Liczymy pasujące modele…
This is a pretty nice rotating rings toy which is perfect to use as a fidget toy in almost every situation. :) If you are not able to get the rings rotating freely, you can use the "looser-tolerances" version. If needed I can upload outer…
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
This is a collapsing Katana sword designed to be printed as one part. Its only 182mm high when printed but expands to over 825mm in total length! The Replaceable Single Edged Curved Blade Version is available to my Clubs members. Supports…
Wydruk około 10,75 €–13,14 € nettoWstępna wycena jednego wariantu
I decided to modify my previous model (5 in 1) Fidget Toy Spinner I wanted to get rid of the bearing and make the whole fidget smaller to fit the keys well. And as a bonus, I modified the model for print in place. So just print and click…
Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu
This is my improved version of the classic Flexi Rex. Somehow this version became the most popular one, maybe just because it doesn't break easily when handled by kids (and adults of course). I uploaded this model to Printables for…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena jednego wariantu
This collapsing Katana is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
Wydruk około 5,42 €–6,63 € nettoWstępna wycena jednego wariantu
This is a collapsing Lightsaber designed to be printed as one part. Its only 205mm high when printed but expands to over 950mm in total length! Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on…
Wydruk około 11,95 €–14,61 € nettoWstępna wycena jednego wariantu
Catapult Card A fully 3D printed catapult, prints flat within a card, so it fits in a C5 envelope, fairly powerful, lots of fun! Why Designed to be printed flat, including all the parts required for assembly. It’s a fun little toy, great…
Wydruk około 1,82 €–2,23 € nettoWstępna wycena jednego wariantu
Special herringbone planetary gear. The only way you can manufacture this piece is 3D printing as the interlocking gears cannot be assembled afterwards. Author: Emmett Lalish Print instructions Print takes roughly 3 hours at 100 µm layer…
Wydruk około 1,47 €–1,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Instruction how to train your dragon. After printing, you have to make some bends. The most important is bending of the tail a little up. You can also bend it a little into V shape Next important thing is bending of wings a little bit up.…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Taking inspiration from my original fidget toggle switch , I designed a print-in-place version that uses about 8 grams of filament and takes about 20 minutes to print on my X1C. This model is experimental (it's definitely still a…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
Let's mix things up with another type of dragon: The water dragon! This creatively designed and articulate "Water Dragon" model is engraved with intricate details that capture the imagination, giving it a sense of mystique and fantasy!…
mproved version, very smooth movement. Super relaxing effect, fight your anxiety! In order to successfully print this m
Create your own OTF (Out-The-Front) fidget knife with just three 3D printed parts! This compact design is perfect for restless hands, providing smooth OTF action for endless fidgeting fun. Watch my YouTube video for assembly instructions…
Magnet Size 6x2mm * for commercial license, Please visit my Patreon
This version of the Drill Sword prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
I was messing around with a twisty fidget egg and the next logical step was clearly a twisty fidget dragon egg. I am no good with blender, and found the awesome solid dragon egg modeled by Tony Youngblood here: At that point it was just a…
superbe pour le boulot comme pour les enfants .Au telephone il permet d'aerer les mais ,superbe objet .N'oubliez pas de liker et de poster vos fabrications . Reuploaded model: https://www.thingiverse.com/thing:4804260/files
Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…
Update April 14, 2024: Updated model to fix where a couple of the sections were sticking together. Upgrade your 3D model collection with our incredible Bone Dragon model. This well-articulated masterpiece designed by the Bearded Printer…
A cute little gecko with a flexible body and tail! Unlike the dachshund , this one prints faster and it needs no supports, while still being super fun to play with. Prints in PLA with no problems, but I assume PETG should give the gecko…
Check out My 2.0 Version of this design! Joy Fidget 2.0 A simple and easy-to-print fidget toy! That looks like a little joystick. Perfect to test your printer or just as a fidget on your desk. It makes use of a spring gear that will bring…
My daughter wants to have a Pokeball and so I designed one for her. You can open it and put Pokemon inside ;-) Use a piece of PETG Filament for the hinge. Printed well in PLA. Glue the inner rings into the hemispheres. If you want to have…
a bb gun to shot on your friends or not
This is the Michael Meyers benchy that I created using Meshy.ai. This is my first time creating a print and sharing it. Please let me know what settings I should change to make it look better. This benchy is a little bigger then normal.…
Part of my holiday collection of print-in-place flexible fabrics for Halloween! Do not scale down, only up! Enjoy! If your joints are fused, try scaling up or changing filament. Want MORE??? ~~> HALLOWEEN FABRIC COLLECTION Think I'm…
Part of my holiday collection of print-in-place flexible fabrics for Halloween! Do not scale down, only up! Enjoy! If your joints are fused, try scaling up or changing filament. Want MORE??? ~~> HALLOWEEN FABRIC COLLECTION Think I'm…
Diseño original con detalles de corona con cruz y fácil montaje de las dos piezas. El diseño al estar creado en dos piezas se puede imprimir sin ninguna complicación y facilita la omisión de soportes en la herramienta de corte. Fácil…
This model is for a Brio compatible as well as Duplo compatible train car. It's based on a 6x2 Duplo brick and has magnets on each end to mate with existing Brio cars. Each car requires the following printed parts: 1 Body, 4 wheels, and 2…
The money bin is inspired bythe iconic design from Italian Disney artists like Giorgio Cavazzano and Silvia Ziche among others. Customization using Fusion 360 Fusion 360 file is included for customizations. In particular (see picture) you…
This is a case for the Spirograph . All parts fit in 3 layers: Bottom: 155, 63, 40, and 36 Middle: 144 and 80 Top: Everything else
Greetings! And yes, I have gone off on a tangent again. This time after picking up a cheap tabletop pool set from the shops on the request of my youngest boy, I thought to myself, "I wonder if I could design a decent printable mini…
I'm big fan of Dummy 13. I usually print it in 150% for my sons and their friends. I wanted to print “parts on runner” version on my A1 Mini in 150% and faced size issues. It just bigger. So, i've modified runner to fit A1/Prusa Mini…
Standard print settings. No supports needed, no brim. Seam position - random (expert mode).
Play by yourself or compete with an opponent or play with teams; you make up the rules for your game! Hardware needed: 2 x Neodymium magnets, 5mm x 10mm x 60mm. 1 x steel rod, 3mm diameter x 65mm long. Glue (optional) 4 x Anti-Slip self…
🎃 Ready for Halloween? 🎃 Meet this adorable 3D Pumpkin — support-free, super easy to print (print in place) in keychain and Fidget Spinner version for your " trick or treat "! The eyes 👀 are printed separately and you can choose between 5…
🎃 Ready for Halloween ? 👻 Meet this adorable 3D Ghost — support-free, super easy to print (print in place) in keychain and Fidget Spinner version for your " trick or treat "! The eyes 👀 are printed separately and you can choose between 5…
Want to add more capacity to your Zius Mags but don't want to cut the stock spring rest, try this piece! Add a pop of color to your mags and raise the capacity from 12 to 15. Can hold more but wouldn't recommend it. Make sure the first…
Tonies-Holder Print in PLA or PETG, set a pause at the according layer to insert the steel disc. Make sure the hooks are reinforced with 100% infill or as I did it with as many bottom layers as necessary to fill them completely. Best use…
I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest models: https://www.printables.com/model/1024242-scream-duck
Desktop turtle sandbox. There are others and perhaps better ones, but I wanted to try my hand to fulfill request from my daughter. Some gluing required for the flange pieces that keep the lid in place. (sorry, tool not included) I have…
Firstly, if you want an arcade joystick mechanism more fit for an arcade control panel then click on this link: https://www.printables.com/model/987973-arcade-joystick-mechanism-version-3 That's my Arcade Joystick Mechanism - Version 3,…
Meet Figure the Clockrider, inspired by the latest update in 'Roblox Doors.' This unique 3D model showcases a mechanical figure perched atop a whimsical alarm clock. Perfect for fans of the game and collectors alike, this model is ready…
🎃 Ready for Halloween ? 👻 Meet this adorable 3D Cat — support-free, super easy to print (print in place) in keychain and Fidget Spinner version for your " trick or treat "! The eyes 👀 are printed separately and you can choose between 5…
🎃 Ready for Halloween ? 👻 Meet this adorable 3D Owl — support-free, super easy to print (print in place) in keychain and Fidget Spinner version for your " trick or treat "! The eyes 👀 are printed separately and you can choose between 5…
This is an insert for Kreel Manor , the boardgame. It keeps all the components from the base game and two expansions organised. I am using Sleeve Kings (60micron) sleeves to sleeve my cards, if your sleeves are thicker, the cards may not…
Finally, this 3D printed skeleton cat is available! 🐱💀 Composed entirely of 3D printed parts (head, body, and spring), you can use glow-in-the-dark filament for an even more stunning effect. Printed with Bambulab P1S. 🌟 Assembly…
I printed the ex bcar and was satisfied about the performance but the collet was kinda fragile, so I made this.
The original grip had a very sticky and tough prime that only got worse when grips were attached to the picatinny. The normal one is obviously not comfortable to hold by itself considering the picatinny rail and small size. I gained…
https://www.printables.com/model/943743-wobble-toggle-fidget-switch-print-in-place
A simple prize cup with space for customization like medal plates or text tabs
The box for this game is obnoxiously big and the lid never stays shut. I created a spacer that allows all the components to fit into one of the drawers and cut the lid off the box and reused it as a lid. Print Settings Printer: BIBO 2…
If you are italian no description is needed, if you'r not….who cares?? If you want other spinner like this, just write me a comment, and i'll prepare it! Enjoy!! -- PRINTING PROBLEMS -- I know how frustrating it can be to have problems…
I wanted to build some kitchen for my child and found various stove knobs. Decided to use this one https://www.printables.com/model/327511-stov but I could not find an base plate / counterplate. So I created one. Countersunk holes to…
Hier mein Grobhandtaster ESP Geheuse ich nutze den Taster für lustige Moderation Momente um Musik oder Videos auszulösen als Quizshow Buzzer kam der auch bereits zum Einsatz der Kreativität sind keine grenzen gesetzt was man damit alles…
I'm really glad to present to you the little articulated grumpy dragon keychains. The results are amazing, especially the multicolored versions are very lovely. You get 4 multicolored versions, 3 of them with eyes and body colored.…
Modular toy rocket version 2. Main upgrade is much better threaded joiner. Consists of many components that can be easily combined in different ways with screw joiners. Components are rocket motors, finned stages, non-finned stages,…
Print Settings Printer Brand: Creality Printer: Ender 3 V2 Supports: No Resolution: 0.2 Filament: Creality PLA Black and Gold
You have seen it before… 😂 This one is an M36 screw, 80mm long with an optimized thread. You might need to “break-in” the nut a little, by turning the nut while pulling and pushing alternately in both directions. After that the nut turns…
As part of the project “A Journey to a a free Aeon Pro X Pump Grip”, i have designed various muzzle options to dial in how the pump grip setup on the Aeon Pro X will go. These muzzles replace the one on the blaster, and do not use any…
Tactile/braille dice, can be printed on the bevel (look at the picture), no support needed. Square side 30 mm. The transparent version is petg, scaled 0.66 for 20 mm side. I used a brim.
A collection of ratchet locks ranging from 50mm - 90mm to replace any broken ones. There is a notch on one side of the ratchet lock that is flipped on some ratchets. I'm not sure if this is a left spin/right spin difference, but my cobolt…
I remixed other versions of inserts. The goal was to use the whole box and to store the mini expansions. I printed the big card container in 2 parts and then glued them together. Category: Games
Two basic tow hooks designed as replacements for broken toys. I presume you can scale these up. Recommend PETG and boosting perimeters. I needed to use supports on the bigger one.
A replacement for the broken arms of a Gravitrax Catapult. Print Instructions: Simply import these two models to your slicer and cut the models in the centre. Thus, each model prints as 2 parts that can be glued together. It also works…
Halberds made for use in medieval/renaissance combat. These halberds were designed for use in the SCA cut and thrust polearm experiment (approved for use as of 2/13/2024). -Print with TUP and Gyroid or Rectilinear infill at %10 infill to…
Spearhead made for use in medieval/renaissance combat. These spears were designed for use in the SCA cut and thrust polearm experiment (approved for use as of July 2024). Print with TPU (ALL PARTS) for them to be flexible. Print the…
This duck is a low poly remix of a creation of Tonkaprusa (link to the model below).
In dieses Modell kann man einen Stift mit 9,6mm Durchmesser spannen und bis zu 12 Fäden daran binden. Die Herausforderung bzw. das Ziel ist es damit in einer Gruppe ein Wort zu schreiben. Dabei hält jeder nur einen Faden in der Hand und…
I really love the look of the realistic octopus head by Stanos , but I wanted the nice articulated arms like those from McGybeer 's octopus. While looking around, I realized I could combine everything and even add longer arms. Since I…
A simple ladybug figurine with a removable body (twist open) . This is my first project, I encourage you to modify and fix. Dimensions 57 x 44 x 23 mm The project scales up well and can be printed in larger sizes. Printing Layer height:…
There is a small print in place catapult that can launch marble sized objects. The bigger catapult has the perfect size for ping pong balls. No supports required - best to print in petg 🔧 Key Features: Big Catapult: perfect for ping pong…
Tested and printed without issues using Cura slicer. A 20ft shipping container is a standardized steel unit, 6 meters in length, used for the safe transport and storage of goods by sea, rail, or road, and it is also commonly repurposed as…
Jan 2025. You probably should not use this, there is a better way. You can clamp to the metal buts on the front of Wasp, like the official “dragon” BCAR does that was released by Colonel Wasp themselves. ------------------------- NOTE:…
Jeremy and Garth of Jaded Parts came up with a great idea for a snap-on two finger (or three!) trigger attachment for the Professor Motor controller. I like their design much better than my own two finger trigger for that controller,…
Tried of picking up lose bills? Sack full of coins weighing you down? NO MORE! Now you can just swipe your card and keep shopping. This toy pinpad with card reader makes a great addition to any play store. update added a second file that…
This housing holds sets of magnets in positions that generate an equilibrium of forces where the magnets remain close, but do not touch. The 6 holes at 60 degree separation holds four 6 mm diameter, 2 mm thick rare-earth magnets. The…
This is the multi-part version of the lightsaber. It has been broken into different parts so they can be printed separately in different colors then glued together. There are locators for making the parts easy to glue on. The cap is…
This is delicate. There's no way to design a top that spins well and can survive rough play when printed in PLA. The stem will break in seconds. See “Playing with Your Top" below. Note: My PrusaSlicer project file and GCODE both use GCODE…
I have seen coins, and thought "where are all the bills?" So, I present to you, "LM Bucks" The back has nothing on it, I thought it would be nice to leave it blank so that the Community can leave nice messages to the kiddos. The one I'm…
Plinko Tube Dice Tower This is a dice tower inspired by Plinko mechanics. It's designed to provide fair, random rolls while being easy to print on most 3D printers—no supports required. Dice dropped into the funnel bounce off internal…
These i printed for these magnetic hard cases i have, no idea if they're universal, i dont collect cards usually. The cases i have measure around 7mm in thickness and 73mm in length, hopefully this helps to know if it'll fit your holders
With a new spool of glow in the dark filament in hand I found myself wondering just what I could print. Inspiration struck when looking out my office window at an old rusted lantern hanging on a post. Ah! That was it! A lantern. I set…
I printed two of the 1:12 size, which makes it just a little too small for Skittles and M&Ms. One in PETG and one in PLA. The PETG supports removed a little less clean, other than that, supports off, then snap the legs down and up and…
This is a remix of Thor Hammer keychain but with a twist (the hammer head is a spinner), The original one is perfect for multi color print with single extruder. The idea for this is from Aliexpress product with the same functionality.…
![Kreel Manor (+2 expansions) boardgame insert [sleeved cards]](https://media.printables.com/media/prints/1030542/images/7821235_276faf54-0f70-45a0-984a-75633e132b54_ec463192-62a6-4ea7-b8a3-f94d8b21f21f/km1.jpg)
