Liczymy pasujące modele…
A transport container for the new Kill Team 2024 tokens with a magnetic lid. The lid can be used as a mini tray i.e. to store used tokens. Use four 6x2 mm magnets Add filament change after two layers to make the text in the lid well…
A mechanical wound tracker / counter printable with 0.4 nozzle. It maxes out at 49 but is small enough, to have it on the battlefield near your operatives. Only one M3 x 8 screw is required for assembly. Some grease is recommended but not…
Miniature War- and Skirmish gaming Objective Marker for 40 mm Markers with a 1, 2 and 3 inch distance display. Printed with only two layers makes it strong and flexible. There is also a Miniature War- and Skirmish gaming Control Range…
A small transport container for the new Kill Team 2024 tokens with a magnetic lid. The lid can be used as a mini tray i.e. to store used tokens. Use four 6x2 mm magnets Add filament change after two layers to make the text in the lid well…
These are walls and ceilings compatible with the Into the Dark terrain for Kill Team 2022 by Games Workshop. They are not a replacement for the existing ones (no model has a door i.e.), but to expand existing terrain, have windows (on the…
A 5x3 gridfinity storage for Bosch GWS 12V.
A convenient storage solution for your Kill Team card deck and the tokens for it. Stackable to optimize space usage during play. Use 4 5 x 1.7 mm magnets. Edit 03.08.2026: Added alternative model with magnets between the token and card…
This storage case doubles as a stand for a Waveshare 7inch Capacitive Touch Screen LCD . 4x M3 x 8 mm socket caps screws for the main case 6x M3 x 8 mm socket caps screws for the hinges 6x M3 nuts also for the hinges The 12 optional…
I designed this to rescue quadcopters / multicopters from trees. You will have to make it heavier somehow so that it flies better. The V2 (green in the pictures) has holes in the front where M5 screws and nuts can be used to make it more…
Use m3 x 12 mm screws and nuts to mount the trackers. The designs are for the following saddles: Ergon Large (4 screws) Selle Royal Ariel (2 screws) Edit 8.6.2026: Upload new Selle Royal Ariel version, since the last might be too snug for…
After many, many years of service, the rubber knob broke on my G13. This is a replacement which I printed in TPU with supports on build plate.
Horizontally standing, stackable color dropper bottle rack for 14 (two rows of seven) Vallejo, Army Painter, … colors, primers, washes… It is designed to use space as efficient as possible, so that we can get more paints. 😉 The shroud was…
Magnetized tops for Redgrass painting handle with groves for 32, 28 and 25 mm bases. Requires 8x3mm magnets. Please be aware that the 28 mm bases are not held in grooves. There are also storage plates available to manage your minis during…
Miniature War- and Skirmish gaming Control Range Marker for 40 mm Markers with a one inch distance display. Printed with only two layers makes it strong and flexible. There is also a Miniature War- and Skirmish gaming 2024 Objective…
This is a stand for the lids for IKEA Pruta food container set with 17 pieces.
This is a simple stand for up to two Tamiya square bottles like the extra thin cement or panel liner. After spilling my bottle twice and ruining the pretty grid on my cutting mat, I designed this. 😅
A 1x6 gridfinity storage for Proxxon Micromot 60E Edit 2024-08-06: Uploaded correct version of the .3mf file
A cap for the Harder and Steenbeck Evolution and Infinity airbrush to protect the nozzle and needle. It fits very snug. If you are looking for more organized Airbrush storage, check out my Airbrush Storage system . Check out my other…
This simpel mount allows you to mount the Tobiii eye tracker to a 1000r screen.
Box insert for 2021 HeroQuest Mage of the Mirror expansion. This is meant to be used along side HeroQuest 2021 and Frozen Horror box inserts by Atree so that the Base game, The Frozen Horror and Mage of the Mirror expansion fits into one…
A 1x3 gridfinity storage for two Bosch 12V batteries.
A storage for the Harder and Steenbeck Ultra airbrush. You need 8x 6 x 2 mm magnets This is part of my magnetically stacking “Airbrush Storage” system. Check out more parts for this system and my other airbrush models here on printables .…
DIY JR Module Arduino and nrf24l01 for RC Taranis X9D. This remix was done, because the nrf24l01 format probably changed and mine did not fit. Category: R/C Vehicles
This is a very simple mini trashcan for the workshop. Its diameter is 11 cm and the height is 15 cm. To speed up the print and make it as simple as possible, it is a vase mode print.
Vertically standing color dropper bottle rack for 46 Vallejo, Army Painter, … colors, primers, washes and so on. My aim was to store the colors as efficient as possible so that they use as low storage space as possible. The total height…
A storage for the Harder and Steenbeck Evolution airbrush. You need 8x 6 x 2 mm magnets which will be included in the print. You will have to add printing pauses to add them! This is part of my magnetically stacking “Airbrush Storage”…
A gate to the stars with base and optional LED effects. If you build two and flash them as primary and secondary the gates can dial each other. 🤓 You should mirror the gate ring for the "back side" so that the symbols line up when you put…
A storage for the Harder and Steenbeck Infinity 2024 airbrush. You need 8x 6 x 2 mm magnets which will be included in the print. You will have to add printing pauses to add them! This is part of my magnetically stacking “Airbrush Storage”…
I build the same desk lamp as Adam Savage build in the following videos. But I was not able to acquire the mounting mechanism with which he mounted the lamps, so I designed my own. This can easily be modified to be used for other objects…
This is a case for the brilliant online GameBoy link cable by stacksmashing . To assemble the case, you need to glue the lid. There might be a friction fit version in the future, but I am not promising anything. Four drops of superglue…
This medal hanger clamps the band of a medal so that they can be presented nicely. It is designed for medals from the conqueror and the presented pictures are from the LoTR challenges. The LoTR pictures are from amazon . You need m3…
This belt hanger is designed for Shotokan Karate Kyu belts. Please be aware that different organisations or even dojos have different belt colors for different kyus.
A stackable 5x2 gridfinity storage for 3 inch sanding pads
A simple helper to center the magnet in your bases. Designed for a 6x2 mm magnet. Edit Jan 2024: Added 28 mm base
Add a color change at the appropriate height to make the numbers more visible. Glue some washers or similar into the center to let the magnetized minis grab on. The numbers are meant to be placed on corresponding character sheets. The…
This brush stand holds 38 brushes with < 9 mm diameter and 5 < 18 mm diameter. In the front corners, there is space for two very small brushes behind the stands. Print one of the top and bottom and 4 of the spacer. Then use superglue to…
Simple zip tie cable mount to use with double sided tape or power strips to fixate cables.
This is only a stand for a Nintendo Gamecube with enough space for the power brick and good cooling. I printed this in PET-G, so that the temperature of the power brick is no problem.
5x2 Gridfinity storage for Bosch GSR 12V. Please be aware that the hex cutouts for the bits are too small in the current model version! Since I don't use this feature myself, I don't really care. Ask if you want to use this and I might…
A mount to hang the original Raspberry Pi 5 case on a vertical surface. The mounting surface ist just flat since I will mount it using double sided tape.
This simple stand for Micro Sol and Micro Set helps you to not spill the small bottles and the caps for them.
A magnetized storage bin for airbrush bottles (primer, cleaner, ...). You have to print this two times and then stack and glue and ideally screw it together. You need: 8x 6 x 2 mm magnets 4x M3 x 6 mm (or longer) screws 4x M3 nuts This is…
Very simple 1", 2", 3" and 6" ruler for Miniature War- and Skirmish gaming. Printed with a filament change at 1.6 mm height. This item is part for my “Gaming aids caddy” system: Gaming aids caddy Gaming aids mini caddy (without the…
Two floor mini storage for the Smartstore.se 34x25x16 cm storage boxes. The lower floor is about 63 mm in height and the top one 60 mm. Those boxes are sold by Jumbo and Coop in Switzerland. You need: 8x 10 - 40 mm long M3 screws with…
Harder & Steenbeck nozzle and air head case for 0.15 mm to at least 0.4 mm diameter. Ignore the “Evolution” in the filenames, since all Harder & Steenbeck airbrushes use the same heads and nozzles, you can use this case for any of them.…
Store eight minis during painting based on my magnetic tops for the Redgrass painting handle . There is also a rack to combine 3 of the bases for easy transport. Glue 5x2 mm magnets at the top of every stem to harness the power of magnets…
This is an organizer for the retail version of Darktide (the board game, not the PC-Game :D). You can use magnetized minis if you use washers. The hole for the washers is 18.2 mm in size. There is one free space for an additional mini and…
A magnetized storage bin for airbrush tools. This bin has a total height of 28 mm and the inner height is 26.8 mm. My Harder & Steenbeck nozzle and air head case fits perfectly inside it. You need 8x 6 x 2 mm magnets This is part of my…
You can find the storage trays in my Airbrush Collection . Attention: The footprint of the storage system is slightly (0.4 mm) longer than the gridfinity grid! The storage system is (because of the protruding text) 168.4 mm long and the…
A magnetized storage bin for random airbrush stuff. This bin has a total height of 21.2 mm and the inner height is 20 mm. You need 8x 6 x 2 mm magnets. This is part of my magnetically stacking “Airbrush Storage” system. Check out more…
Just another XT60 male cap Category: R/C Vehicles
A minimal case for a Raspberry Pi Pico with 3 buttons. This case is designed for this my circuit-pico-keyboard project. A minimal keyboard to choose OS from grub boot manager when no keyboard is connected.
This is one of several lamp shades I designed . All of them use the same mounting mechanism. This shade is for a big LED ball bulb and I printed the top layers in transparent filament, so that more light shines on the ceiling. Please be…
Magnetized tops for Redgrass painting handle with groves for 40 mm bases. Requires 8x3mm magnets. There are also storage plates available to manage your minis during paining. The rack for those plates are also working, just stacking…
PI 4 case for outdoor use. Not designed to be mounted in the rain, but designed that water should not run into the case. Works for me since several years without a “water accident” for my flightaware receiver. Designed to not use supports…
A not stackable 5x2 gridfinity storage for 3 inch sanding pads
This object ist for the usage of LM35 on most LiPo chargers to protect against overheating. It can be mounted with a rubber band or velcro/battery strap. Just use CA-Glue for the LM35 itself, and something like hot-glue for the cables.…
Store 24 minis during painting based on my magnetic tops for the Redgrass painting handle and the storage plates . Use 6x2 mm magnets if you want to suppress the storage plates of falling off too easy. 2025 Edit: There is now also a 40,…
This is a box for the Goblin Hobbies Stampin Kit. When using the lid, all items have minimal space to move so that you can put it in a backpack for transport. Since the lis is pretty tight, you have to pay attention when putting the lid…
I designed this object because I had problems with the props hitting the ground at takeoff, since a under sling battery. The object also might help to reduce some vibrations. It will lift the end of your quad arms by 12mm, which is 2mm…
EMAX Nighthawk 250 Fatshark 600TVL FPV camera mount Category: R/C Vehicles
You have to cut and engrave the glass by yourself. I used 1.2 mm photo glass for this. To secure the lid, you need 4x M3 screws. The wall mount variant is very customized for the wall in the picture, but you could also just screw trough…
This is one of several lamp shades I designed . All of them use the same mounting mechanism. This shade is for a “normal” LED bulb and I printed the top layers in transparent filament, so that more light shines on the ceiling. It blocks…
A 5x2 gridfinity storage for IT Dusters AirGo V8
A very simple lens protector for the Optiplex. Use cut up cotton pads to protect the lenses from scratches.
With this adapter, you can use 2x 1S batteries on the XT30 version of the BetaFPV 75X 2S Whoop. HV LIPOs here we come. ;) Should be printed in TPU to not damage battery and quad! My german YouTube video featuring this design:
A small transport case for the GepRC Smart 16 micro freestyle FPV quad. It also can store some batteries, four sets of two of the “original” ones. It should work either if you added the top or bottom battery mount. But since I use mine on…
Magnetized tops for Redgrass painting handle with grooves for 50 mm bases. Requires 8x3mm magnets. There are also storage plates available to manage your minis during paining. Attention: Since the 50 mm bases are too big, the rack for…
This is a box for a relay to remotely switch the printer on or off via i.e. Octoprint . The status of the LEDs show trough, if you print the lowest two layers on the lid in a transparent material. To mount this box to the printer, I use…
Modular 45x 17 mm WS2812B LED segments i.e. for WLED . The bases are designed with 45° steps stands to be able to light your object how ever you need it. It is designed to be printed with minimal filament which leads to a not so sturdy…
A simple octagon candle holder with a inner diameter of 71 mm.
If you slice the model yourself, you have to add a pause at 3.8 mm height for the button cover, to insert the 3 M3 nuts. To build it, you need: 3x M3 nut 3x M3x10 Screw 3x Button (6x6 mm) 1x 5 mm LED Wires, heatshrink and plugs Since I…
Two very simple test prints which I designed to test the color changes on the INDX.
Use 6x2 mm magnets to keep the lid closed. This item is part for my “Gaming aids caddy” system: Gaming aids caddy Gaming aids mini caddy (without the rulers) Simple Ruler Magnetic base tags for 25, 28, 32 and 40 mm round bases Small…
There is not much to say about it except: Print in TPU Print in vase mode Almost indestructible. 😊
This is a box with well ventilated lid for 120 x 80 mm breadboards. One version has a XT60 cutout for power. It uses M3 screws to secure the breadboard. Also it has some cutouts to feed cables out.
This Object lets you mount the TBS Unify antenna (and your RX antennas) on your Lumenier QAV-Skitzo Dark Matter. Printed in TPU (NinjaFlex) for maximum durability and also to protect the antenna on impact due to the flexibility. Other…
This Object lets you cover the arms of the QAV-Skitzo for additional protection. If there is the interest, I could also add a motor shroud to protect the motors also if required. The v3 is doubling as a arm bumper and motor soft mount.…
This is a FPV Camera Mount for the RunCam Swift 2 on a G-Rilla Mini Race Wing. It allows you to change the camera without disassembling the complete canape. The mount is shown in this german build video:…
This print can be used to force the correct orientation of PWM plugs on a breadboard. I used this to power some 12V pc case fans from a 5V USB adapter to “silently” cool my rack.
This is one of several lamp shades I designed . All of them use the same mounting mechanism. This shade is for a “normal” LED bulb and I printed the top layers as well as the cap in transparent filament, so that more light shines on the…
EMAX Nighthawk 250 XT60 mount Category: R/C Vehicles
This is a simple case for the rasp plugin external module of my home automation solution called JamesII . This module includes: 1 Button 3 LEDs Infrared Reciever Please see the JamesII readme for more information. The picture is the MMU…
A simple ruler to be placed at the border of your gaming area. Easy to check deployment zones and stuff like that. The V3 version has a additional flap to be placed under i.e. the cardboard board. V2 is the same as V3, except without the…
This object is for protecting the GoPro Session when using my other mounts for quadcopters. I printed this in semi-flex and it is almost indestructible. ;) Category: R/C Vehicles
This Object lets you mount a FrSky XSR and a buzzer on the Lumenier QAV-Skitzo Dark Matter. Printed in TPU (NinjaFlex) for maximum durability and also to be able to fixate the buzzer (press fitting). Other things for the Lumenier…
Very simple EMAX Nighthawk 250 landing gear with more distance to the ground for landing in grass. Category: R/C Vehicles
Just a really simple seat to mount a Foxeer cam more easily in to the Reptile s800 sky shadow. Category: R/C Vehicles
This Object lets you cover one side of a GoPro Session 5 (and probably 4) for protection. If you use two, you could protect all sides at once. This was designed to be used to protect the GoPro on my Quadcopter in combination with:…
This is a 30° GoPro Session mount for Martian II (Alien Clone) quadcopters. I additionally use the cam-ring from https://www.thingiverse.com/thing:2060314 To protect your camera, you can use the following thing:…
A simple bench for quadcopters of different sizes. The tables can be turned to make work easier. Category: R/C Vehicles
EMAX Nighthawk 250 RunCam Sky+ mount Category: R/C Vehicles
EMAX Nighthawk 250 Fatshark 600TVL FPV camera mount Category: R/C Vehicles
This design leaves the bottom of the scope as well as some millimeters at the top open, so that airflow can help cool it.
This Object lets you mount a GoPro Session 5 (and probably 4) on the Lumenier QAV-Skitzo Dark Matter with an angle of 20°, 25° and 30° degrees. Printed in TPU (NinjaFlex) for maximum durability and also reducing vibrations in the recorded…
This fan shroud is for object cooling. Category: 3D Printer Parts
Rcexplorer Tricopter V4 TBS Unify Antenna mount Category: R/C Vehicles
These brackets where used to mount the Quanum Axis Gimbal Upgrade (HALL effect sensor upgrade) into my Taranis. https://www.hobbyking.com/en_us/quanum-single-stick-3-axis-gimbal-upgrade-for-turnigy-9xr-9xrpro-tx-s.html Category: R/C…
Immersion Duo 5800V4 case to mount it on a camera stand or directly to a pole. Category: R/C Vehicles
The box is used to fix the CG on the G-Rilla Mini Race Wing. I used about 60g of fishing weights which where glued in place and finally coated with PlastiDip. This Object was used for the following (German) build video:…
