The main compartment holds the Nitecore FX1 charger for Fujifilm NP-W126S batteries. I modified mine to take usb-c from the side, so there is a cutout…
This simply replaces the included mount from the Sigma Sport STS Speed Transmitter, since this does not work well on forks that are somewhat pointy. It can simply be attached to the inside of the fork using zip ties (run through the…
I made this model in order to attach an SSD in my LogiLink UA0041B USB enclosure to my Raspberry Pi. Since the Pi's case supports VESA mounting, I made it so that two of these holders could simply be slid onto the enclosure. When spaced…
The main part in this is the small adapter, it is just a friction fit onto the wiper (you may have to remove the swivelling part that is used by the car to attach to first). The handle can either be printed or just made otherwise (I used…
This cover can simply be snapped on to your Nitecore HC65 V2 to prevent the headlamp from accidentally turning on while transporting it. While not in use, you can store the cover by clipping it on to the opposite side of the headlamp, so…
To wszystkie aktualnie dostępne wyniki.
![[REMIX] USB/SD holder with USB-C and YubiKey](https://media.printables.com/media/prints/504690/images/4098551_575ff139-33b4-48a5-8163-62e704edca96/dscf9391.jpg)
![[REMIX] Raspberry Pi 4 Half Case VESA 75x75 mount](https://media.printables.com/media/prints/517762/images/4191144_9d52a3d7-4408-4336-aa1a-2d60ec4ed5c9/screenshot_20230702_004327.png)
![[REMIX] Arca-Swiss compatible Camera Backpack Mount](https://media.printables.com/media/prints/476353/images/3898064_32ecc056-d3a6-4554-90d9-5017347b3ebc/dscf9136.jpg)
