Liczymy pasujące modele…
I wondered what a space filling curve might feel like to play with, so I made this. Even though it kind of looks like a space filling block, it is indeed just a single curve looped in on itself and thus can be printed in spiralized vase…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
I was experimenting with snowflakes in spiralized vase mode and came up with this flexible snowflake fidget. One surprising feature is that the fidget can be inverted to make a different interesting snowflake. It is printed with Prusament…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
This is a variant of the Gosper curve which forms a closed loop. Inspired by an idea shared by @Ema that used a different subset of this curve, I wanted to investigate what the space filling hexagon looks like inverted. Multiple copies…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
This fidget is based of a tiling of the plane by Koch snowflakes. Part of the reason for making this was to see what the Koch snowflake looked like when it was inverted. It is printed with Prusament PLA in spiralized vase mode. I set the…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
This model is printed in vase mode at 0.4mm and then turned inside out. This toggles back and forth between a “demon lord” and a bunch of hearts. Share it with someone who will be pleasantly surprised. Other heart designs I have made.…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To open or close, the twisting arms of the egg slide through each other while rotating. There is space inside to store a treat. Have fun! PRINT INSTRUCTIONS: I printed both the top and the bottom without support starting with the end of…
Wydruk około 1,65 €–2,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For the shower, I thought it would be great to tap into the honeycomb storage wall (HSW) system which has a ton of shelving options. This allows you to build your own shower system. I'm just providing a way to anchor it to your shower…
Wydruk około 2,46 €–3,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was unhappy with how heavy and awkward our Santa Lucia crown was. This was my attempt at making a lighter weight crown that was fun to wear. I have nine lighted loops to keep the same symbolism as the nine candles in a Santa Lucia…
Wydruk około 3,52 €–4,31 € nettoWstępna wycena jednego wariantu
Tensegrity is cool! I wanted to create a model that I wouldn't have to assemble, but would still display tensegrity in action. I wondered if the string art ideas people were using would work well enough for tensegrity. It turns out they…
Wydruk około 1,87 €–2,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This misleading temptation to construct the pyramid with the small pyramid at the top will not work. Finding an alternative path to a solution is not hard, but maybe a little surprising. This is a good 3D visualization puzzle for…
Wydruk około 4,12 €–5,03 € nettoWstępna wycena jednego wariantu
What would our standard cube packing puzzles look like if we used cuboctahedrons as the base unit instead of cubes? Obviously, when you are cutting wood, cubes are much easier, but we have 3D printers now! Stewart Coffin's Half-hour…
Wydruk około 7,11 €–8,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print in vase mode, preferably with a translucent filament. The minimal surface connecting the edges of a cube has three stable states. Each has a square in the middle, but the square can be perpendicular to the X,Y, or Z-axis. The…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PRINTING: Use vase mode with zero bottom layers. When making an invertible curve, it is natural to try and predict what the curve will look like inside out. And besides the circle, the results are often surprising. But what curves besides…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This cookie cutter is based on the fact that two different Koch snowflakes can tile the plane. This idea was suggested by @Daridam as an alternate use for the Koch Snowflake fidget . You need to print 5 (or 6 depending on your slicer)…
Wydruk około 3,92 €–4,80 € nettoWstępna wycena jednego wariantu
NOTE: These models are to be printed in vase mode with no bottom layers. After playing with some invertible models , I wanted to better understand how to predict the resulting shape after inversion. A circle clearly inverts to itself, but…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Best printed in vase mode with no bottom layers. Invertible four leaf clover. Present as the inverted puffer fish shape to a friend. They will be surprised when it snaps into a four-leaf clover right in front of them. Other spiralized…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
Part of a series of invertible curves . In trying to better understand what happens to a closed curve when inverted, I designed a couple of simple tests for circles. Pure math predicts a symmetric solution, but the curve has to pass…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I like this symmetric presentation of the figure eight know and I wrote some code to make Celtic knot.
Wydruk około 1,64 €–2,00 € nettoWstępna wycena jednego wariantu
This model is best printed in vase mode with zero initial layers. I find Rust to be an amazing language, and I am starting to try and use for 3D modeling. I wondered what an invertible curve of the name might be, and here it is. Enjoy!…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
I'm a big fan of the “Three Body Problem” series and wanted to make a Valentine's Day themed logo in the spirit of their logo. Other heart designs I have made. Printing: This print was designed for nozzles with 0.4mm width.
Wydruk około 0,29 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print in spiral vase mode. PLA and PETG both seem to work. To more easily invert the “G”, extend the inside of the “G” outwards to make a loop kind of circular, then invert that. Gathering for Gardner (G4G) is a celebration of Martin…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A series of nested hearts that twist back and forth: Designed to be printed with no support using a 0.4mm nozzle. Other heart designs I have made. Other fidgets I have made.
I was fascinated by the layered fidgets and wondered what it would be like if the shape twisted in addition to the vertical movement. Enjoy! Other fidgets I have designed.
I was interested in other ways of playing with a related model, the spinning star fidget. When the fidget is extended away from the rod, it looks like a flower. If the fidget is placed over the center rod, it makes a small squat tree. Fun…
I wanted a cool Prime Radiant prop that would simply print in one piece. I went through multiple iterations before arriving at this model. I had to simplify it to give it a chance of being able to print without support, which would be…
Prints great without support. Needed a triforce themed key for a costume. My other key designs.
Print two copies of the puzzle torus. They are designed to be printed without support.
I am a big fan of novel key designs. I thought it might be fun to make a Valentine's themed key, so here it is! Designed to be printed without support. Other heart designs I have made. Other key designs I have made.
Minimalist Nativity with Joseph, Mary, and baby Jesus. Created with help from my daughter. How I Designed This Built with Solid Python Solid Python -> OpenSCAD -> STL My source files are a bit of a mess, but I am willing to share them…
This is an experiment to see how well a radially asymmetric figure works as a fidget. The outline was expanded using Minkowski sums. Prints without support.
Wanted some Zelda dungeon keys for Halloween. These are quick and easy prints that don't require support. My other key designs.
Punisher themed key for Halloween or other events. My other key designs.
The model is made by extruding and twisting the Koch Snowflake into a Christmas Tree. This is the same fractal construction used in the Fractal candy dish . Vase mode is recommended. Can be lit with a tea light when printed in vase mode…
Beveled version of Deathly Hallows has an identical front and back face and is designed to be printed without support. Designed to be a novel link in a cosplay “Maester Chain”.
Koch snowflakes can tile the plane. This tree is made from scaling down the outer Koch snowflake while twisting it under it lines up with the largest inner snowflake. Then this process repeats with the nest inner Koch snowflake. Print in…
The Hypocycloid Christmas Tree is formed by sweeping out 5-hypocycloids inside of a 6-hypocycloid, as their size tapers to zero. The two versions use 2 or 3 5-hypocycloids respectively. This design uses the pattern of the Hypocycloid Vase…
A friendly skeleton key for Dia de los Muertos! My other key designs.
The trefoil knot is the simplest non-trivial knot. I'm making a series of 3D models to explore different presentations of it.
This triforce amulet is designed to be printed without support and has the same pattern on both sides. Designed to be an interesting link in a cosplay “Maester chain”.
Want to keep your active paints close to you and organized? This 8-bottle holder is easy to move and has a very small footprint. Inspired by spacecraft docking, this holder was designed to be stacked. While stacked, the upper model can…
The Conway Knot made news again after Lisa Piccirillo proved it is not slice. https://www.quantamagazine.org/graduate-student-solves-decades-old-conway-knot-problem-20200519/ https://arxiv.org/abs/1808.02923 I decided to make a geometric…
Designed to be printed without support. For Valentine's day I wanted to see three hearts woven together in the style of the Valknut. Other heart designs I have made.
Christmas tree design with multiple internal string bridges. See my other Christmas models . Printing: Not gonna lie, this was a challenging print for my printer. Make sure you have your bridging calibrated well. Good luck!
We lost our windshield wiper fluid cap. I designed and vase-mode printed a new cap that should pop over the top of the fill tube. The fit was pretty tight. I set the extrusion width to .8mm in the vase mode print and had it print 1mm of…
This sculpture is made by composing a series of cubes that are rotating, decreasing in size, and moving upward. All of these parameters are customizable. The bottom is truncated to give a flat base. This design prints well in normal mode…
Koch snowflakes can tile the plane. This tree is made from scaling down the outer Koch snowflake while twisting it under it lines up with the largest inner snowflake. In this model the twists are counter to each other. Then this process…
Cross sections of the Menger sponge have a pretty amazing star pattern. This model can print without support. Trying to remove supports would be terrible!
This stacking design uses a skull I designed for Dia De Los Muertos and copies, rotates and scales it. I'm interested in thoughts and comments about other things that could be tried. Printing: This should print fine without support. I…
This is a beveled linear extrusion of the iconic Rust logo. The gears do in fact mesh nicely! Printing instructions: I printed this in PLA without supports and everything worked great.
This design shows a torus split in two equal halves via a mobius strip. I positioned each half intertwined so they could be printed locked together.
I've always liked 6-sided dice with smooth corners. After making a smoothed 8-sided die, I thought it would work better with pips on the sides instead of numbers. Printing: This print works fine without support. I recommend printing at…
Inspired by the 5-hypocycloid that can "roll" inside of a 6-hypocycloid (as shown in the GIF). To make the vase design, the z-axis takes the place of time for a rotation. If you look from the right angle down the z-axis, you can see the…
I think salt pigs are cool, but not for $50 ! Why not introduce some more video game awesomeness into the kitchen with a Super Mario Brothers Salt Pipe instead? Make sure you print in a food safe filament, or coat with a food safe layer.…
Belgium is one of my favorite countries. I loved my time there and I wanted a medallion to wear as part of my cosplay to commemorate the Flemish Lion. Two versions are available. One with holes and one without.
Printing: The cube should print without support with proper bridging. I separated the objects and laid the tetrahedron flat on the print bed with my slicer. Design: This is a well known puzzle. I designed a new SCAD program in Rust and…
This eight-sided die rolls smoothly. Consider printing at 70% infill so it is more weighty. I make no guarantee about the fairness of the die. Printing: Because of the depressions for numbers, I found it useful to print with tree supports.
Apollonian circles cut into a torus with no center hole. Designed to be an interesting mathematical styled link for a cosplay Maester chain.
Designed with my daughter to show her how to make a simple character with bridging and overhangs. Great first project to try with SolidPython/OpenSCAD.
A cube can be cut in half along a diagonal hexagon. When a Menger sponge is cut in half along the same diagonal, a new fractal emerges. The face is similar to a Sierpinski carpet, but with hexagrams instead. The bar can be printed…
Moon jellyfish are beautiful translucent creatures. I wanted to try and make a vase mode print that was similar. PRINTING: Print upside down Clear PETG Vase mode (spiralize) Print only 2 initial layers at .2mm Z-layer height
This amulet has beveled edges, so the front and back are the same. Designed to be printed without support.
This is a smoother version of a previous 8-sided die which avoids corner edges between the faces. Print at 70% infill for extra die weight.
Part of a series of experiments trying to find novel dissections of common shapes that can be printed without support. Print two copies, preferably of different colors, and then spiral them together!
My friends son lost his drill bit to the “Think Gizmos take apart racing car”. So I designed a new one for him. Sharing in the hope that this helps someone else in the future.
Printing instructions: For a .4mm nozzle with layer height of .2mm, print four layers before starting vase mode.
Spiral cut the cuboctahedron into two identical pieces. Configuration designed to be printed without support. This 14-sided polyhedron puzzle was given as a gift to celebrate my father's 1/14th of a millenium party.
I bake a lot of bread and I needed a more ergonomic scoop for getting flour out of a large bucket. This works like a charm and I can print as many as I need. Let me know if you find it useful, or if you have a slightly different need,…
This is the puckered trisection of the cube. There are an infinite number of cube trisections into equal parts. This is part of a series exploring these trisections. Puckered trisection Skew pyramid trisection Two pyramid trisection Small…
After reading about the new cornerless 3D tilings (soft cells), I wanted to play with one physcially. https://www.scientificamerican.com/article/mathematicians-discover-a-new-kind-of-shape-thats-all-over-nature/ The point is that this…
This is a variation on the linked tori . I have been playing around with twisted movement. I think this sculpture looks nice and is fun to play with.
This is the small pyramid trisection of the cube. One interesting feature is that the exterior looks the same as the Double skew pyramid trisection even though the interior is different. There are an infinite number of cube trisections…
This model Christmas tree attempts to capture the elegance of the golden spiral as it twists and contracts. I'm sorry the model file is so large. I wanted the spiral surface to be very smooth. See my other Christmas models . Other…
This is the skew pyramid trisection of the cube. This can print in vase mode. There are an infinite number of cube trisections into equal parts. This is part of a series exploring these trisections. Puckered trisection Skew pyramid…
I wanted to illustrate multiple iterations of the Koch Snowflake fractal in one 3D shape. Each level transitions to the next iteration. The bowl is designed to be printed in vase mode. This uses a similar fractal construction to my…
I wanted to extend the classic 3-piece burr puzzle to look like an Easter egg. It does work, but there isn't a lot of space inside. I'll have to think of a redesign with more space. The OpenSCAD code was generated with rust code using the…
This puzzle was designed in 2013 by Japanese puzzle designer Yasuhiro Hashimoto. I am interested in puzzles made of multiple copies of the same piece. This is surprisingly hard for a 3 piece puzzle. I created this with a CAD program I am…
This is the double diagonal trisection of the cube. One interesting property is that the exterior looks identical to the small pyramid trisection even though the interior is different. There are an infinite number of cube trisections into…
I lost the plastic "clips" that go around the shelving poles and decided it would be easier to design and print new ones than to order new ones. I hope this is also helpful to others. Printing: I recommend printing one to make sure it…
Inspired by Helaman Ferguson's Four canoes . Two tori can be joined and then rotated inside each other. A variation of this design is the Twisted linked torus . I modified the design so it could be printed without support. It also has a…
Bow tie with a notch that slips over your top shirt button. Even though the fractal design is squished, it has the correct perspective from the front and looks like real cubes. The bow tie is designed to be printed without support.…
Two identical pieces snap securely together to form a ball. When putting it together you have to make sure all four lips are simultaneously over the opposing edge. Then it will slide and click into place. Taking it apart can be a little…
I thought this might be a way to visualize successive iterations of the Koch snowflake stretched over space. This model pushed this limits of what OpenSCAD can do. I used python to create STL directly for most of it. Obviously, bridging…
This is the two pyramid trisection of the cube. This piece can be printed in vase mode. There are an infinite number of cube trisections into equal parts. This is part of a series exploring these trisections. Puckered trisection Skew…
The Reuleaux triangle can be used to “drill” almost square holes. I tried the capture the beauty of its double rotation over time in the z-axis. The fins provide a visual framework for the square boundary it is rotating in. Other…
Knee Rovers are great for getting around while recovering, but I wanted something more useful than a basket to carry things with me. I designed this tabbed holder to fit over the top of the center steering column of the Knee Rover. The…
Since the sum of the cubes of 3,4,5 equals 6 cubed, it is possible to have a dissection which builds either. See discussion here . This dissection by Noam Elkies achieves the minimum number of pieces (8). Printing: The puzzle should print…
Chalcraft Torus A torus made from pieces that are the union of cubes. 5 pairs are needed to build the torus. Maintained at: https://github.com/SmoothDragon/ChalcraftChain Construction Print five pairs to construct the torus. Overlay…
A friend of mine needed some bases for a broken clothes rack stand, so here we go. They will probably ask me for another 4 year from now, and this way I will be able to find it! :)
The Reuleaux triangle has the fascinating property that it can be used to drill almost square holes. I scaled this path down to a point while extruding upwards. See my other Christmas models . Printing: This print requires no support. It…
I needed the legs of one my IKEA tables to be longer. Putting it here in case it helps someone else.
A friend of mine crafted a beautiful 3D puzzle cube out of wood. I wanted to present it in a more stable way. The base is made from the union of two truncated octahedrons. The puzzle is a handcrafted wood puzzle made from purple…
The design goal was to combine two hexagonal symmetries, the Koch snowflake, and a circular arc flower, as two sides of a coin. Done for the PumpkinJam competition. Printing: Prints without support, but maybe the bridging would look…
My daughter wanted something to honor the Japanese heritage of her fiancee, so I designed this napkin ring based on the やばね/yabane pattern which symbolizes steadfastness and good luck. The pattern is used on many wedding kimonos. Because…
A simple design to keep our self-closing door open at certain times. I included the OpenSCAD source (which I actually generated with Rust code, but Printables won't let me upload that) so others could make additional items that would…
These are transitions printed for a friend who designs and launches very large rockets. I'll post a picture of the finished product here when done.
This dissection by R. S. Wheeler was printed in Lindgren's Geometric Dissections (1964). Also see the other 6-cube dissection using only 8 pieces by Noam Elkies.
To wszystkie aktualnie dostępne wyniki.
