Liczymy pasujące modele…
Attention: Please measure the width of the frame (see picture). The width must be approx. 40mm. Apparently there are deviations in the width of some printers either due to changes or quality problems at Creality! If the width is correct…
separable hinge (lift-off) with 4 cm height, hole diameter 3.5mm UPDATE: V2 - build from scratch. Made them narrower, more tolerance, beveled corners Thanks to PBer for the original file - great, sturdy hinge 👍
Ender 3 v3 KE/SE spool roller (made this some years ago for Geeetech A10 spool holder) - the upside down mount from the pictures can be found here -…
The original creality Y bracket can only be used if no mods are mounted on the printer so that's why I changed the position to be able to use a nebula mount, my side bin or a repositioned pad (Attention, may not fit with other/wider side…
UPDATE 1: Pin improved for V1 - Try Pin V1. 2 FIXED if the nebula pad is to loose with Base V1 UPDATE 2: I built a new holder from scratch (Display Base V2 + Pin V2). In V2 I fixed the problems that were present with V1 such as the wrong…
mixed the quick release (thanks DerrickDarrell) with my front Y bracket Update: New version added - bracket moved to the left about 13mm to give more room to be able to use it with wider bins than mine. See picture from spitfire in makes.…
Mama Aufsteller mit Herzen. Die Dateien sind gespiegelt, um eine schönere Oberfläche aus der Vorderseite zu erhalten - Auf diese weiße müssen Stützen verwendet werden. Wer bedenken wegen seiner Stützen hat, der kann die Dateien auch auf…
added cable clip + nebula mount **for those who already printed the original without cam mount - here is a addon mount ;-) → https://www.printables.com/model/823979-addon-mount-for-nebula-cam excerpt from the original post: … recommended…
english Joint case with screw lid / lid to use as a keychain - Easy to print, no support needed *added empty ring and simple stand (+ hemp stand https://www.printables.com/model/831439-hemp-stand-for-joint-case ) Recommended print…
Attention: Please measure the width of the frame (see picture). The width must be approx. 40mm. Apparently there are deviations in the width of some printers either due to changes or quality problems at Creality! If the width is correct…
sticks for low stress Training. easy to print with rounded edges to minimize injuries to your ladies different lengths and thicknesses ---------------------------------- Sticks für Low Stress Training. Leicht zu drucken und mit…
english easy to print you can scale it to every size you want. the pictures show the vase with a scaling of 100% and 75% recommended print setting: print speed: 120 layer hight: 0.32 walls: 3+ top/bottom layer: 4/6 infill: >5% for fuzzy…
Kirby Planter/Decor Bowl planter/decor pot - kirby on a star Several parts included: -The planter that consists of one part. - 3 different pots - Pot version 1 and version 2 almost identical. V2 is suitable for less precise printers due…
Shark Spartan - Chin Mount Cam (Chin Mount work in progress) >25% infill i used PLA and it seems to be durable enough but fell free to use any filament you want. please use a safety leash for your cam just in case - i use RT1.5-250…
Monitor headphone hanger right To use it on the left side, just mirror the file 2 versions long/short I use double-sided adhesive tape to attach them ----- Monitor Kopfhörer Halter rechts Um es auf der linken Seite zu verwenden, die Datei…
Camera mount for LS2 Challenger C GT Carbon Size S/M Update: There was a weak spot at the front most element of the mount. Updated file uploaded. Sorry it bothered me with conventional cam arms that the camera has almost always filmed…
Standalone stand for nebula pad. IDC 10 pin 2,54mm male/female extension cable do work to extend the Nebula cable → https://www.ebay.com/itm/272617069892?var=571737481000 Alternative - the Nebula Pad cable is attached to the mainboard on…
added face, removed some holes i made a completely new “kirby with a knife” - https://www.printables.com/de/model/641394-kirby-with-a-knife-v2
Attention: Please measure the width of the frame (see picture). The width must be approx. 40mm. Apparently there are deviations in the width of some printers either due to changes or quality problems at Creality! If the width is correct…
V2 uploaded - closed the hole on the back of the center partition. please let me know if there are any further issues ---- Desktop Organizer mit Smartphone Ständer Hinteres Fach, die SD-Karten und USB Stick Fächer sowie den separaten…
Rubber feet/riser for Ender 3 v3 KE/SE Printed with Extrudr Flex Semisoft A85 with 2 walls, 3 top/bottom layer, 60mms, 10% infill (please use your own settings for your TPU filament) 2 versions: Raises the printer by 10 or 15 mm. Shown on…
i like the original design but i added a bigger hole so the charger gets less hot when charging
25mm height to fit 200-250g spool thanks to @gdrag for your Silica gel spool container 50mm
Wide, save stand for 60mm Co2 bottle (e.g. SodaStream) for aquarium Co2 systems Opening diameter: 61mm, stand diameter: 120mm, height:100mm *if you have a smaller Co2 system, you can scale it down to 80mm Easy to print and with a fast…
For those who have printed a side bin without a camera mount but would like to use a camera without having to reprint everything. Can be used left or right. Simply drill holes and screw on. You can use heat inserts, but it is also…
deutsch *letzte updates: Kette V4 - gedreht, weiter zur Mitte der Base Berg V2 - final Topf groß V2 - tiefer Zen “schwebender Topf” leicht zu drucken. Die Kette muss mit Supports und einem stabilen Filament (festes PLA, ABS oder…
Kirby sitting on a star. See also my planter version https://www.printables.com/de/model/749909-kirby-planterdecor-bowl
Ring for 55mm cardboard spool (cardboard thickness up to 4.1mm) - fit for creality Hyper PLA, Polymaker PolyTerra and many more inner diameter of the spool ring 51.7mm so most of silica gel spool container still fit (like…
just a bunny hanging on a pot 3 different planter designs just split the files if you want to print them separate For the bunny: it should be printed the way it is positioned in the stl, that seems to be the best way to print it. In any…
Schublade - Simpler Aufbau - keine Supports nötig. Mit Endstop Bilder beachten. Der Griff wird einfach unten an der Schublade angeklebt. Kleine Schublade: 170x74x27 Große Schublade: 170x129x27 -------------------- Drawer - Simple…
update: i uploaded a version of my spool roller i use for this holder - see link Ender 3 v3 KE spool roller easy to print → https://www.printables.com/de/model/710011-ender-3-v3-ke-se-spool-holder-roller-easy-to-print upside down spool…
Easy to print desktop organizer You can store up to 4 USB sticks, 2 SD cards, 2 Micro-SD cards, 15 pens, scissor, ruler and many more
first of all i fixed a few holes in the surface ;-) main reasone to remix it was to fit it for printers with aproximmatly 20x20 heatbed. it is a awsome stand. love it. fits perfect for pint with kush nug hi and floatplate. ac-adapter can…
Movable z axis belt tensioner added bracket for filament sensor for Ender 3 V3 KE original screws can be used - cannot be used together with the original spool holder!!! Required parts: 1x M3 x 12mm 1x M5 Washer 2x F695 Bearings 2 parts -…
standalone nebula pad holder (rotated 90 degrees) for this cool project → https://github.com/ballaswag/guppyscreen IDC 10 pin 2,54mm male/female extension cable do work to extend the Nebula cable →…
Grow tent temp / humidity monitor holder for 16mm posts
Grow tent blink outdoor cam 3 holder for 16 mm posts . use the original screws supplied with the camera -------------------------- Grow Zelt Blink Outdoor-Cam 3 Halter für 16 mm Pfosten . Benutze die Schrauben die mit der Kamera…
Nebula Pad mount to mount the Nebula Pad on top of the gantry (5% tilt). To extend the cable, use a IDC 10 pin 2,54mm male/female extension cable e.g. → https://www.ebay.com/itm/272617069892?var=571737481000 *Also need a USB-C extension…
small grinder, only 45x25 mm with storage compartment for almost 1g I made it for " I'm in a hurry " situations when its no time roll a joint. Put some of your herbs in it, grab your papers and you're ready to go lid with/without keychain…
I made this to be able to print it on a smaller heatbed and to be able to use it together with floatplate and pint rail guards I use velcro to hold the stand in place. Despite the smaller size of the stand, my pint has never fallen over…
I don't like the angle of normal mounts when riding a motorcycle/ATV because the camera points too far down and usually only shows the speedometer, which is why I built this one. I printed all of them with PLA, 4+ walls, >30% infill and…
Just a simple mount for the Creality Nebula camera. It use the original position and screws of the Nebula Pad. Best to use it with a standalone Pad stand - > see my models ;-) *printed my screw with Hyper PLA (carefully tighten the screw…
english Size: 10x10x7 cm (3.9x3.9x2.7 inch) I added 2 versions off the lid for PLA and TPU - loose (normal) and tight. I recommend using TPU but PLA is just fine also. --------------------- deutsch Größe: 10x10x7 cm Ich habe 2 Versionen…
Nebula Pad mount to mount the Nebula Pad outside you cabinet. Easy, fast print, support not really needed. To extend the cable, use a IDC 10 pin 2,54mm male/female extension cable e.g. →…
Tiny, easy-to-print winter landscape with snowman and holder for an LED light. A perfect gift or nice little christmas decoration Diameter is about 11cm. The opening for the LED light is 38mm in diameter. The hats are only plugged in and…
just made it a little bit more flat. thanks to shk1d29 for your idea Print Settings Printer: Geeetech A10 Rafts: No Supports: No Infill: 20 Filament: ecoPLA PLA
english bowl/planter with/without pluggable edge in different designs the edge is simply plugged into the holes in the bowl and should hold by itself. if it does not hold by itself, use some glue. ------------ deutsch Schale mit/ohne…
SodaStream cap dispenser for up to 8 caps. In the bottom of the opening I glued a thin piece of fleece, looks nice and it rattles a little less not for glass bottles caps ----- SodaStream Deckel Spender für bis zu 8 Deckel. In den Boden…
Tassimo Hänger - zum kleben oder schrauben
Work in progress. Driven approx. 3000 km without problems.. so far.. it may have to be scaled up for 1-2% to stick to the hub a little better. will test it - sometime xD simple bearing cover splitted into 2 parts so there is no need to…
Tiny, easy-to-print winter landscape with snowman. A perfect gift or nice little christmas decoration Tiny Snowman with LED light https://www.printables.com/de/model/656048-tiny-snowman-with-led-light Have fun :-)
Kirby with a knife - new version, build from scratch my old remix can be found here > https://www.printables.com/de/model/471993-kirby-with-a-knife-remix-face-added Please, don't judge my painting skills xD
i like the idea, but it doesn't fit my geeetech A10 (GT2560 V3) - also, the original parts don't fit together right!? i modified all part - may need some little improvement on the bottom part https://youtu.be/gc65BmI7iTc Print Settings…
hemp stand for my joint cases https://www.printables.com/model/830544-joint-case-with-screw-lid-with-keychain-lid
Stand for AC Infinity Smart Controller 69 PRO Use the original screws that came with the controller. Alternatively, you can also use other screws with a head diameter of 5mm.
MTR S-12 - Chin Mount Cam (the design of the mount is not yet perfect and will be revised when the opportunity arises) >25% infill i used PLA and it seems to be durable enough but fell free to use any filament you want. please use a…
SD card holder, only 15 x 5 x 4cm (5,90 x 1,97 x 1,58 inch) with space for 13 SD cards, 4 Micro-SD cards, 3 USB, 3 pens After changing to a new filament brand I had problems with the tolerance of the SD/Micro SD card slots so I made a new…
Cookie coaster Filament I used = Polymaker Polyterra PLA Earth Brown 3 different sizes: For 60, 67, 82 mm cups (or scale it to every size you want ;-) ) For the chocolate chunks I used a random brown acrylic paint.
side walls for iFlight iX2 V2 2.5 inch Print Settings Printer: Geeetech A10 Rafts: Yes Supports: Yes Infill: 20+ Filament: 3dJake PLA black Post-Printing ============= Category: R/C Vehicles
i don't like to fill in the cigarettes in the original piece :-p use 13x5x2mm magnets Print Settings Printer: Geeetech A10 Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 20 Filament: Demu PLA
shortened arm for garden highpro fan (5W)
To wszystkie aktualnie dostępne wyniki.
