Liczymy pasujące modele…
After you have generated the g-code, delete the entire header block. Otherwise, the g-code won't work! The Ultimaker S-line firmware will check the firmware version and say that G-code file cannot be printed because it contains an…
original page: https://www.thingiverse.com/thing:5224200 I made this remix because the original keycaps didn't fit onto my Kailh Box switches. I can recommend using PLA, since that worked for me very well. I've also tried PETG, it works,…
I converted the .pwmb file to an .stl file to be able to print it on FDM as well
update 14/05/2025: As some people had issues with the previous file, I did some tests again and made new preset files. update 30/01/2025: As per a request I got, I added a print profile for an UltiMaker 2+ with a 0.6mm nozzle installed
The reason why I did this is because normally if you add the Ultimaker 2 Extended + to Ultimaker Cura, it won't let you adjust the settings for retraction that are most important (retraction speed and retraction distance). Normally when…
I made this remix of the butterfly comb because I heard that a comb with wider teeth and the teeth further from eachother was better for your hair.
⚠This is not my design, and I haven't tried making it yet myself.⚠ I just made a clearer overview of the model here in Printables. original creator's Thingiverse: https://www.thingiverse.com/liyue_cheng/designs assembly video:…
Hi everyone. In this version 2 I made the wings stronger and increased the size of the model to a 75 mm scale so it would be easier to print. as well as the supports should be easier to remove.
downscaled version of the Pulsar X2V2
inspiration: https://www.printables.com/model/787810-volvo-prancing-moose-wheel-hub-center-cap https://cults3d.com/en/3d-model/art/porsche-keychain-rpeti240 https://www.printables.com/model/321054-volvo-keychain
This is a remix of a remix of the 3-speed cover so it fits on my sparta amazone. I made the gap where the cable should go through wider so it fits the 7 speed shifter of my Sparta Amazone better
“If you have medium to large hands, and (an) aggressive claw grip this (XM2) is definitely a consideration (and)'ll probably fit your hands much better than the OP1. I would still like to see just an OP1 Large, but with Endgame Gear…
version 2: https://www.printables.com/model/457662-archangel-elspeth-v2/files I have yet to print this. So I'm not sure if it will turn out okay ↳ I printed this and came to the conclusion that the model was too small to be strong enough…
Edit (2 December 2024): I added a new version of the model, for which I used the size ratio between the Viper and the Viper mini. Which turns out to be a little bit larger than the first one because it was really tiny actually. So now it…
changed the base since the termite hill base didn't work very well when I printed it. And of course, changed the wings.
coloured version
here is the cooling platform that I use and that I designed this for https://www.amazon.com/dp/B01B34928M/ref=twister_B071S921S2?_encoding=UTF8&psc=1
a heavily altered version of Wrist rest v4 w/ fillets by CarterArris - Thingiverse , (alternate link: https://www.thingiverse.com/thing:4808839 ) which was loosely based on the 𝘿𝙚𝙡𝙩𝙖𝙃𝙪𝙗 𝘾𝙖𝙧𝙥𝙞𝙤. I modelled it so that it fitted my needs for…
I modified the model to fit the 6x6 neodymium magnets I had lying around from another project
if you want to add a logo or something, you can use any CAD program. the easiest is probably TinkerCAD but if you have any local CAD programs (Fusion360, AutoCAD, SolidWorks, Rhinoceros3D) those will probably give you a better result. I…
I modelled this using SolidWorks for the printers at my work
remixed it to make it a bit taller since it didn't fit on my Anycubic i3 Mega
this is version 1. I might update. the original was about 10mm too far to the right and I changed the way of attachment.
somehow the original part that holds the tension of the extruder module of the UltiMaker broke off at the indicator pin. This pin is there for another reason: to hold the nut in place so it doesn't pivot. I designed a replacement part…
I also used this model for the mounting bracket: https://www.thingiverse.com/thing:2850837 printed in too wet ABS, with still some red PLA in the nozzle lol. as long as it's functional! and I'll experience that very soon :)
remix of PET bottle storage for IKEA Billy
designed to be used on a MAKYU Multiplier (pressure former)
using this fan bracket: https://www.thingiverse.com/thing:2850837
changed the model so my 6x6 magnets fit
I made this remix really quick to fit it on a HSS (Humbucker, Singlecoil, Singlecoil) classic Fender stratocaster (or Squier).
I would also add the nTop file to have parametric modelling possible, but that's not allowed to upload here. The base plate is this one: https://makerworld.com/en/models/2459463-gridfinity-ikea-galant-top-drawer#profileId-2700410 courtesy…
update 20/07/2025: added the internals for the pre-fan filter part. updated the photos a bit as well. update 23/12/2024: added the intake and exhaust covers. (for the intake one you can just take the original model. and for the exhaust…
this is designed to be glued to the back of these mana symbol hexagons, so you can also use them as coins
also used this as a base for the mounting bracket: https://www.thingiverse.com/thing:2850837
Created using Fusion360, nTop and TinkerCAD.
a calibration cube with a z on the bottom as well
printed with my Anycubic i3 Mega in 3Djake yellow ecoPLA, with a 0.12mm layer height. PETG might be better because there is a clip mechanism on the inside and mine broke already. but it still works
this part is designed so that it can be inserted in the cavity of the metal fan shroud, using the original screws. It's for when one (or both) of the metal flaps are broken off due to metal fatigue and you don't want to replace the entire…
for assembly I use a 60mm ring LED light and a simple LED strip. as well as seven 30mm long M3 bolts and M3 nuts.
this is a template I made to build your own fan duct for part cooling
Scanned with Revopoint Miraco Pro
changed the inside so it fits my double edged razor holder better
this sits nicely on top of the LaCie Rugged harddrive
Created with Toolshape, SolidWorks, nTop and TinkerCAD. Inspired by https://thangs.com/designer/sudobinbash/3d-model/Gridfinity%2520tray%2520-%2520swiss%2520army%2520knife%2520victorinox%2520classic%2520sd-1004720
these are the 3D models I made and 3D printed for our University project. The project is called Project Smart Products and it is part of the Bachelor Industrial Design Engineering program at the University of Twente. The goal was to…
this fence has been used in our family when me and my brother were babies. then later for our puppy, but she is grown up as well now. so now it is a fence to keep our ducks out of the vegetables garden. That's why the pictures shown are…
inspired by the cardboard wrappers from Samsung T7
simple keychain with the text FabLab on it. I also added a zipfile, which you can use to print it in two colors, to be printed on your Prusa XL, UltiMaker 3, UltiMaker S5, BambuLab X1 Carbon or BambuLab X1 Enterprise.
I liked the key layout of the Voyager by SZA but I wanted to have a portable keybaord so I changed it to the size of the crkbd (Corne Keyboard) 3x5
I reverse engineered the model below, using the dimensions to get a fitting part. But I added a print-in-place hinge that can be screwed to the original glass door. Mirror for top side.
made this in 1 minute with TinkerCAD
Added fin-supports.
Meant to replace the tiny, finicky hooks that come with the IKEA SYRLIG curtain rings.
Made this using SolidWorks. Inspired by someone else's design (maybe it was Capra Audio, but I'm not sure), who made a PET-G printable headphone stress-relief band.
To wszystkie aktualnie dostępne wyniki.
![[Repost] Assassin's Creed: Unity "Phantom Blade"](https://media.printables.com/media/prints/2e2d9fe4-4893-4c4b-bd29-add971ea9b24/images/10225232_36bee81a-302c-4310-8561-09fb05e5ecaf_383f2f63-de54-46aa-88ce-ec5ffc93dcd4/fade169bb9865a1e9dcf29bd14abd057.jpg)
![[theorysculpt] Razer Deathadder V3 Mini & Micro](https://media.printables.com/media/prints/1092860/images/8276660_28464a35-9196-4763-8ec0-45072e8e6936_eeef7596-ec83-4f53-9e96-24579a96de51/img20241202133300.jpg)
