86 modeli
Printed in PETG with a 45 degree tilt for greater resistance. The stl file is already placed in the correct position. - Enable borders - Activate organic supports - Gyroid filling at 20%
J'ai donc souhaité avoir des connecteurs magnétiques sur le modèle train de Noël icône 10361 qui en était malheureusement dépourvu. J'ai fait un modèle simple, efficace, et rapide à imprimer. L'impression s'effectue avec un remplissage de…
Lego Technic 42036 set - Silniční motorka 375 dílů Model doporučuji tisknout zvětšený na 200 - 300 % PLA - 15% výplň Pneumatiky - TPU
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
I want to make expensive art tools accessible to everyone! Currently working on a collection of pottery ribs. Feel free to suggest another set of tools to make! 3D modelling: https://www.tinkercad.com/ Font:…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
This model is compatible with the lego system.
Battery up to 10mm x 36mm x 65mm
With this model, the specific kitchen scale can be neatly stored for example under a cabinet. Attaching can be done with a double-sided tape. Print instructions The provided model is for one side. Mirror the model in slicer for the other…
Didn't want to shell out $20 for the proprietary tool to use once so I whipped up this design. Was a bit of a tight fit but worked great. Print in default orientation, no supports. Use at your own risk.
This model is compatible with the lego system.
Today I designed a snowman with a classic black top hat — a festive little decoration perfect for the holiday season. The snowman’s body features a spiral pattern , giving it a textured, elegant look that catches the light beautifully.…
This model is compatible with the lego system.
Wall mount for LEGO City 60367 Passenger Airplane Set. The holder holds the model by the wings of the aircraft. The holder has two holes for screwing to the wall. However, the strong double-sided adhesive tape is also strong. Print…
This is an exhaust chute diverter for a Dewalt Miter Saw, and it can work for other saws as well as long as the chute's OD (outer diameter) is 39mm. Notes on Usage: Print 2x 40deg elbows and and 1x 40deg fan-out (no vacuum required) If…
I've been using the Heltec T114 with the great 3000 mAh case from Printables, and I really loved that design format https://www.printables.com/model/1451567-heltec-t114-3000-mah However, I ran into two problems: 1. The case was still a…
Check my other IKEA designs: Ikea Metod Screw On Leg Extender (402.055.99) NEW Ikea Metod Leg Extender (705.560.67) Why Lost one spacer (part 10036383 or 10039201) for Metod cabinets, didn't want to drive to IKEA for replacement. Designed…
This model is compatible with the lego system.
Bmw E30 - head light high beam lamp spacer. OEM: 63 12 1 362 036 All dimensions reproduced from original part. Perfectly fits in place of original spacer. For both lights frame (HELLA, BOSCH). Fusion360 source-file (*.f3d) attached.…
This model is compatible with the lego system.
The stock rubber way wipes on my Birmingham YCL1340GH kinda suck. I designed these upgrades in 2 pieces each. the main part can be printed in PLA, ABS, PETG or anything you want, then the wiper part printed in flexible TPU and the parts…
Lego 3027 3028 3033 3036 3456 41539 92438 91405
Holder for the Miyota, 2034, 2035 and 2036 so that it fits within NH35 cases. Gap at the 3 oclock is for the stem Large gap at the 12 oclock is for easy battery removal Square gaps at the 1 oclock and 8 oclock is for nh35 dial feet, for…
I designed this extension to increase the viewing angle for my triple monitors with a Brateck LDT33-T036 triple monitor mount/stand. Instructions Unbolt the monitor vesa bracket from existing arm Remove the plastic plug attached to…
Update (2025/02/01) : Minor edits to lid, specifically made the screen hole smaller and extruded a hollow box to prevent items from ingressing via the screen hole. Parts needed : 1xLid. 1xBase. 2xButtons. 4xM3x10 screws. Depending on your…
Print settings used: PETG 0.15mm 20% infill supports everywhere
CASE Heltec V3 com bateria 103665 3000mAh com clip para conto e alças para pendurar.
Original Seeed case modified to house a 3000mAh 103665 cell in place of the 2000mAh 103450. Modifications included extending the battery compartment by 5mm on the back, allowing it to be used with the original front, but I also smoothed…
Want to Support me? Post a Make Give it a Like PayPal Venmo: @paulorfo Cash App: $paulorfo ------------------------------------------- About: Remix of the original Heltec T114 + GPS + Li-Po case, reworked to fit the Meshnology 3.7V…
This model is compatible with the lego system.
Low poly Clefable, the final evolution of Clefairy. A mystical Fairy-type Pokémon for collectors.
Design Concept The design draws inspiration from the classic elements: earth, fire, air, and water, each represented by a unique earring shape. These artistic representations celebrate the balance and beauty of nature. Use Ideal for…
I ripped my bushings in a crash. now got new ones but decided to recreate them to have some spares on the bike when needed. RE part number RAL00363.
Support yes nozzle 0,4 infill 50 % cube
This is an AK105 style front sight for the older AKM Cyma CM036. It may fit other Cyma AKs (or other brands) if they have the same screw attachment system. You will need the original screw (or the same) to attach the front sight under the…
I made this small case to have a possibility stick it to my laptop corpus. Size is lil bit smaller then original and board have thight fit inside. Maybe it will be helpfull to some one reference board: alfa awus036axml
Basic rack mounting rails for a Mellanox SX6036 switch. The switch side rails sit in a groove on the rack side rails, very similar to a French cleat. These are meant to be used as static rails. You will need to print two of each model. I…
Case for the Alfa AWUS036NH wifi usb card in replacement of the original bulky case. PS: I need to adjust the closing o
The LEGO Shuttle Carrier Aircraft #10360 is a great model. Apart from one thing – the engines. Even before I bought it, I did not like them, they look like they grabbed the nearest thing out of the LEGO City parts bin! As soon as I got a…
Tool holder for Large Wrecking bar 325mm. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 60mm W - 22mm H - 95mm We design…
On my Toyota Sera, my clutch pedal's cushion has long dried and crumbled away. I took some measurements and printed a TPU replacement to place on my pedal. It shares a part number with a wide variety of Toyota vehicles . Print in TPU with…
My Speed Queen 203643 latch cover broke so I put this together quick to get the washer running again. Printed with PETG since that's just what I had on hand. Didn't like the screw into thin plastic so I remade it with 2x M4X20mm screws…
T096_case_back for 2x103665 battery
Vertical holder for Salter 1036 kitchen scales. Holds them upright at a 5° angle. Balance is good when docked. Ideal for propping up against a wall or inside of a kitchen cupboard.
re-render of modern interpretation of vintage 1890s patented by C.C.Packard leaf shutter, remixed from published on flickr blow-up diagram. Used image to 3d model on Makerworld with export to .stl Powered by MakerWorld-Image-to-3D (…
Just a simple cover to keep your 100mm Erowa chuck clean when either not in use, or no pallet is installed. I printed this 100% infill, using Polymaker ASA filament. I scale my ASA prints 100.5%, which seems to hit dimensions dead-on.
This is a replacement battery cover for the Salter 1036 Kitchen Scales. This took me 4 minutes to print and used less than 2g of filament when printing on my AnkerMake M5C. I designed this using Fusion360. I have also posted this on…
I would strongly advise to use supports for this case and outer/inner Brim, if its stands on the two sides were it connects with your new 3ds. You also have to put supports on the latch/locking tabs (see picture with blue circles). If you…
Zácvak na posuvné dveře do ikea skříne nahradní díl č. 10036170 tisknuté na vrstvu 0,3 material pet-g podpěry všude. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: Yes Resolution: 0,3 Filament: eko-mb pet-g Category:…
The original knobs on this cooktop are prone to their chrome finish wearing off over time. I created this to address that issue. LED Compatibility: The initial layers of this print can be made with clear PETG, allowing the cooktop's…
this is a replacement bracket for a THU6223 Remote as used by the Toto SW3036 washlet and others f3d file included for modifications - the first version i printed has a .4mm slot and support carved into it for a 3M command strip, but i…
Simple tripod adapter for the AWUS036NH. Category: Tool Holders & Boxes
Zodiac M5036 channel selector knob Category: 3D Printing
I needed a simple mount for the Alfa AWUS036AXM wifi stick. It uses a Mediatek ax-chipset and is plug and play on linux. I use it with my 3D printer to get better wifi range and speed.
This model is basically a slightly enlarged case for a common DC1036P UPS with internally-mounted non-removable 4S battery pack. The model includes a case compatible with a standard R10 board and POE board and has provisions for a 18650…
This is a case I made for shipping probes to CuriousMarc who then forwarded one to atkelar. As seen on atkelar's video about the HP 410C VTVM
This model is compatible with the lego system.
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
EN: To identify a lubrication pump. DE: Zur Kennzeichnung einer Schmiermittelpumpe.
Thrust piece for the cylinder head cover bolts of the M104 engine. OEM part number for reference: A1040160364 Twelve pieces needed per cover. Must be printed from TPU as it also acts as a seal. Best results with 80A - 90A hardness, but…
Zur Befestigung werden zwei 5- oder 6-mm-Schrauben benötigt. Die Größe der UPS-Schnittstelle beträgt 32 mm in der Dicke und 105 mm in der Breite. Theoretisch kann dieses Modell als Basis für die Befestigung anderer Mini-UPS oder Boxen…
Parametric 6.2cm tall object with rounded circular geometry and a kinetic pattern. Engineered for precise 3D printing.
this is a lego part form the millennium falcon set 75375
Silent 120mm fan mod for the MikroTik CCR1036-8G-2S router. Assembly & Details: Uses M4×10 screws to mount the fan to the top cover. The download file is an updated version of the model pictured. It features a larger cable opening and…
Parametric 7.4cm tall object with 10-sided faceted geometry and a diamond pattern. Engineered for precise 3D printing.
Parametric 8.4cm tall object with 9-sided faceted geometry and a atomic pattern. Engineered for precise 3D printing.
Parametric 5.1cm tall object with rounded circular geometry and a prism pattern. Engineered for precise 3D printing.
Parts are printed in different orientation and then screwed or glued together with small 2 mm screws. Latches are 100% perimeters
Parametric 6.3cm tall object with rounded circular geometry and a honeycomb pattern. Engineered for precise 3D printing.
Parametric 7.9cm tall object with rounded circular geometry and a cyber pattern. Engineered for precise 3D printing.
This luxury vase features a rounded, egg-like silhouette wrapped in crisp vertical pleats and angled facets that catch the light beautifully. It makes a stylish centerpiece for dried flower arrangements, pampas grass, eucalyptus or…
Update (2025/02/01) : Minor edits to lid, specifically made the screen hole smaller and extruded a hollow box to prevent items from ingressing via the screen hole. Parts needed : 1xLid. 1xBase. 2xButtons. 4xM3x10 screws. Depending on your…
Design Concept The design draws inspiration from the classic elements: earth, fire, air, and water, each represented by a unique earring shape. These artistic representations celebrate the balance and beauty of nature. Use Ideal for…
This model is compatible with the lego system.
Original Seeed case modified to house a 3000mAh 103665 cell in place of the 2000mAh 103450. Modifications included extending the battery compartment by 5mm on the back, allowing it to be used with the original front, but I also smoothed…
This model is compatible with the lego system.
This model is compatible with the lego system.
Printed in PETG with a 45 degree tilt for greater resistance. The stl file is already placed in the correct position. - Enable borders - Activate organic supports - Gyroid filling at 20%
Дисплей: https://aliexpress.ru/item/1005009572730414.html Выключатель: https://www.ozon.ru/product/dvizhkovyy-vyklyuchatel-mini-pereklyuchatel-pitaniya-dlya-arduino-maketnyh-plat-diy-i-elektroniki-1323063165/ В качестве оптоволоконных…
![Display Stand for LEGO City Passenger Airplane 60367 / 60262 / 60104 / 60022 [last update 7.10.2023]](https://media.printables.com/media/prints/606587/images/4822115_a6e78fc1-c2a2-4011-bdf4-8805c8ccdeb6_e156ec04-83f1-4f46-b5e5-fd288b717e49/60367-5.jpg)
