Liczymy pasujące modele…
This tool set helps you get a perfect finish on your silicone caulking. You'll find the following: straight profiles for corners (5, 7, 8, 10, 12, 14, 16 mm) rounded profiles for taps, fittings, or recessed joints (5 and 15mm) a tool to…
Compact pebble shaped traveling case for the Pixel Watch 2 charger, with cable winding feature and power adapter mount.
Date Description 18/09/2024 Updated models for gen 2 & 3. Slightly enlarged the ring and the cable groove for an easier fit. 03/01/2024 Fixed a mix-up in the files. I had not uploaded the right ones for the Pixel Watch 2. 02/01/2024…
This is version 2 of the tennis racket wall mount, made of 2 parts so that the mounting mechanism is hidden and there are no visible screws. It still holds 3 rackets but only uses 2 screws. Note: I wanted to make a nicer design with no…
Update (04/02/2024): I've added a base design that has a space for the score booklet, it is 7mm thicker than the original design. Simple print, 15% infill, no support. I'm holding it close with a rubber band when traveling. On the base…
I've designed this model sot it would fit both the original Pixel Watch 2 charger from Google, as well as 3rd party ones, some of which have a cable strain relief where the cable exits (and so, a wider diameter). Setup: The charging pad…
Updates since initial upload: Date Description 02/23/2023 Added a USB-A version, to fit 3rd party adapters. The USB-A version is ~2.3mm thicker, and has been tested for the GEEMEE charger. Thanks to Martin Th. for providing me with the…
Simple SKADIS peg board holder for a combination square. Printed at 0.2mm layers, 20% infill, no supports.
Updates since initial upload: Date Description 26/02/2025 The model wouldn't scale properly to meet some parametric changes. It's been updated and should scale fine now. 24/05/2023 I added reinforcement in the stand because under the load…
Wall mounted tennis racket holder, using 4 screws. It can hold 3 rackets. I've printed this part at 0.2mm layer with 15% infill, in both PLA & PETG. Both hold fine. I have designed a variant of this model , mounted with 2 hidden screws .
I wanted to design something slightly more compact and easier to use than my original travel case with integrated stand. In the end: it's slightly more compact there is a version of the stand in which you can insert a 1€ coin to add…
This is a collection of magnetic attachments for a hydration pack tube, to easily secure it on your backpack. I have a Osprey hydration reservoir that comes with a hose magnet kit , however, the part you put on the backpack is designed to…
Updates since initial upload: Date Description 10/3/2022 Thickened drawer shell by 0.2mm to try and strengthen the device (a friend of mine's box drawer broke after many months of daily use) Added some tolerance to the drawer's magnets…
This is a remix of my tennis racket wall mount v2, made of 2 parts so that the mounting mechanism is hidden and there are no visible screws. This version is designed to hold a single tennis racket. I printed at 0.2mm layer height, 15%…
May 22th 2023 update: widened the opening for the handle clip. This is a travel case for Rockwell safety razors 2C, 6C or 6S. It comes in 2 designs: a simple cover, and a version which can hold 3 extra blades. I printed it with no support…
Coat / helmet hanger clip for the Rubbermaid FastTrack system. Credits to @ dhulihan on Thingiverse for the Rubbermaid FastTrack clip design, leveraged for this coat hanger.
Updates since initial upload: Date Description 10/22/2022 Proto 3 files added. Proto 2 hinge tolerance was good, but the spring loaded hinge was pushing the pad out (the arm wasn't parallel to the base when folded). I added a little…
Simple print, 15% infill, no support. It has some small ‘clips’ to hold it closed, but better be safe using a rubber band when traveling. The easiest way to close it and have the top and bottom align properly is to lay the box on a table…
This is a folding stand I use for my Nintendo Switch when I travel, so I can set it and connect it to any TV (I have a power adapter that also replaces the dock). To assemble the hinges, use a piece of filament and melt the ends. You may…
Bike mount for UE MEGABOOM 3, using the Fabric Cageless mounting system. Yes, it is a speaker cage for a cageless mounting system. It allows for a quick and easy switch with other cageless accessories. Adjustable: You can easily adjust…
This is designed to work with the ABUS Granit X-Plus 54 Mini U-lock, and be mounted on the Boosted Rev electric scooter, which has a 38mm diameter tube. It may work with other similar sized locks, but I have not tested it with any other…
Simple 1 screw mount for Dyson attachments, designed to be mounted on a horizontal surface like under a shelf or on a ceiling. Works with both standard and powered attachments.
This is a shelf designed to hold a Google Wifi router. So that it has a place to live in places where you don't have any furniture to put it on (e.g. a corridor). It is installed between the wall and the socket plate thanks to the…
This is a grommet hub holder for a desk top. It fits 80mm / 3.15" grommets, and holds the following UGreen USB hub : Printed at 0.2mm layer height & 15% infill using PETG.
FastTrack planter holder (92mm inner diameter). I have not tested with heavy plants, but it works perfectly with IKEA's fake plants and small FÖRENLIG planters
Updates since initial upload: Date Description 12/15/2022 I modified the design so the USB-A to USB-C adapter would be held in place by the USB-C connector end. That way it's compatible with more adapter designs than just Google's.…
[10/18 edit: the parameters for the f3d file weren't working right. If the bar diameter is bigger than 6mm, you may want to reduce the wall thickness of the horizontal bar receptacle, as it is tied to the bar diameter] This is a repair…
I wanted a ladder to put in my room so I could use it for clothes, etc. and I found this great IKEA plant stand ( Satsumas ). Except, I didn't want to screw it into the wall, so instead, I designed and printed these wall rests. They are…
These are fixes for the plastic parts that hold the handle. It is compatible with the Frigidaire Gallery series model FMT148GPB1, I'm not sure about any other. I've also included a larger bottom part (our microwave door's whole corner was…
Update May 13th 2022: modified shelf hinge diameter to better slide on the poles, added drawing for wooden shelf dimension. Undecided between a floor lamp & a side table? You don't have to choose anymore, with this amazing tripod floor…
This design is for the Pixel Watch 4 No more messy tangled cable when traveling with your Pixel Watch! Easily unwind the cable when you need to charge, and wind it back to store it. This is specifically designed for the official Google…
I needed a custom sized cable management box for my needs, so I designed one, and made it parametric so anyone can make their own custom version too. For the sake of simplicity, I've also added a couple of different sizes. S = 20 cm x 10…
The power of magnets makes it easy to drink from your HydroPak when you need to, while easily and neatly tucking away the tube when you don't. This is a collection of magnetic attachments for a hydration pack tube, to easily secure it on…
This is a model I made of the Pixel Watch charger (gen 1). I have used it successfully as a reference in multiple projects ( here , here , and there ). I wanted to share the model so maybe it's easier for anyone to design around it.
I've made this simple laptop stand for better ergonomics when I'm not at my desk. It can hold a macbook pro up to 16 inch. The back of it is roughly 23 cm high (and the laptop would stick out a bit from there) Assembly is a tight fit + 4x…
To wszystkie aktualnie dostępne wyniki.
![Pedal bin mechanism hinge repair [parametric]](https://media.printables.com/media/prints/297735/images/2607349_6e32c038-5774-4ffe-929f-477c49d997ee/pxl_20221017_234301493.jpg)
