Liczymy pasujące modele…
Drill depth stop used to drill multiple holes at the same depth easily. The default settings are for CHC M3 bolts but the parameters can be tweaked for any drill bit size and any bolt size in Freecad. Note: If you want other sizes and…
I love my headsets from beyerdynamic but sometimes I am really fed up with the prices of spare parts and how flimsy they are, I regularly change ear pads, cables, headbands and sliders. So I designed those from scratch to be tightened…
I made this gyroscope looking puzzle to enter the Brain Teaser Puzzles contest. You can play with the dimensions (parametric table) but be careful with the width on small diameters because the “key” can be blocked and the puzzle unable to…
Airgun pellet box for 4,5 mm (.177) ammunition. It's an attempt to replicate competition box that are expensive with one that should achieve the same goal with a speed filling mechanism. Update The staggered version is now available.…
I made this spinning top card (ISO/CEI 7810 ID-1) to enter the Kit Cards contest. The credit card format follow the ISO standard but may be a little bit too thin for optimal use, but at least it works and fits in your wallet ;)…
Model I made this handrest to raise my 603 with a Universal stock. It is parametric to help suit your needs, and everything can be used in combination but it is fully modular to give you options. BOM For the 10 mm base setup: 1x M5 HU nut…
I made these knuckles to enter the Finger toys contest (and ended up as disqualified). Great toy to lose your friends, works better if you already have a grudge. Update: The v2 should be more comfortable in the hand and a little bit less…
Compact stand for Rockwell 6C or 6S with all its plates. Can be used with razor assembled or completely disassembled. Holes are for water drainage.
I made this hair pin block to enter the Hair Accessories contest. I have no idea if it works correctly because nobody have long hair in my family… I you want it to be resized to fit your needs you can use the source file or ask me…
The model is made to be as simple as possible and easy to print on the flat opening without support. The default models are for RWS/JSB (20 mm) and H&N/Buinger (22 mm) cans, even if the can's diameter is often the same across brands, the…
This is a remix from forkineye for my second entry to the Low Poly contest. It has been reshaped with lower polygons to meet the criteria and resized.
Oral-B/Braun Toothbrush's head holder for charging station. The design is not perfect because the charger is not made around real ellipses but the spring effect of the model is enough to be stable.
Finally a real sphere puzzle. To make the puzzle you need to print twice almost every pieces except for the “axis” and “core_latitude” or use the file with all the pieces. I know the file naming is weird but I was loosing my mind finding…
Spool for ribbon of 10 mm wide and around 22 m long. Better than some spool made of ribbon rolled around a polystyrene foam core. Can remind nostalgia of the cassette era when the ribbon is transferred :) Note: The spool holder can only…
I was really satisfied with the cover for my Merkur 34c so I made one for my new Rockwell 6C. This cover fits nicely but not too tightly to avoid trapping water inside the cover as much as possible and can be used with all the plates.
I was looking for a blade cover for my Merkur 34c safety razor and what I found was: Expensive. Flimsy and not really practical. Really well built but annoying for an every day use (travel cover hard to remove). So I designed 2 covers…
I made this well known YES puzzle as my second entry to the Brain Teaser Puzzles contest. To solve the puzzle you need to make a symmetric shape (a little bit like tangram).
After owning an Umarex Colt Government 1911A1 CO2 pistol (cal. 4.5 mm (.177) diabolo) I found that the right grip (CO2 cartridge cover) moved around a lot and the grips are not that good so I intended to adapt wooden grips from real 1911…
I made this dual sphere puzzle as my fourth entry to the Brain Teaser Puzzles contest. To “solve” it the small sphere should be inside the bigger one. Easy to understand a little bit less to build. You can play with the dimensions…
I made this solder wire dispenser to replace my pen, where I had to make a wire spiral with a screwdriver shank and put it in a BIC pen (tube with the cartridge removed). Now I can pull the wire with my hand but also block it in place by…
I wanted the filament cleaner as simple as possible and it seems it wasn't done by someone else…
I finally assembled my Lily58 keyboard that slept in a drawer for 4 years and I made a simple parametric cover to keep it safe when traveling. The extra room in front of the screen is for the battery cable. I use a Velcro strap to…
I made these adapters to use my Mitutoyo 530-122 vernier caliper to measure wear on my car disc brake rotors and avoid the outer lip left when the rotor sees a lot of wear. The offset should be 20 mm, if your printer is not accurate…
I made this model a long time ago, inspired from the P88 Champion to fit an LPA sight on my Umarex CP88 Competition. Compatible sights with the CP88 (only the rear): SPR45CT30 SPR45CT18 SPR45CT07 Note: You will also find the files for the…
I made this second gyroscope looking puzzle because I like puzzles. You can play with the dimensions (parametric table) but, as always, be careful with the width on small diameters. To make a puzzle you need 12 pieces (yes the naming is…
I made this sand mold to enter the Sand Molds contest and it was funny to shape the crenels like a nuclear sign. All the relief angles are at 4 degrees and should be enough to remove the wet sand from the mold. Note: It is easier to print…
After buying a new simplehuman dishrack, I discovered that the bamboo knife holder has been removed from the new design so I made a new one. At the moment the blade clearance is shorter than with the previous one but it can easily be…
Adjustable Z support for the mechanical endstop from Creality. BOM : 1 x M3x30 screw 2 x M3x10 screw 3 x M3 nuts 1 x Spring (mine is 7x15 mm from paoparts.com)
A rocking puzzle. It's more like a rocking chair on a porch than a wild concert. To make the puzzle you need to print two times the piece #1 and then one of each for the others.
Classic six-piece burr puzzle. You can change it's size and shape simply with parameters.
Those are lids for Raaco Boxxser insert A9-1. Because the polycarbonate cover is not tight enough for really small hardware like small washers. Print Settings Printer: CR-10 V3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution:…
Multiple mods exist for the DT770 PRO headphone. So, I made this jig to be able to drill holes accurately in multiple enclosures. Also useful for balance mod where you need to drill both enclosures of the headphone. The jig is parametric,…
Background holder to take picture of small product or object with a nice background. The background should be fairly stiff like a sheet of paper, fabric will not work well. The sizes are parametric and can be adapted to your needs in…
The original Arianeplast spool is based on the bambulab spool for their refills. The difference is that it uses zip ties instead of glued ribbons which are way thinner. So this remix is meant for easier removing of the zip ties. Note:…
A Sphere puzzle again, yeah! I like those puzzles, so to make one you need to print two times the piece #1 and then one of each for the others.
Cap for the bite valve of the Rockrider water bag from Decathlon. Only one water bag from Decathlon have a cap on its bite valve, so I designed this one for all the other sharing the same valve. The fit is pretty snug, maybe too much.…
I made this sand crenel mold as my second entry to the Sand Molds contest . All the relief angles are at 4 degrees and the ejector is not the best but make it a little bit easier to release the crenel.
Battery holder made to spot weld strips (nickel or steel plated) on two AAA Ni-MH batteries. It is designed to also solder “legs” more easily to your battery pack (see pictures). It is parametric to be easily modified for any battery…
The CR-10 V3 sensor bracket is, to say the least, useless because the angle it makes with the spool and the extruder is generating a lot of friction. I already solved the problem with a previous model to relocate the stock sensor . This…
I made this tweezers holder to enter the Beads contest. If you don't want to carry a Swiss army knife you can at least have one of its very useful tools always with you. At the moment the hole for the cord is 4 mm in diameter.
I bought a Tascam DR-05X to record a better audio track than my dashcam, the problem is that every vibration is transmitted to the recorder via the windshield suction mount. So I decided to make the simplest mount possible with what I had…
The CR-10 V3 sensor bracket is, to say the least, useless because the angle it makes with the spool and the extruder is generating a lot of friction. So, the basic idea was to put the spool above the sensor, but it is way easier to put…
My G13 is slowly dying so I tried to keep somewhat the same feeling of a wrist rest with my Lily58. Even if it is the second/improved version I need to test it way more to check if it needs more tweaks. Important: My Lily58 keyboard uses…
The CR-10 V3 sensor bracket is, to say the least, useless because the angle it makes with the spool and the extruder is generating a lot of friction. I already solved the problem with a previous model to relocate the stock sensor . This…
I made this Egg and yolk puzzle to enter the Easter 2025 contest. To “solve” it the small sphere should be inside the shell. It is very easy. The base is only necessary if you want to display the puzzle on a shelf or a desk. You can play…
I made this razor shelf organizer to enter the Bathroom Shelves contest. The default holder settings are for a Merkur 34C razor and a pack of Feather blades.
I made this tool to align drywall studs when fixing them back to back, it was meant to use 4 magnets at first but I only had two at hand. It uses round neodymium magnets. It is a parametric model to a certain extent (screws and OD are not…
Adjustable Z support for the mechanical endstop from reprapdiscount.com. The clamp diameter is for a 10 mm stub. It is inspired from oTTo's support http://www.thingiverse.com/thing:16458 2020/09/03 : Revision 3 is just a little bit more…
My trusty MendelMax 1.5 from 2013 is showing it's age and it is the second time I modify the X axis. This time after using a CR-10 V3 I decided to opt for rollers instead of rods and Igus bushings, so, I bought a fully mounted CR-10 pro…
I designed the enclosure after watching a video from 3D Printing Ideas showing tests with a filament box. The brackets inside are for two 40 mm fans tilted by 5° to circulate air around the top of the silica gel and move the moisture in…
To wszystkie aktualnie dostępne wyniki.
