Liczymy pasujące modele…
Chances are you’ve heard about ocarinas thanks to the Nintendo game The Legend of Zelda: Ocarina of Time, whereas the name suggests, it plays an important role. Print this one in Blue and use to Triforce collar to make it look like the…
A pan flute, also known as panpipes or syrinx, is a musical instrument that works on the principle of the closed tube. It consists of multiple pipes that gradually increase in length (and sometimes girth) from one end to the other. Pan…
Simple wall mounted hanger for audio jack cables (1/4 inch, 6.3mm).
just a remix of the headband brace, what I've changed about the headphones is that I've made the joint holes smaller so that it fits the pins better, and also moved it so it can slot into place, made the m3 holes bigger so that you don't…
I have printed several of these and have four patch cables ready everywhere I need them! Can be screwed or velcroed down.
This is the 7th and current design of my 4-beat note tray to hold the music note duration manipulative pieces found here: https://www.printables.com/model/615947-music-note-duration-manipulatives The design has been tested extensively…
To use this stand, print two of them. On the bottom are recesses for anti slip stickers (diameter 12mm). I have printet them with PLA, works great. Use support during printing because of the recesses.
I remixed the great design made by @AndreasJade_261770 to print it from PLA in one piece using support material at the interface. Printed it standing up in about 5 hours on my Bambu Lab P1S.
I was looking for a stand for my Ampero 2 Stomp and couldn't find one anywhere so I made it. I don't think it will print very well on the side, so I suggest printing it as it stands on the desk - that gives a nice, large adhesion area.
I have Roland V-Drum TD-07KV, frame post diameter is roughly 38.15 mm. So I didn't know other Roland post sizes. So please measure before printing it. Printed with eSun ABS+ without Support. Between 20% and 40% infill is more than enough…
This is a box for storing guitar picks I made a while ago. Works really well and stops me losing my picks all the time.
I have not got round to printing this remix yet but the body is exactly the same as Tomex's original body except the front of it is now blank (no hex tiles) with a skull image added. You will will need to add a second extruder in…
Permet de ranger les câbles patch d'un synthétiseur modulaire. Compatible avec la plupart des patch. J'imprime avec 4 parois 13/100 Possible d'écrire ce que vous voulez sur la face avant me demander en MP ( faut pas être pressé je ne me…
Every gigging musician and tech knows the issue … Drumkeys always going to disappear, especially when you hand them out to other people …
Why settle for boring stock knobs when you can flex with a knob that goes to 11? Meet The OP-Z 11-er, a 3D-printable knob designed for Teenage Engineering’s OP-Z, with a peg fit so snug you won’t even need glue or adhesive—just pop it on.…
Headphone Stand The design provides sturdy support for headphones while maintaining a lightweight structure. The stand has a stable base for optimal balance and a minimalist design that keeps your workspace organized. Printed with…
Replacement foot pad for Quilter 202 Series Amp / Amplifier Head! Tested on Overdrive 202, but should work for Tone Block 202.
Updated Version 2 available easy to use. This tool allows users to create music staffs of adjustable sizes, ideal for personalized music notation. Whether you're a musician sketching ideas, a composer drafting a new piece, or a teacher…
German: Plektrum ablage für Gittaristen. Kann an einen Notenständer (o.ä) angeschraubt werden. Der Durchmesser des Ständers sollte 19mm betragen. Es hat innen eine kleine erhöhung so dass das Plektrum leicht herausgeschoben werden kann.…
This is a little tambour-door storage compartment to put in the spare space in your Eurorack. Keep your patch leads or knurlies or smaller snacks in it. I'd be delighted to hear what you use it for. 8hp and 16hp variations are here, but…
I created this EtherCon Housing that fits over several generic RJ45 connectors on cat cables. Very handy when the locking pin broke of ect. Can be printed in the orientation shown without any support.
I designed this scratch plate as a direct replacement to the original one. The original plate was scanned in 2d then imported into CAD where it was made into this design. This is in 2 pieces for the ability to fit onto a print bed - the…
A minimalist model of an acoustic guitar. You can hang it on your xmas tree or just use it as a decoration. Supports: Yes On the neck of the guitar Keep in mind: for the original model, a needle is nessesary to push the thread through the…
Ever wanted to make your trumpet a little more fancier? Well look no further! Introducing the: Trumpet Top Hat This model should fit trumpets that have a holder for a slide ring and a hole that is 4mm wide and 4mm tall. Made with TinkerCAD
A simple stand to hold your flute or whistle on the wall. This compliments the Axianov Irish Flute and Low D Tin Whistle . The flute stand has the same post diameter as the other stand model on Printables in 2024 . The whistle stand has…
Just print it flat and use supports. I made 100% infill, but that is up to you. Afterwards, I sprayed it the same colour as the speaker itself and done. Looks better in my eyes and keeps the 3D model look. Use normal 5x8mm (N52 or N35 - I…
1% of the 1% of the 1%, own a 7-string guitar. So here is to you 0.0001%ers.
I always lose my grip playing with smooth picks, so I made a bumpy one that fits my hand better. Hopefully someone else gets some use out of it as well
Generated using VennCad, Model is oriented to allow for best performance. Use tree supports at 20 deg threshold angle, on build plate only and support crit regions only. Add a negative cylinder into the slicer to remove the text above the…
Generated using VennCad, Model is oriented to allow for best performance. Use tree supports (auto) at 20 deg threshold angle, on build plate only and support crit regions only. Add 3 negative cylinders into the slicer to remove the text…
This is a Google Nest Audio Wall Mount that can swivel 360 degress. The print does not need any supports and the pad can be printed as is. However the wall mount should be printed with minimum wall count of 6 and infill at 35% for…
Lemmy from Motorhead. Print in 0.2 mm layers at an infill density of your choice. Make colour changes after every 2 mm of completed print (i.e. at 2.2 mm and 4.2 mm). I used grey, white, then black. No supports or brim required although…
Bose Soundlink Flex SE Bluetooth Speaker Wall Mount
I printed it from PETG, 0.16 layer height, 3 perimeters, concentric infill. The tall column (the spring post) needs time to cool between layers, so, to achieve optimal results, consider printing 2 or more pieces simultaneously. Print…
stampato con PLA grigio eSUN, con supporti organici (per rimuovere il supporto organico dal foro filettato, forzare leggermente con una punta e svitare delicatamente); questo primo prototipo è rigido, disegnato con una inclinazione…
Only for hardtail bridge Scale : 648mm(25.5") Documentation : Soon Clodocaster TL wood : https://www.printables.com/model/1159478-clodocaster-tl-wood Pickups modules : https://www.printables.com/model/1237530-clodocaster-pickups-modules…
Držák mikrofonu GoGEN Déčko pro Mic Stand. Vnitřní průměr 37mm a 34mm (kužel). Šířka packy pro upnutí 5,7mm.
The Focusrite Scarlett 2i2 (4th gen) has a circular volume LED around the input 1 and 2 inputs. At the time of this file's creation, there is no software solution for disabling it. This knob was designed to block out that light. This knob…
Print in place Twin Concorde Flightcase Replacement – 3D Printable Model This 3D-printable replacement for the "Twin Concorde Flightcase" is designed to securely store and protect two Ortofon Concorde-style DJ cartridges. The case…
Es una púa de guitarra simple de un milímetro de grosor sin adornos para poder añadirle texto o imágenes en el laminador. --- Is a simple guitar pick of 1mm weight with no decoration ready to be engraved with text or images in the slicer.
I'm restoring a BX-3 and the plastic front logo badge was missing, so I made a replacement based on photos I could find. Maybe this will help someone else someday... Thanks to https://www.thingiverse.com/thing:6231327 for the original…
This is a simple Guitar pick that has a small heart to improve the overall grip strength.
The model allows to mount a microphone at the hole of a Cajon. The holder has a mounting position for. Due to the long arms, there is a support ring, that stiffens the arms. I attached felt gliders at the claws (see pictures) to get a…
Only for hardtail bridge Scale : 648mm(25.5") Documentation : Soon Clodocaster ST wood : https://www.printables.com/model/1193722-clodocaster-st-wood Pickups modules : https://www.printables.com/model/1237530-clodocaster-pickups-modules…
I created a variety of sizes of mic stand cable clips. Why pay over a dollar each from the store when you can print them for pennies a piece! Tips: Print all of the sizes at first, then test them out to determine which sizes fit your…
Simple and easy to print control cover and knobs to further color co-ordinate your Prusacaster guitar. Updated Control Plate with improved mounting screw locations - 148.5mm distance between the mounting holds Added Flush Fit Knobs that…
This is a stand and dust cover that combine into a case (similar to the original Kontrol Stand). The stand brings the controller up to standard mixer height (such as Pioneer DJM mixers). It will fit the Traktor Kontrol X1, X1 MK2, F1, and…
I have a habit of using long cables that I route off the side of the case and then back in so I can bundle them up in the gaps between rows. When I was just using my single case laying flat, the cables would just stay there, but I…
It is often necessary to isolate or "lift" the studio monitor speakers from your desk or stands so they don't resonate, don't act like a secondary (unwanted) source of sound. There are some isolation foams you can buy for cheap which…
Richards Makes 3d Printed Drum System. These drums would make a perfect addition to any drummer's arsenal. Sizes include 6in, 8in, 10in, 12in, and 13in. Also Each drum can use a standard drum head or mesh drum head. (Or if you’re feeling…
Only for hardtail bridge Scale : 648mm(25.5") Documentation : Soon Wood version : https://www.printables.com/model/1237211-clodocaster-jazz-wood Pickups modules : https://www.printables.com/model/1237530-clodocaster-pickups-modules…
Concept Description: Inspired by the good old days of mixtapes and boomboxes, the Cassette CarryBox is a fun and functional storage case for your audio cassette collection. The lid features an embossed boombox design, giving it a…
Yamaha makes an official mounting kit (part no SPAT1) but it's not available for purchase in my country so I made this to mount the speakers of an MS100DR to the electric drum kit frame. Printed in PLA. Fits 4 x 16mm m5 bolts with hex nuts.
One leg It consists of 3 parts, 1x body, 2 x rings. When the body is printed, the rings are put on the top and bottom, on the bottom side stick a round 60mm diameter anti-slip tape(in pics). On the top side of the body there is a groove…
This is a 3D-printed clip to mount a Thomann Ovid system microphone onto an Irish wooden flute , designed as a replacement for the flute holder provided by Thomann. I designed it specifically for my Villoing Irish flute , but it should…
Welcome to our simple project! Screw-open Maracas – Customizable Sound Shaker (3D Printable) Discover the joy of sound experimentation with this 3D printable maracas that you can open, fill, and shake your way ! Designed as a two-part…
I am a mechanical engineering freshman at NC State for Mechanical Engineering, and for one of the intro to Engineering courses, all the freshmen make an original design. My group got the mechanical music maker category, and we decided to…
Düse zum Durchspülen von Trompeten. Anschließbar an jeden haushaltsüblichen Brauseschlauch (½ Zoll Gewinde). Auch geeignet für Flügelhorn, Es-Horn. Nozzle for rinsing and cleaning trumpets. Can be connected to any standard household…
Only for hardtail bridge Scale : 648mm(25.5") Clodocaster HANDY (Wood) : https://www.printables.com/model/1285360-clodocaster-handy-wood/files Pickups modules : https://www.printables.com/model/1237530-clodocaster-pickups-modules Rigidity…
He preparado esta pandereta típica gallega inspirada en el modelo tradicional. Puede utilizarse un parche de piel y unas sonajas para que suene lo más parecido a las tradicionales. Información del proyecto aquí:…
Hi I made this stand for my iPod Nano 4th where you can charge it also. Enjoy ;)
It is a Chickenhead knob for the power control on the Boss Katana Gen 3 50 Guitar Amplifier Combo.
CMIYGL keychain where you an put your own photo or just Tylers one
The 3D surface provides extra grip while the base remains thin and playable. Whether you're riffing through a thunderous solo or just want to show off something sick on your keychain, this pick brings both flair and function. Print it in…
This is a simple adapter to convert a Kurzweil K2500R to use a standard 240x64 graphic LCD module such as the CRYSTALFONTZ CFAG24064A-TTI-TZ module. The K2000 used a standard sized LCD module but the K2500R uses a larger module with a…
I made these bushings to lock the stock bridge of my Squier Mustang Classic Vibe when I hardtailed the Tremolo. I've seen people use electrical tape and that didn't seem as sturdy so I made these bushings. They are slightly tapered since…
keychains with inner and outter circle to put on your keys (wu tang clan)
Mur de son teuf, modulable (chaque caisson est indépendant). Un simple changement de couleur à la bonne hauteur pour avoir les grilles d'une couleur différente. Attention, grilles fines, passer en mode arachné pour la génération de parois…
This is a fully 3D-printed rain stick , a simple yet satisfying sound toy that mimics the relaxing noise of falling rain when turned upside down. Designed with ease of printing in mind, this model requires no supports and is available in…
just print it ;-) Add an additional Design with only 15 degree elevation.
Printing Instructions: All of these straps are optimized for 95a shore hardness TPU The simplest explanation of the print settings is that FOR THE CENTER SECTION ONLY you need to set the top and bottom layer count to 0, set the wall count…
Brackets to mount a Quad Cortex without the use of any double sided or hooked tape shenanigans. I have mounted it in a case where the wireless system, power, and MIDI and CAT connections are hidden in. For the right side, take a look at…
If you are like me you are a lazy bum who only practices when their instruments are within reach. Behold: a solution to have the EMEO sax on your table without the need to have it lying around and potentially falling off the table! In all…
Fully working 3D printed amp cabinet. Designed for 8" speaker of your choice. Tested with Celestion eight 15 20W @4ohms. Designed with angled speaker placement for better monitoring. Back panels are mounted by velro so you can customize…
My vision of convenient electric guitar wiring and soldering jig. Universal, not for specific guitar. Don't know is it fit to LP. Has places for 10x3mm rubber pads on legs
A small case for the picotracker. Good for protecting it from scuffs and dings, especially if you carry it with you. I wanted it to be totally usable without needing to remove it from the case, so all ports are accessible without needing…
Edit: Since Prusaslicer cant remesh negative objects I brought the top into another CAD system to finish it, and so the top now has correct holes. This model has been great for my guitars but I kept having trouble getting consistent clean…
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
Ich habe meine Noten beim Singen auf meinem iPad und hatte oft am nächsten Tag Schmerzen in der Hand und dem Arm, weil ich es doch recht verkrampft festgehalten habe. Dieser Halter mit dem Knauf ist die Lösung meiner Probleme. Erstellt…
This is a shelf to hold my Traveler Guitar on my wall. I like to hang my guitars up but as the Traveler Guitar does not have a headstock, a shelf was needed. Thus shelf has allowances for a strap to be attached while it is on the shelf,…
a little crude hack job but functional, ~4.5mm larger internal space for other usb-c cables, see pics I print with support for the usb-c cable run underneath
REGISTERED DESIGN No. 6495338 Description This custom 3D printed charging dock is designed specifically for the Positive Grid Spark LINK wireless guitar system. It provides a neat, secure, and reliable way to keep your transmitter and…
PRINT IN TPU!!! Flying v knee rest i designed for my custom 50s V I thought I might as well put it here alongside the pickguard for anyone that needs it
A keychain inspired by Kendrick Lamars 2012 album Good Kid M.A.A.D City
Description: This part was designed to replace lost or broken bass drum spur feet found on drums like Yamaha 9000/Recording Customs from the 80's. It was modeled from scratch using an original piece for reference. This part is 100% TPU,…
