Liczymy pasujące modele…
Just a very simple SD and micro SD card holder that fits into a 1x2 gridfinity slot. Space for 10 SD and 16 micro SD cards. Added 13.09.24 - SD cards only - 15 SD cards.
Just a simple corner and side/edge block for consistent placing of stock on the TTC-450 board. Uses the same M6 bolts as the clamps that follow with the CNC. Print for stiffness - I used PETG with 4 walls and 15% gyroid - and it seems…
Storage for the tools and bits that come with the TTC-450 CNC along with TwoTrees extra bit set and also any other 3.175 and 6mm bits. Note that the tolerance on the bits holders are tight - I didn't want any chance of the bits falling…
Holder for the Insta360 X5 lens guards. Printed in PETG (PLA should also do fine), standard 0.2 layer height. The two lids should be placed top down - and they may be identical - don't know - I just modelled them in place - so I printed…
Storage for the smaller peak design bits - standard plates, anchor plates, links - as well as some bins for general use.
Just a simple hose clip to keep the pump hose under control. Note - I've tested on three hoses with the same appearance and apparent size (25mm OD) - one is loose, one is fine, one is tight. So - print a 5m height and test to check if you…
The playseat challenge comes with two plastic clamps to mount the pedal mount to the chair frame but still allow it to fold. One of mine broke - so this is a replacement. Uses M6 bolts - but still allows the chair to fold away. I printed…
I have plenty of right angle clamp guides for woodworking but for small scale work they are simply too large. These are just some smaller ones for using in fiddly locations. They are all 10mm by 10mm - the other dimension is the length of…
A simple gridfinity bin for a vice-versa (two-sided) tape measure. Note - the belt clip hangs slightly beyond the edge - which works for my setup - since the gridfinity plate its on has an extra border to fit the drawer its in (see last…
I have my spare bambu parts/tools stored in gridfinity bins - together they cover about 2 baseplates at 4x3 size. I wanted to store them under cover and stacked to keep the dust out - so I looked at drawers - but - some of the stored…
Remix of just the surface part from https://www.thingiverse.com/thing:3569302 to provide the bolt holes for the TH8A. There are several other TH8A remixes out there - but they also tend to merge the surface and outer bracket. I am…
Wanted a stand for the hex set from teng. The set has 2.5mm to 8 mm – but I also have separate 2, 10 and 12mm wrenches. The first version has a slightly loose tolerence on the joints between parts - so I uploaded a second copy with a…
I don't usually need to use the kase filter holder at the same time as the lens hood on my lenses. But - I use the Samyang (or Rokinon - seems to be the same lens) 135mm f2 lens for astrophotography - and in certain situations I am…
When not in use - the 55cm gym/sitting ball has a tendancy to roll around. This is just enough to keep it still - I was aiming for not too large a print - so - if you knock it then it will roll off - but left to itself - it stays put.
This is a small gridfinity holder for various keychron bits and pieces. A couple of bins for keycaps, plus space for the two different pullers that come with the keyboards. Created using openscad and…
Storage for thin, medium and thick glues with accessories as well as an activator bottle.
Holds a couple of USB screen testers - one for USB A - the Ruideng UM34C and one for USB C - TC66C.
Gridfinity bin to hold a bunch of ER11 collets. Since I seem to collect them and have differing numbers of some sizes - I went with just bins rather than shaped holders. Has metric from 1 to 7 in 0.5mm sizes plus 1/8" and 1/4". Also has a…
My VC500W printer came in a kit including one of each label width and a cleaning cartridge. They've been lying on the desk behind the printer since then. Simple gridfinity bin to store them.
Fits the 12mm bolt underneath the tripod and provides a small area for bits and pieces and 3 places to hang cables from.
To wszystkie aktualnie dostępne wyniki.
