Liczymy pasujące modele…
Designed to bolt onto the k-edge mount for garmin's and wahoo elemnt. Inspired by the mount I found here: https://www.thingiverse.com/thing:2311307/files . But I re-designed it to be a bit stronger and to work a bit better with the…
A simple ball and socket mount for the modular mounting system. This one can be screwed down using the three screw tabs on the socket. I designed the threads on the socket and cap to be more printable. So the angle is only 30 degrees,…
For 22" wide toolbox drawers, specifically the larger drawers on the U.S. General Series 2 toolboxes. These dividers lay in with a 4x4 pattern, and fit snugly into the drawers. You can (just barely) fit two trays on a 256mm built plate.…
This is designed to be printed with a flexible filament (I used TPU). Its a strap for attaching gear to your mountain bike (or anything else). I played around with a few designs, and found that 2 "pins" held better than 1. on your MTB,…
Wall mount bracket for the Unimog Technik 8110 Kit and the Lego Land Rover Defender 42110 Kit. The defender hook is about 6 mm shorter, but you can use the longer Unimog hook for both if you don't mind the front wheels of the Defender…
The BMW model is decently heavy, so make sure you use some kind of drywall anchor if you're not able to screw the mount into a stud. The hook grabs onto the oilpan of the motor between the two lower black aero farings.
The original center cap that I made up had either inset or raised logos, but it was just a single color. A number of folks have remixed it into a two-part print so you could print the logo separate from the base and get two colors. I saw…
I designed these for the Syil X7, but suspect they will work for any 14mm t-slots
I needed a grit guard to get the grit off a wash-mitt. This one is designed to be 3d printed, using as little material as possible Category: Automotive
Mark the center line of objects easily and without measuring. This is particularly useful when marking center on small pieces of material for machining. The included F3D model is parametric so you can change the number of teeth on the…
Turn a hockey puck into a tesla jack pad with this stud. This is a remix of a very nice design: https://www.thingiverse.com/thing:3109796 I tried that design, and it works pretty well. Its designed for a rigid filament though, like PLA or…
A bin to store your endmill boxes. The included Fusion file is parametric so you can control the number of rows and columns. There is also 50mm spaced mounting holes in the back, designed for M3 threaded inserts. I used them to mount some…
Use two drywall anchors per hook. Two hooks total for the model.
Customized version of https://www.thingiverse.com/thing:45117 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=45117 Instructions Using the following options: Knob_Type = 3 Thread_Size = 5 Knob_Fill = 3…
The Mercedes-Benz Arocs is fairly heavy, so this model is designed to use dry wall anchors for adequate support. The mount grabs onto the frame just below the edge of the dump-bed.
I don't like traditional top tube bags, because they are a bit too bulky for my tastes. This one is printed with TPU filament, using 0.8mm wall thicknesses. The bag itself is really just a simple "box", which is printed totally sealed up.…
Designed to help me keep track of which tools I have in the machines at the Toolpath shop. You can use just the tag if you like, or the tag with rubber bands. I made a TPU strap to be a little more coolant resistant. I suggest printing in…
On my bike, the part of the downtube where the water bottle holder and pump bracket bolt to is wide and flat. It doesn't have any curvature at all. The bracket that came with my mini pump assumes some curvature, and didn't offset the pump…
The Banana for Scale model used by Toolpath in our WebApp
If you're using the tape+glue method for workholding then burnishing the tape to surfaces. Experimenting with a few setups showed that a smaller pin gives higher pressure and a better result. I found that a ¼" diameter x ½" long pin…
Mount for the BL-Touch to the standard Railcore 2 y-carriage. Print solid in PETG or PLA. The model includes a print-in-place support for the captured nut blocks. You will have to drill them out after you print it. The support is 0.2mm…
This spool holder is a remix of a remix of a remix :) Its for the Railcore II printer. It requires a short length of M6x100 threaded rod and 4 M6x100 nuts. Use two nuts to secure the rod into the spool arm (alternatively you can thread in…
An LCD panel holder that sits on the top left makerslide tower for a hadron ord Category: 3D Printer Parts
To wszystkie aktualnie dostępne wyniki.
