Liczymy pasujące modele…
This is a very simple key cover, designed to fit over a standard round/Yale type of key. printed in tpu so that there is enough stretch for it to fit over the top of the key. to be printed standing up on the flat side with no supports
The key cap is 9mm high and the writing is 0.4mm allowing for a quick filament change :)
Bed spacers originally designed for the Creality CR6 to go between the bed and the carriage, but this will also fit most Creality printers from an ender to a cr10 and possibly a whole lot more brands of printer. Printed in TPU at 0.2mm…
These accessories are designed to fit the Workzone or Parkside Pegboards from Aldi and Lidl they may fit other pegboards which have the teardrop shape (see photos) The Pegs are 8.5mm diameter with a 4.5mm slot behind it to hold it in…
This is to hold 4 usb (maybe other small cables) 2 holes 3.2mm with a 5.2mm countersink which is 2mm deep to fit a 10mm wood screw, so it can be mounted on a wall or cabinet. Printed in TPU at .18mm layer and 50mm/s UPDATE: I've just…
The child is a big Dr Who fan and also a big reader so i created this Tardis bookmark for them. Printed in PETG for flexibility 0.2 layer height make sure “print thin walls” option is selected in your slicer to make sure the windows and…
This is a basic PCI slot cover for the PC case. These help stop the ingress of dust and dirt as well helping maintain proper airflow through the case.
A cool little keyring of Dr Who's Tardis. Is also small enough to make a set of large earrings. This one was printed in PETG as thats the only blue filament I had. Print at 0.2 layer. Select print thin walls to get the window detail to…
Custard Cream Cutter and Stamp Inspired by the Great British Bake Off, here it a cutter and stamp to make your very own custard creams. https://thegreatbritishbakeoff.co.uk/recipes/all/prue-leiths-custard-creams/ Material: PETG Layer…
Cable holder for the Qube 500 case. This will neatly sit up to 4 cables to keep them close by and tidy.
Created these as i didnt think i had the correct length of bolf when creating a case for my PI but im sure there are other applications for these. 3.5mm holes to allow an m3 bolt to pass through easily.
This is the TARDIS light switch cover. It will not take you across time and space but it will look awesome when you turn the lights on. Models The switch cover come in 2 versions 1 which is a whole piece and one with top and bottom pieces…
GoodMans Wireless XE Headphones (Hinge Fix) So you broke your headphones, in the words of the Hitch Hikers Guide to the Galaxy ‘Dont Panic’ This model will replace the entire top band to which the hinges are part of. Although they are…
I was in the middle of creating a set of accessories for my peg board and decided to make this for the board too. https://www.printables.com/model/523513-parksideworkzone-peg-board-accessories This is a print in place model where the ends…
A simple tamper thats easy to hold for pressing down your coffee grounds.
Another biscuit cutter for making NICE biscuits. Material: PETG Layer Height: 0.2mm Supports: None This is not dishwasher safe but will clean up well with warm soapy water and a small bristle brush.
Full set of initial keyrings. Printed in TPU at .2 layer height and a pause for colour change. full size print is an oval about 63mm by 50mm 50% scaled down size is about 31mm by 25mm key chains were bought from amazon and about 6p each…
A very cute Grogu holding doors open with the force.
A replacement wheel for a Henry vacuum Airo brush head. This is printed at 0.2mm layer height and in PLA. Orientate this model in your slicer at a 45 degree angle as shown in the photos and use supports. This will give better strength…
Another biscuit cutter and stamp inspired by the Great British Bake Off https://thegreatbritishbakeoff.co.uk/recipes/all/prue-leiths-bourbon-biscuits/ Material: PETG Layer Height: 0.2mm Supports: None This is not dishwasher safe but will…
A keycap for Klipper users Key is 9mm tall logo is .4mm total - .2mm for the grey layer then .2mm for the red layer
Pi4 Case ans Pi Cam 1.3 Case and mounts for the X-axis on the creality CR6. I have recently started using klipper on the CR6 and created this Pi4 case to mount on the side of the printer and also a mount fo the Pi Cam to attatch to the…
I was told I wouldn't be able to print the Childs “Will to Live” Challenge excepted 😂 This is what I made them much to their annoyance but also great love. So if you have a friend or relative that's maybe a bit down and needs a laugh,…
Phone holder designed to fit into the ashtray space. The backrest for the phone is printed seperatly and clips into the base. Space to fit a charging cable and wrap excess cable around to keep cable tidy. Rubber band required for arms to…
A 7mm thick hook 45mm heigh and 25mm wide. Designed essentially to hang a H&S sign on an existing chain, but may have other uses.
A cute tortoise design for a key cover designed to fit over a standard round/Yale type of key. printed in TPU so that there is enough stretch for it to fit over the top of the key. to be printed standing up on the flat side with no…
Print at 0.2mm layer height Uses me screws using the spacers/washers screw the sensor to the mount then place the diamond shap at the back of the mount through the hole on the hotend carriage and turn 90° so it's the right way up and then…
Lower your carbon foot print today, fit the Atmos converter. Sontaran Approved !!!!! Inspired by the Dr Who Atmos Episode BBC One - Doctor Who, Series 4, The Sontaran Stratagem Both STEP and STL files provided
Have you ever lost or broken a foot on you PC case to then have a wobbly case? Then this is for you. A very simple PC foot for a standard case. Printed at 0.2mm
A simple button with a cute tortoise design. Print settings 0.1mm layer height print thin walls
This is a great and quick print from RH Foto & 3D Design | Printables.com All I have done is adjust the thread tolerance in the step file and re uploaded
Printed inReal PETG 0.2 layer height, prints in about an hour. it has space to push in 2 round magnets 5mm wide bay 2.5mm deep.
The water bottles my family kept buying had one major design flaw, the button would keep breaking making them useless. Well 3D printing to the rescue! a new button quickly printable every time it breaks. My model will break over time like…
To wszystkie aktualnie dostępne wyniki.
