Liczymy pasujące modele…
Router fits snugly in the jig with its stock base plate installed for quick jobs. The bolt pattern allows the jig to be fixed to the router using the router's stock base plate screws. Sliding mechanism allows for infinitely adjustable…
Remixed this design. I liked the size and the hinge from the original design, but wanted to make sure the booklet would stay closed. I extended the case slightly to accommodate 2mm x 6mm rare earth magnets. The depth of the hole was set…
Printed with 5 base layers, 3 perimeters, 0.4mm nozzle, 0.2mm layers, PETG (other materials could work too) Printed buttons and text in separate color. Remove the colors in the 3MF file if you can't print with multiple colors.
Small desk organizer in the shape of an amp that I found over at Thingiverse (linked in this part submission). Fun build! Printed in PETG b/c that's what I had on-hand. Adjust the infill type and fill % for the front grill for various…
Printed in PETG. The fit was ever so slightly loose in the Squire Strat guitar tuner holes. One layer of blue painters tape made up the difference and it worked great. Recommend marking your drill bit to the proper depth with some…
Designed this switch blank adaptor to hold a dual USB extension cable for an aftermarket radio installation in a 1st Gen Tacoma. This adaptor avoids having to modify the original OEM switch blank part. The adapter has small clips that…
Printed with the Prusa XL in PETG, 3 perimeters, 0.25mm layer height, structural preset. Attaches to frame with two M4 screws into slot-nuts. Model includes clamping plate that uses two M4x10mm screws and M4 nuts.
Attaches to the bottom of a Strymon mid-sized pedalboard (blueSky tested) using the factory screws. This version has two tabs on the side for M4 screws for attaching to a 2020 extrusion pedalboard I designed. Velco could also be attached…
Made to fit a 3/8" x ¾" miter slot on a Kreg router table to hold jigs and such. Printed in PETG, 100% infill, a few perimeters, 0.2mm layer height. Uses a 5/16-18 counter sunk screw for taper clamping mechanism. Pictures show a Rocker…
3 perimeters 15% infill Printed with PETG No supports required Iron top surfaces (optional) EDIT: Replaced model file with corrected file. Original file had mounting holes at 5mm apart, but was not on a 5mm grid. Changed spacing for 5mm…
Allows easy mounting and rearrangement of a Walrus Audio guitar pedal on a pedal board made with 2020 aluminum extrusion. This design was tested on actual Walrus Audio pedals, but where the pedal is more or less a standard size, it may…
Summary This is a case for a EC Buying STM32H7 development board. The part number on board is FK723M1-ZGT6 V1.0. Purchased Parts The board was purchased from Amazon , but looks to be available on AliExpress, etc. as well. Qty 4 - M3.0x6mm…
No supports required. 0.2 layer height 2-3 perimeters Printed in PETG for outside mounting in weatherproof box
Printed in PETG with ~4 perimeters, 30% gyroid infill, 0.2mm height, speed setting. Organic supports were used for the counterbore holes on the bottom. However, the counterbores were not that deep, so the support material was a little…
Included an SVG of the Wampler logo on the bottom so it's easy to know which pedal it fits. Remove the SVG with PrusaSlicer if you don't want it or can't print it. Model allows attaching to my pedal board with M4x6mm screws. Velcro could…
Attached to the Fender Engine Room LVL 8 power supply using the factory screws on each end of the unit. Used to attach to my 2020 pedal board. Attaching holes are sized for M4 SHCS. Printed in PETG. 0.6mm nozzle on the XL. A smaller…
Attaches to the bottom of a Strymon large-sized pedalboard (e.g. Volante) using the factory screws. This version has two tabs on the side for M4 screws for attaching to a 2020 extrusion pedalboard I designed. Velco could also be attached…
This model was created to help align and drill the holes for a 12" speaker for a guitar cabinet project. The jig fits an 11" diameter hole for a 12" speaker. The jig has a small lip on the bottom that fits into the 11" speaker hole.…
The Salamander Designs extrusion appears to be inch-based, as the outer dimensions are 1" and 2". It looks similar to 80/20 10-Series as well. However, I found the t-track dimensions are larger than 80/20 10-Series. I'm not sure if their…
Allows for the stock TrippLite screws and brackets to mount to a 10 Series type aluminum extruded frame from Salamander Designs. With only the original parts, the bracket was too loose and would slide easily. This helps lock it down a…
This adapter plate mounts an Adafruit INA238 current sensor PCB to a DIN rail clip (shown below) so that the PCB can be mounted on DIN rail.
Used for test-fitting. Printed 100% infill, 3 perimeters. Not sure if this would last in real use on a machine. Using it as a mock-up test fit part on a 7x16 mini lathe.
Modeled this part of the included metal extrusion insert nuts included with the cabinet. Instead of tapped threads, I added a place to press in the nut that came with a TrippLite surge suppressor power strip that I wanted to mount on the…
Designed to fit over each end of the CyberPower Model 880 surge suppressor. Mounts with four #6 screws to a flat surface. Prints without support. Printed with 3 perimeters, 10% triangle infill, oriented with flat side on print bed. Modem…
Attaches to the pedal using the original enclosure's screws. Attaches the pedal to a board without needing to stick Velcro to the pedal itself. Includes Wampler logo and Metaverse text so it's easy to match it to the correct pedal. Text…
Measured the cover with calipers. Using the model to help plan some modifications for this lathe. The original part is made out of cast aluminum. This model represents Item #172 in the exploded assembly view from the manual. The native…
This is a model of the bracket that supports the 500W BLDC spindle motor on the rear of the Micro mark MicroLux 7x16 mini lathe. The real part is made from steel. This model may help design additional motor mounting options. Link:…
Adapter plate for Micro Mark MicroLux 7x16 mini lathe. This is the plate between the motor and the motor bracket. It is originally made out of steel. Model made by measuring actual part with calipers. Link:…
To wszystkie aktualnie dostępne wyniki.
