Liczymy pasujące modele…
This is a remix of the Balance Tetris box to fit the Ender 3 build plate as well as to enable multi-colour with inserts of the letters and the bottom of the holes for the pieces. This model uses less material while able to fit the same…
Remix of the original optimised for minimal (or no( support (i.e. for FDM printing). The base which gets screwed to the mount is 2mm thick that is thicker than the original so the Z offset will need to be adjusted (increased) after…
This model will hold a large sized cellphone horizontally on top of a PM5 performance monitor similarly to the official PM5 phone holder (https://shop-uk.concept2.com/parts/353-smartphone-cradle-for-pm3-pm4-and-pm5.html). I like this type…
This is a remix of the SBox for MK2/3/4 - Double cantilever box to fit the Ender 3 build plate (235x235) as the original does not fit (247x247). Basically I shaved off 2-2mm from the bottom part next to the handle as well as from the…
These are models for the RainBird 3500 rotor irrigation's nozzles. Unfortunately RainBird does not sell the nozzles for this specific model on a standalone basis. So if its lost then a full new rotor is required. In order to overcome this…
A case for the Wemos D1 Mini ESP32 dev board. Note this is not the same as the Wemos D1 mini that is for ESP8266. Its print in place, apart from the cable strain relief (which I recommend printing from TPU) and a push button. It has a…
A holder for watches that can be taped to the boat instead of using the suckers (I never trusted those), though it is compatible with them same as the original. The base fixture needs to be printed from some kind of tpu (as it needs to…
This is a project box for the Firebeetle 2 ESP32-E with a reset button and hole for the USB-C charger. Its main purpose is to host the MCU for ESP Rowing Monitor (https://github.com/Abasz/ESPRowingMonitor) Printing should be pretty easy,…
A case for the Wemos Lolin S3 dev board. Its print in place, apart from the cable strain relief (which I recommend printing from TPU) and a push button. It has a hole for a 5mm magnet (for securing it metal surfaces) and a version that…
This is a rugged case for the PTS200 soldering iron. It is designed so it fits a build plate that has at least 210mm in one direction (e.g. Ender 3 and their variants) no resizing is necessary. Also it provides inserts that can include…
This is a holder bracket for 3x3mm neodymium magnets (up to 6) that used with the [ESP Rowing Monitor project](https://github.com/Abasz/ESPRowingMonitor) to upgrade my generic air rower (actually a cheap Concept2 clone) with more accurate…
This is a remix of the 6mm Reversible Ratcheting Screwdriver shaft so it hold the bits better as well as lock the bit with a click The locking is achieved by a bump at the height where the standard 6mm bits have a groove. I printed it in…
This is an adaptor for food dehydrator to allow it to dry filament while printing. It is compatible with https://www.printables.com/model/351745-dehydrator-to-filament-dryer-conversion-for-sencor so it is possible to have a filament…
This is a break that can be screwed to the Z Axis stepper motor so it stops the snagging of the gantry upon power off/power loss. The issue I had with Ender 3 is that when the stepper motors are disabled the gantry drops with a few…
This is a remix of the original shower head mode. I uploaded the fusion 360 archive file and the stl. rest is self explanatory.
This model is to provide a good looking functional case for the Waveshare ESP32-S3-Zero board to be operated by AA batteries. While this was specifically developed for the [ESP Rowing Monitor](https://github.com/Abasz/ESPRowingMonitor)…
To wszystkie aktualnie dostępne wyniki.
