Liczymy pasujące modele…
I made it in two parts to separate colors parts. The original file works perfectly but with my Prusa Mini, it was not possible to have the ears colors, so I modified a bit the shape. Print in PETG Black and PLA white 0,2 layer height. I…
I needed a carabiner for few things at home and wanted to create mine so there it is. Printed with PLA, 15% infill, 0,2 mm layer height. No support and only 10gr of material. Tested with 15 kg load and didn't break but of course never use…
Wanted to replace paper labels by something prettier so there it is! I used the prusa slicer tool to writte what I needed, easy to use and a lot's of typefaces! In the files you can find my personal set up but if you want, you have the…
Hangs your lamp on the ceiling hook and allows for height adjustment. Print settings: PETG, layer 0,2 mm, 100% infill. So practical to print it than buy it!!! Enjoy
Simon's Cat to hang on a door furniture.
Print settings : PETG 40% infill, 0,2 Layer height, no support. Installation : 3 clips 16 mm and 4 clips 22 mm, a piece of pallet wood (here 432 x 80 x 18 mm) and few screws. When assembled, open the SPÄND leg, slide the support and plug…
Made in PETG, 0.3 layer height, 30% infill. Finally...the drawer is no longer a mess.
Hi, I repaired my old Kitchen Scale by drawing and printing the foot. PETG 0,1 mm Active supports Very proud of the shape and a new scale!! Enjoy.
After I discovered the brilliant magnetic model of @Ben, I wanted a docking part for it to finish my drybox setup. For this system you will need: PTFE PC4-M10 connector 6x3mm magnets (4 for each connector+4 for the endcap) A spool of TPU…
Needed a PTFE sealed grommet with PC4-M10 connection. @PeterMain model was well designed so I used it for my project. The connector and the nut are print in PETG For the seal, I used TPU A95, a cheap one from amazon.
I propose here a Prusa Mini Front Plate of replacement multicolor but print with your Prusa Mini. There is no change of the general shape, only of the front. Print Instructions: I used a method learn with the work of: @fuchsr The method…
Hygrometer support for Ikea Platsa furniture. No screw needed. Think to activate support in your print settings. Hope it will be usefull.
If it's the first time you will print multicolor part with your Prusa Mini, take the time to read and enjoy. First, simply open the 3mf file, adjust your filament choice if needed, and slice it. The 3mf file is configured to mimic a…
First, I invite you to download the nice model of @dym801: Personally I resized it on z to have the height I needed. After that I used the great model of @sjugge and modified it to be used on a vertical mount. Print setting: PETG, 0,2 mm…
Printed in PETG, 15% infill. Hope it will be usefull.
To wszystkie aktualnie dostępne wyniki.
