Liczymy pasujące modele…
Sure, there are a few handles on here, but they are all smooth and round. This one better fits with the angular nature of the printer and the mods I have. Also, no supports. This prints flat on its side. Will your hoooooge hands fit? I…
My daughter wanted me to make this. I wanted to add a space in the bottom ribs, I was threatened with disowning. I saw a few on here, but they were quite small (this one stands about 130mm high), and mostly solid (this one is…
I have taken on board some of the feedback that made the original less than ideal and provide a V2. The improvements are: thinner walls - more space inside text prints better not indented the sharpness of the rough edges reduced Smooth…
Dissatisfied with the Aeropress 'travel kit', still got to carry a whole raft of things - like coffee and the filters? I gotcha! Print instructions EDIT 2020-06-14: corrected file list. EDIT 2022-05-30: Added the 120mm pot. When I got my…
NOTE: Now Version 2 exists which are a bit easier on the filament and fingys. Take tablets every day, need a way to remember which days you've taken? I've gotcha! Print instructions These are the original stacking pots I made, and they…
Do you take tablets every day and want to keep them to hand but the boxes are way too bulky to stick in your overnight bag? I gotcha! Print instructions I originally designed some stacking pill pots a while back but they are bulky. I…
I'm not the greatest of fans with the Creality series of printers with the attached filament holders but in an attempt to make the printer as stand-alone as possible, there is no other option. This spool holder attaches to the 3030…
Inspired by a spool drawer system and paint holder for completely different spools I don't have, I thought I'd retask the dozen or so Prusament spools I do have. Print instructions The Prusament spools do come apart, you have to be quite…
Need a honey-like bee for something? I gotcha!! Print instructions I needed a bee for a project I was involved in, but couldn't find one that met my needs, so I created this one that prints in multiple parts and slides together. Add some…
Need some quick plant pots? I gotcha! Print instructions My daughter designed a plant pot a few years ago, and I printed it out for her but I was surprised how long it took to print such a small thing (about 3 hours). I have a lot of…
I was challenged with building a rocket over a weekend for a challenge at work. No time for testing or planning or, well any actual real science, but ok. 60 hours of elapsed time went into designing, printing, testing, redesigning,…
Only need to carry a single dose of a couple of tablets around with you? don't want to carry the box? I gotcha! Print instructions In the same way I vasemoded my stacking pill holders, I thought I'd do something similar to my pill-shaped…
My other instances of OctoPi are a messy affair of cables and dragging things about. Wouldn't it be nice if everything attached to the printer with short cables... Why, yes Nigel, it would :) Tada Octopi on a Raspberry Pi 4B, attached to…
E3D socks will fit the mini and worked well for me, but there is some noise in the community about how stable they are. I wanted my own. If you're based in the UK and would like one of my prototype moulds or socks, private message me.…
Not your average nametag - name your entire room! The process to create this in OpenSCAD is reasonably simple. Create your name using a font of your choice (best use one that is simple and does not have any super fine detail. This will be…
Prusament spools only have filament clips once per side per revolution. That's not helpful if the 2 sides are not aligned, and you're just a few millimetres short. But, I gotcha. The version I got inspiration from was round… this is…
The horn is 210mm high, so you will need a taller printer. It prints well in PLA or PETG. You should probably switch off the " Fill Gaps " setting on your print. While the majority of this model is 2 walls thick, sometimes in corners it…
This model is only really useful if your name is Nigel, in which case, cool! this is more about the process though. Attached is an OpenSCAD example of the process (remove the .txt extension - c'mon Prusa what have you got against .scad…
I just needed some labels that were not too big and didn't need me to write on them. These little signs support Avery L7651 and compatible labels. You may also want to waterproof them with a little clear nail polish. Also included are…
Have you taken your Fucitol today? what? you've not got any on you... I gotcha! Print instructions For the record, Fucitol is an alcohol sugar that is neither alcoholic nor sweet, that is made from kelp. It is also pronounced…
There are 2 options available here, you can convert yourself or another human into a unicorn, or, you can convert another animal (probably best try horses) that has a bridle and a browband that is flat, at least 130mm across and free,…
Small air plants just sit in bowls or inside shells, and that's all pretty and all, but I wanted something that showed mine off as people walked into my hall… which is tricky given the size of the plant itself, but I digress. I also…
Last year I developed a planter system for the patio table that could take 2-inch net cups and I was planning on converting it to hydroponics (with better fitting joints and a water feeding cap. Several things dawned on me, not least of…
It was a rather cold snap in the UK in early December 2022 and it seemed one of my strawberry plants hadn't gotten the message that it was winter yet and continued to flower for a while. That was the main inspiration for this lamp. I also…
You can buy strawberries in bare-root format, but they were grown in soil and that's messy to get into hydroponics, plus, the roots are not configured for growing in water. Neither of these are insurmountable. But what if you have…
Got a dodgy shoulder? Don't need to constantly replace your mask with a fresh one but struggle to keep the elastic attached and feed it over the nubs of other ear savers? I gotcha! Print instructions I do have a dodgy shoulder and trying…
Not your average nametag - name your entire room! The process to create this in OpenSCAD is reasonably simple. Create your name using a font of your choice (best use one that is simple and does not have any super fine detail. This will be…
Is it a nametag? Is it a fridge magnet?… Yes, yes it is. This model is only really useful if your name is Nigel, in which case, cool!, this is more about the process though. Attached is an OpenSCAD example of the process (remove the .txt…
Mount spools on the racking of your shelving units if you have the slot together type. I don't know how universal it is, but the slot is 3mm wide, and 10mm deep. I purposely didn't make this supersized because physics and my shelving may…
Sick of trying to wash your hands against the back of the sink? Sick of all the water splashing behind the basin? I gotcha!. Print instructions This is a specific design for my kitchen tap, so may not help you unless you have the same…
I am starting to like the textured bed on the Mini and I'm swapping it out a fair bit, so I needed a place to store one bed while using the other sheet. I have a metal cupboard next to the printer so magnets are the answer. I had some…
There are 2 adapters in here, one has the standard overhang of the actual plate and the other has this removed. Neither have any of the holes or screws of the actual plate and are designed to be incorporated into your thing. There is a…
This project provides hole supports to make your DWC or Kratky tote lids a little less hacky looking and even provides a water level indicator without grommets and a see-through pipe. If you're running “Outdoors”, it can also reduce the…
Most printed fridge magnets have embedded magnets, and that is lovely, but who has time to babysit the print to insert a magnet (assuming you got all the measurements right). Sure it's a simple solution, but c'mon, where is your sense of…
Some of the information is quite useful when printing through Octoprint - well, it's nice to see a file has uploaded and is being streamed to the printer anyway. Since Prusa don't mind having the Octoprint logo when it's connected, I…
Tis the season! A lot of birds have already flown south for the winter, but, like us with our energy issues, birds have a tough time every winter. A little extra help is a good thing, and most birds are quite pretty. We have robins and…
Ok, first of all, yes you can order a seed tray from Amazon, way cheaper than the light this is made for and use the windowsill… but where is your sense of over-engineering adventure. I really just wondered if I could do some seed…
Avery labels are all well and good, but I now have a D11 printer - a tiny wee thing that prints off my phone. This is a complete redesign, but the concept is similar.
Technically not a remix, but I wanted to light Davidson3d's pumpkins. Unsatisfied with an LED, I found a torch I bought from Maplin (see below) and then tried to work out a way to make it a pillar. With the torch ends, you can use this to…
Makes taking anaglyphs really easy and using a stepper motor to drive the caddy means loads of control. Specifically designed for the Manfrotto quick release plate tripods and the Nikon D800 camera, but any similar or smaller camera will…
I had some 3mm threaded rod left over from another project and needed a spice rack in my pantry… Tada! There is a separator in here, I originally thought it might support the rods, but my inner OCD wouldn't let me make it load-bearing as…
Ladybirds are cute. Letters are good. Combine the two and you have some weirdness in the mornings. Various magnet sizes are catered for and you'll need to add a pause in your print at the relevant point. the folder names are the magnets…
The 2 Manfrotto tripods I have seem to differ in orientation and add ons so this may not be suitable for every Manfrotto. The 190XPROB has no additions and allows for a hanger that goes completely around it. The 055CXPRO3 has a spirit…
To wszystkie aktualnie dostępne wyniki.
