Wyniki wyszukiwania: 1x

Sortowanie

2539 modeli

P
PrintablesLandon Campbell

1x1 Short Vase Mode Gridfinity Bin With Magnets

I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. These work great for things like screws and nuts. There are two magnet holes that are optional…

Pobrania
818
Polubienia
79
Ocena
4,67
P
PrintablesMrViddy

Caseoh 1x1 Lego Piece

Face was Painted with Acrylic Paint And clear coated. 118mm x 80mm 5 Pieces Super Glue Required STEP 1: Add Glue, and line up then secure in Place. STEP 2: Add Face, then secure with glue. FINAL PART: add head, then secure with glue 95%…

Pobrania
630
Polubienia
26
Ocena
0
P
PrintablesJUCO

Gridfinity USB Cablemanager 1x4

This bin organizes my whole cable collection if you guys can see from the photos I use lots of USB Cables and keeping them organize was a challenge until now with this grifinity usb organizer I can pick i cable within seconds no thumbling…

Pobrania
480
Polubienia
61
Ocena
5
P
Printablesgedeyenite

9 "Credit Card" Holder - Horizontal - 1x3 Gridfinity

I liked the ideas for Gridfinity credit card holders that were already posted, but I had a slightly different use case, i.e., a shallower drawer, and felt it could hold more to maximize storage space. I don't use a magnet system, so I…

Pobrania
456
Polubienia
41
Ocena
5

gridfinity 1x2 bin dremel tools, spanner, chuck and std. dremel 3.15mm (1/8") tools

Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…

Pobrania
418
Polubienia
121
Ocena
5
P
PrintablesEl Chinn

LEGO Technic Liftarm 1x7 (6278125)

my son lost this part while building some cool original lego technic monstertruck (thanks to the LEGO company), and i was irritated not to find it somewhere here. luckily 2 were used in the model, so i started to reengineer it . the angel…

Pobrania
269
Polubienia
25
Ocena
4

hex bit holder 1x2 bin gridfinity

Hex bit holder, gridfinity 1x2 bin. There are four deeper slots for those longer bits. Print with 10% gyroid/grid infill and no support (slicer might suggest to fix an error in the .stl if so then do that). It fits the Gridfinity…

Pobrania
236
Polubienia
25
Ocena
5
P
PrintablesSimon Lundell

gridfinity 1x1 bin vase mode repeated print

LittleHobbyShop's 1x1 vase mode gridfinity bin is a nice little bin. This model is a modification that allows you to print with 1.0 mm wall thickness. This makes the bin a bit sturdier but still tiles nicely. Attached is a hand crafted…

Pobrania
211
Polubienia
51
Ocena
5
P
PrintablesBlox IsCool

1x1x1 CM CUBE

1x1x1 Cm Cube

Pobrania
200
Polubienia
6
Ocena
0
P
PrintablesBodo

1x1 units, half height, 1x1 grid Stackable Insertbox

Stackable Insertbox 1x1 units in footprint, 1/2 height two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-19 v2.2 initial public…

Pobrania
182
Polubienia
10
Ocena
4,83
P
PrintablesBodo

1x2 units, full height, 1x1 grid Stackable Insertbox Sortimo

Stackable Insertbox 1x2 units in footprint, full height compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link below this variant is available commercially as injection molded…

Pobrania
182
Polubienia
10
Ocena
5
P
Printableshoco

1x3 Gridfinity Caliper Stand

This 1x3 Gridfinity module holds a digital caliper horizontally. It is stable even without a baseplate. It is based on this model: https://www.printables.com/model/503777-caliper-stand @spikeon requested this 1x3 version so the head end…

Pobrania
162
Polubienia
20
Ocena
5
P
Printablessrirachachacha

Gridfinity Bins with Internal Dividers (1x1x3)

Simple modification of Zack Freedman's 1x1 gridfinity bins that adds internal dividers (half-split and quad-split options), deepens the internal volume, and removes the magnet feet holes from the bottom. I think I also used @Akio's…

Pobrania
152
Polubienia
19
Ocena
0
P
PrintablesOndřej Zlý

Peli Stealthlite 2460 holder for Gallet F1XF

V2 lépe sedí do helmy a lépe se do něj dává baterka. Tiskněte se 2-3 perimetry a výplní 35% aby zůstala zachována pružnost držáku. The V2 fits better in the helmet and the flashlight fits in better. Print with 2-3 perimeters and 35%…

Pobrania
148
Polubienia
14
Ocena
0
P
PrintablesJimleeQ

Gridfinity 1x1 Threaded insert soldering iron tip holder

I made this to hold my threaded insert tip set. It's stackable when filled, and the bits are arranged in size order (I've given a bit more space for the larger bits). They are arranged clockwise in increasing size from the bottom right.…

Pobrania
135
Polubienia
30
Ocena
5
P
PrintablesKeldor

Gridfinity 1x2x4.5 Hex Bin

A single Hex bin with 2 x 4 Gridfinity and 4.5mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…

Pobrania
135
Polubienia
32
Ocena
4
P
PrintablesStuggi

Gridfinity 1x1 Flux Syringe Holder

Prints very well in PETG with 10% gyroid infill and 3 outer layers.

Pobrania
112
Polubienia
8
Ocena
5
P
Printablesgedeyenite

Take-Sumi Fountain Pen Ink Bottle - Gridfinity 1x3x7

No magnets. Stores a 50ml bottle. There was a little space left over, so I made a little rectangular storage area. No supports 15% Infill PLA Fits my bottle like a glove.

Pobrania
107
Polubienia
29
Ocena
4
P
Printablesgskollnau

Bonsai pot 11 rectangular rounded (mame) 131x91x39mm

A little support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.

Pobrania
92
Polubienia
21
Ocena
5
P
PrintablesJimleeQ

Gridfinity 1x1 SG90 servo mount or storage

A gridfinity 1x1 bin to hold 1 or 2 SG90 servos. I originally designed it to hold 1 servo, and store the cable in the rest of the space, but then realised that I might as well as fixings for a second servo, in case you wanted to mount 2…

Pobrania
83
Polubienia
19
Ocena
5
P
Printableshoco

Gridfinity 1x2 Low Riser Angled Base Extenders

These are 1x2 gridfinity modules. Their function is to be an angled baseplate. They are low, but they will still raise up any module on them as well as angling them forward. There are versions with angles in 5º increments up to 20º. This…

Pobrania
83
Polubienia
18
Ocena
5
P
PrintablesAlan Duggan

Gridfinity Steel Ruler & Pencil Holder - 1x9 Split Organizer

Gridfinity Steel Ruler & Pencil Holder Due to myself only having a smaller build plate on my ender 3 I designed my own Ruler & Pencil Holder. As you will see I have split this so I can print it on my smaller plate. After printing and a…

Pobrania
76
Polubienia
20
Ocena
5
P
PrintablesJedibiker1234

Jumper Wire Connector 1x1

I designed this connector to fix together two male jumper wires similar to this: It is very helpful for small circuitry. Usually when you don't want to soldier a pair of wires to a micro controller, you can connect a female jumper wire to…

Pobrania
67
Polubienia
22
Ocena
4
P
PrintablesBodo

1x3 units, half height, 1x3 grid Stackable Insertbox

Stackable Insertbox 1x3 units in footprint, 1/2 height, 1x3 grid two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-20 v2.2…

Pobrania
63
Polubienia
6
Ocena
0
P
PrintablesTeraflop

Simple 1x and 2x Radius Finder

Use this tool to find the radius of an object with your calipers. This was created to keep the math simple. Using the 1x model, the radius of the object is exactly as measured. Using the 2x model, the radius of the object is twice the…

Pobrania
63
Polubienia
8
Ocena
0
P
PrintablesBodo

2x2 units, half height, 1x4 grid Stackable Insertbox

Stackable Insertbox 2x2 units in footprint, 1/2 height, 1x4 grid two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-21 v2.2…

Pobrania
58
Polubienia
5
Ocena
0
P
PrintablesPaul

Gridfinity Vase Mode 1x2x12 Bin

Vase Mode: Set >6mm of solid base layers. Vase Mode is hard to find in Gridfinity multi-square configurations, but for good reason. The space in the base makes you print about 5mm of solid base layers to make it work. Unfortunately,…

Pobrania
49
Polubienia
7
Ocena
0
P
PrintablesOBA

PG21 Blind Stuffing-Adapter to 1xPG9 Cable Gland/ PG21 Blindstopfen-Adapter auf 1xPG9-Kabelverschraubung

PG21 threaded blind stuffing to close unused PG21-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…

Pobrania
43
Polubienia
5
Ocena
0
P
PrintablesBodo

2x2 units, third height, 1x2 grid Stackable Insertbox

Stackable Insertbox 2x2 units in footprint, 1/3 height, 1x2 grid three of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-25 v2.3…

Pobrania
43
Polubienia
5
Ocena
0
P
PrintablesNoodles

Single HoneyComb Wall 1x1

I made this print because I accidentally super glued a part of my hexagon wall wrong leading to a 1x1 gap. (Yes, I know you don't NEED to super glue them but at my scale it just makes the whole thing more structurally sound.) I'd…

Pobrania
40
Polubienia
4
Ocena
0
P
PrintablesBodo

2x4 units, half height, 1x2 grid Stackable Insertbox

This is just one box of a bigger system with more than 80 variants in size and partition. Find the whole overview here. compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link above Changelog 2022-09-02…

Pobrania
38
Polubienia
4
Ocena
0
P
PrintablesJP

Switch holder for 1x or 2x Brennstuhl Eco Line Comfort Switch Adapter

I used a Layer hight of 0.3mm and variable layer height to smoothe the curves.

Pobrania
35
Polubienia
9
Ocena
0
P
PrintablesDusBus

Gridfinity - 1x1 - 2x Staedtler rasoplast erasor holder

Holds two 12,5mm x 18,5mm x 41mm erasors and can be stacked. Has magnet holes on the bottom.

Pobrania
34
Polubienia
2
Ocena
0
P
PrintablesJprints

Gridfinity 1x4 bin for Hongdui Chamfer Plane

I designed this Gridfinity bin to organize my small woodworking shop. This 1x4 Gridfinity bin holds the Hongdui Chamfer plane and the included tool used to change the cutting blade. The bin has no stacking lip but holes for magnets on the…

Pobrania
30
Polubienia
8
Ocena
0
P
PrintablesOBA

PG21 Blind Stuffing-Adapter to 1xPG7 Cable Gland/ PG21 Blindstopfen-Adapter auf 1xPG7-Kabelverschraubung

PG21 threaded blind stuffing to close unused PG21-openings in housings. Adapter for 1xPG7 cable gland for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffing with PG7-thread. [1] Thread types: PG thread…

Pobrania
28
Polubienia
7
Ocena
0
P
PrintablesJprints

Gridfinity 1x4 bin for Hongdui Glue Scraper

I designed this Gridfinity bin to organize my small woodworking shop. This 1x4 Gridfinity bin holds the Hongdui Glue Scraper and the included tool used to change the cutting blade. The bin has no stacking lip but holes for magnets on the…

Pobrania
26
Polubienia
10
Ocena
0
P
PrintablesOBA

PG29 Blind Stuffing-Adapter to 1xPG9 Cable Gland/ PG29 Blindstopfen-Adapter auf 1xPG9-Kabelverschraubung

PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…

Pobrania
22
Polubienia
2
Ocena
0
P
PrintablesJprints

Gridfinity 1x3 bin for Hongdui JF06 Kerfmaker

I designed this Gridfinity bin to organize my small woodworking shop. This 1x3 Gridfinity bin holds the Hongdui JF06 Kerfmaker. The bin has no stacking lip but holes for magnets on the bottom. Model was created using Fusion360 and the…

Pobrania
21
Polubienia
4
Ocena
0
P
PrintablesBrodde

Klarus XT21X Footstand

This is a flashlightstand for the Klarus XT21X model if you ever need. It is a litle hard to get the flashlight to stand up right when needed. It is used in combination with the Klarus diffuser that you can find here. The Footstand is…

Pobrania
20
Polubienia
0
Ocena
0
P
PrintablesFlix

Shocktowerbrace for Mf01x Carbon Shock Tower

For mounting the Brace on the chassis you have to use the two suplied M3*10mm countersunkscrews from the shock tower and two additonal M3*6mm countersunkscrews to mount the brace onto the shocktower.

Pobrania
20
Polubienia
6
Ocena
0
P
PrintablesOBA

PG29 Blind Stuffing-Adapter to 1xPG7+1xPG9 Cable Gland/ PG29 Blindstopfen-Adapter auf 1xPG7+1xPG9-Kabelverschraubung

PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…

Pobrania
19
Polubienia
3
Ocena
0
P
PrintablesMiquel

Ikea Skadis Three Bottle Holder (2x 37 mm/100 ml/AK + 1x 33mm/60ml/AK)

Strong bottle holder for Ikea's Skadis peg system. Holds three bottles: 2x of 37 mm diameter (like AK's 100 ml bottles). 1x of 33 mm diameter (like AK's 60 ml bottles). Uses six pegs for better strength. How to print: Print on the side…

Pobrania
18
Polubienia
3
Ocena
5
P
PrintablesErikSi

148 Vorsicht: Spielende Zahlen! Galaxy 11x21 A4

Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.

Pobrania
13
Polubienia
0
Ocena
0
P
PrintablesLate

WS281B 1x8 trust macul camera mount

WARNING! Can get very hot with prolonged use I would suggest to print it like in the photo as otherwise I had adhesion problems. Shaving the groove for the camera wire on the back can make the mount centered if it isn't.

Pobrania
13
Polubienia
2
Ocena
0
P
Printablessrirachachacha

Wera Gridfinity Screwdriver Rack 1x2 - Larger Diameter 14.55mm

Remix of Wera Gridfinity Screwdriver Rack 1x2 that includes larger holes (14.55mm max diameter) for other screwdriver models (specifically, in my case, a set of Teckman T3 - T5 torx drivers).

Pobrania
11
Polubienia
6
Ocena
0
P
PrintablesNoWarrenty

Gridfinity Screw Measure Tool, 1x1 Mini Edition

There are two versions: one that goes from 4 to 36mm in 2mm steps and one that does that only to 20mm and from there on in 5mm steps - because most metric screws are available in 5mm steps above 20mm. It has a M5 printed thread where you…

Pobrania
2962
Polubienia
893
Ocena
4,96
P
PrintablesJerrod H

LEGO Flower 1x1 (24866) for Giant LEGO Wreath

A giant-scale version of the LEGO Flower "Plate 1 x 1 with 5 petals” (24866) piece from 2018, intended for use on the popular Giant LEGO Wreath . Interior diameter of the fitment is 30.0 mm; the same as the basic 1x1 stud piece. Redrawn…

Pobrania
2785
Polubienia
1225
Ocena
5
P
PrintablesMatthew

Gridfinity Deep 1x1 Bin

This bin follows the design of the original Gridfinity basic bin. However the internal space extends down into that space normally reserved for the magnets. I've exported several sizes but if there's something that you would like to tweak…

Pobrania
2696
Polubienia
432
Ocena
5
P
PrintablesYardboy

Stacked HSW Wall Panels 2/4/6/8x211x248

These are 2-, 4-, 6-, and 8-stack versions of the HSW 211x248 wall panel. Print at 0.28 layer height with 5+ perimeters to avoid infill. There is a one-layer separation between each panel. Import the STEP file to your slicer, split the…

Pobrania
2477
Polubienia
787
Ocena
3
P
Printablesidenny1

Gridfinity Micro SD card holder 1x1x3 (added step file)

This was inspired by Zack Freedman's Gridfinity project. My take on a Micro SD card holder for Gridfinity. I created using Onshape . Added step file for easy changes.

Pobrania
2236
Polubienia
206
Ocena
4,76
P
PrintablesSamsonite

HSW 211x248 Border

Trimmed version of Gdschaf border to fit the Honeycomb storage wall 211 x 248 panel, which is about the largest panel you can print on a Bambu Labs printer.

Pobrania
2035
Polubienia
531
Ocena
4,88
P
PrintablesLittleJoeMuc

Gridfinity Ram Storage (Desktop - 1x4, 2x4, 3x4)

Update (08.12.2023): I reworked these models to meet the correct Gridfinity Specs. I based the first version on this model: https://www.printables.com/de/model/399759-actually-parametric-gridfinity-base-grid-bins , which sadly does not…

Pobrania
1856
Polubienia
208
Ocena
5
P
Printablesvier2acht

Bambu Lab P1P full printable enclosure mod (P1X)

This is probably the first fully printable case mod for the P1P (maybe). Important Update: 23.01.2023. Printing these Files is complicated. ABS/ASA/PETG all failed because of Warping, the parts are to thin and large. Even with my X1C i…

Pobrania
1816
Polubienia
235
Ocena
5
P
PrintablesMyStoopidStuff

Gridfinity 1xY Multi Compartment Lidded Bins with Tabs Version 2.1 in 3U, 6U and 9U heights

There is an updated bin design which has latching lids available at the links below (under “Other Stuff”). The version here does not latch closed (it was never intended to have that function, and only has a tab). Update - 2/20/2026: If…

Pobrania
1693
Polubienia
772
Ocena
4,93
P
PrintablesFanBlox Company

REWORK Articulated 1x1x1x1 Roblox Figure (Classic and Forsaken)

1x1x1x1. with extra parts to make Forsaken 1x1x1x1. Print in PETG with tree supports for best results (In my opinion). UPD 1/13/26: Remade face to be more accurate. Added old face to Extra parts. Added full Forsaken version parts. UPD…

Pobrania
1436
Polubienia
70
Ocena
4,75
P
PrintablesLittleJoeMuc

Gridfinity Ram Storage (Laptop - 1x2, 2x2)

Update (08.12.2023): I reworked these models to meet the correct Gridfinity Specs. I based the first version on this model: https://www.printables.com/de/model/399759-actually-parametric-gridfinity-base-grid-bins , which sadly does not…

Pobrania
1423
Polubienia
197
Ocena
5
P
PrintablesMakerTom

Gira System 55 Frames (1x - 5x)

Replacement frames for Gira System 55. You can choose from single outlet to 5x outlet frames. All my original frames and plates (white) are breaking after 15 years, so i decided to CAD and print them, adding some design improvements…

Pobrania
1373
Polubienia
269
Ocena
5
P
PrintablesLong

Toy Binoculars for Kids, Personalizable, 1x mag :)

Toy Binoculars for Kids Coudln't find any good toy binoculars with eye spacing that worked for kids, so I made my own. I copied some aspects of a few different binocular designs I found out there. I modeled the support piece in already.…

Pobrania
1324
Polubienia
150
Ocena
5
P
Printablesame

Gridfinity 1x1 lid

OpenSCAD model to build a 1x1 lid for gridfinity storage. From the model you can see the dimensions of the gridfinity base, and that the model is trimmed all around by 0.25mm within the 42mm grid.

Pobrania
1144
Polubienia
148
Ocena
4,9
P
PrintablesAlex

SpeedyBee Mario 5 GPS Mount for 21x21mm GPS module such as HGLRC M100-5883

This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 21x21 mm HGLRC M100-5883 GPS module on a SpeedyBee Mario 5 frame. GPS mount with GoPro v2: better fit and easier…

Pobrania
1104
Polubienia
44
Ocena
5
P
Printablesmhwlng

Gridfinity 1x2 bit holder (stackable)

Gridfinity 1x2 bit holder I used a 0.2mm layer height with a 0.4mm nozzle. Included is the f3d file Included is a height extender (stl + f3d) if you want to stack two units.

Pobrania
1061
Polubienia
119
Ocena
4,95

Gridfinity 1x2x6 credit card holder

It's a simple 7 card holder based on Gridfinity. All the cards are easy to take in/out, which was my main design goal. #gridfinity

Pobrania
1052
Polubienia
127
Ocena
5
P
PrintablesMichael Jones

1x1 Gridfinity 9 SD + 4 MicroSD Card Holder

1x1 Gridfinity 9 SD + 4 MicroSD Card Holder for storing memory cards. I couldn't find one that was quite the size and shape I wanted, so just made my own. Found this useful stacked on top of another simple 1x1 bin in my drawer.

Pobrania
1048
Polubienia
258
Ocena
4,4
P
PrintablesDavid Gadling

Gridfinity Glue Stick Holder - 1x1x1

This will hold anything with a diameter ≤ 27 mm and height ≥ 36 mm in a 1x1 gridfinity square. For example, an Elmer's washable school glue stick fits really nicely! This was inspired by the other model but: taller to handle the stick…

Pobrania
1010
Polubienia
80
Ocena
4,93
P
PrintablesQWake22

HSW Edges for 211x201

A border I created using Xander's OpenSCAD file for my HSW. Hopefully, it might save someone else the trouble of finding the best design. It suits wall-honeycomb-k1-211x201.stl for 220x220 size bed such as my Ender 3 S1. Print as many…

Pobrania
967
Polubienia
223
Ocena
4,8
P
Printablesjpgleg

Gridfinity 1x3x14 pen holder / desk organizer

Small desk organizer (1x3 Gridfinity base) to hold pens and related desk paraphernalia: mine holds a pair of scissors, a bunch of pens, nail file, box cutter, and a couple of small picks and screwdriver tools. Reorganizing my desk and…

Pobrania
962
Polubienia
96
Ocena
5
P
PrintablesJorge

MMSS 1x1 Module - Nozzle Wiper

This module, for 4 Nozzle Wipers , works with in conjunction first introduced with the Multi-Modular Storage System -MMSS. It works on the current printers: P1P, P1S and X1C. Pre-made modules, here there are several, and many are…

Pobrania
957
Polubienia
56
Ocena
4,81
P
PrintablesBenBreaksThings

Gridfinity 1x1x3 SD Card Caddy (no magnets)

Gridfinity compliant 1x1x3 block with 7.9 mm gap between each card for ease of access. No holes for magnets, my printer isn't dialed in enough to do those holes, so my entire Gridfinity collection is without.

Pobrania
929
Polubienia
133
Ocena
4,92
P
PrintablesGildef

18650 1x4 4S1P Li-ion battery holder

18650 battery holder 1x4 4S1P. Remixed from : https://www.thingiverse.com/thing:4700523

Pobrania
924
Polubienia
52
Ocena
5
P
Printablesidenny1

Gridfinity AAA Battery 1x1x3 or 2x1x3 (added step files)

Gridfinity AAA Battery 1x1x3 or 2x1x3 created using Onshape adjusted battery diamenter. Added step files for easy changes.

Pobrania
917
Polubienia
54
Ocena
5
P
Printablesvakul

WAGO 221-41x DIN rail holder

Remix of OV1A creation. Liked the snap fit and clean design.

Pobrania
907
Polubienia
74
Ocena
5
P
PrintablesMB_MODELS

Lego plate 1x2

Lego plate 1x2

Pobrania
902
Polubienia
15
Ocena
4,5
P
Printablesandrepadua

Gridfinity 5U Tall Bins - 1x1 to 5x5

I tried to generate all combinations i could fit on my Bambu. Magnets have a tolerance of 6.20, which works perfectly when printing the bins with a 0.6mm nozzle. Scoop A Scoop is the rounded ramp inside the bins. The position of the scoop…

Pobrania
885
Polubienia
314
Ocena
5
P
Printablesbenrr101

Ikea Galant Drawer Organizer 1x2

This is a simple, modular drawer organizer for the Ikea Galant file drawer units. This thing is the 1x2 organizer that is 1/2th the width of the drawer. Print 2 of these to fill one row across the drawer - or mix and match with the 1x1…

Pobrania
863
Polubienia
105
Ocena
5
P
PrintablesMetal Injection

Pill Box 1x a day

1x a day version of Pill Box 2x a day Weekly pill box. Compartments for up to two times per day. Print instructions Category: Organization Summary 1x a day version of Pill Box 2x a day Weekly pill box. Compartments for up to two times per…

Pobrania
836
Polubienia
55
Ocena
4,64
P
PrintablesWaschtl

Gridfinity 1x2 SDCard bin with lid (Parametric)

This is my SD-Card storage solution i designed using this Gridfinity Addin for Fusion360 . It can store up to 13 SD-Cards, and 9 Micro SD-Cards. The bin has little grooves on the inside, so the lid snaps in place and stays on. V11 Update…

Pobrania
816
Polubienia
137
Ocena
4,94
P
PrintablesMyStoopidStuff

Gridfinity 1x2 Watch Case Version 2.1 (12U)

Update - 2/20/2026: If you care about the future of 3D printing… Please inform yourself about the legislation which is currently being considered in Washington, California, New York and Colorado, and will restrict and regulate 3D…

Pobrania
759
Polubienia
226
Ocena
4,9
P
Printablesidenny1

Gridfinity USB A & C holder 1x1x3 or 2x1x3 (added step files)

This was inspired by Zack Freedman's Gridfinity project. My take on a USB-A & USB-C holder for Gridfinity. I created using Onshape . Added step files for easy changes.

Pobrania
753
Polubienia
109
Ocena
4,86
P
PrintablesDJ

Andromeda Ascendant in XXXL Format (LxHxW: 50x21x25cm) (Gene Roddenberry) with stand

I have revised the model of “morenostefanuto” to be 3D-printable. Need to mention that I am not a “Andromeda Fan” or “Trekki” but this Andromeda Ascendant model is really huge and looks really fantastic. The dimensions are: length: ca. 50…

Pobrania
744
Polubienia
56
Ocena
0
P
PrintablesFudge

Lego Brick 1x1

Lego Brick 1x1

Pobrania
741
Polubienia
25
Ocena
5
P
PrintablesDrK

Coffee filter holder (1x4)

A simple holder for 1x4 sized coffee filters. Best printed with the longest edge facing the bed.

Pobrania
706
Polubienia
76
Ocena
5
P
Printablesmaggoh

Time-of-Flight Case ESP32 C3 Super Mini + VL53L1X Time-of-Flight (ToF) ranging sensor for smart home

Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini with an VL53L1X / TOF400C sensor and keep the whole thing as small and modular as possible. Later on, the project will be used with ESPHome and…

Pobrania
693
Polubienia
76
Ocena
5
P

Scifi Gridfinity 1x2 Box

Do you like Gridfinity? Like Storing Stuff? Hate Bland Designs? Try this Scifi-looking Gridfinity 1x2 Storage Box!

Pobrania
692
Polubienia
214
Ocena
4,89
P
PrintablesTailS MeDiA

V3.1 Gridfinity Big/Small Parts Project Tray W/ 1x1 Screw Bin, 63 Slot Grid Magnet Tray & Stackable Lid

UPDATE Version 3.1: updated the fillet on the inside of the small squares to make grabbing screws easier. Version 3.0: I have included 2 models that use a 63 slot grid for ultra small magnets. One of the 2x2 trays has the grid embedded if…

Pobrania
691
Polubienia
124
Ocena
5
P
PrintablesMushbrandon

Gridfinity 1x1 Sidecutter and Tweezer Holder

This is a 1x1 Gridfinity container used to store a single pair of side cutters and a single pair of tweezers. The side cutters shown in the picture and used to model the slot within this container can be found here . This model was…

Pobrania
680
Polubienia
77
Ocena
4,8
P
PrintablesEivind Birkemo

HSW - 211x201 Stack - Without AMS

Honeycomb Storage Wall 211x201 that you can print in stacks. important to print it with outside up and with ironing enable on all top surfaces. I recommend to print the test file first to see if the print settings is good. After print,…

Pobrania
675
Polubienia
109
Ocena
5
P
PrintablesTomie M

BIC Lighter Holder Gridfinity 1x1

Gridfinity 1x1 5U height. The v2 version has a slightly improved tighter tolerances and an updated design (chamfers to easily slide in)

Pobrania
638
Polubienia
61
Ocena
4
P
Printablesbulbasaur0

Gridfinity 1x1x3 combo bin and micro SD card holder

This is a remix of idenny1's Gridfinity 1x1x3 micro SD card holder. I've removed half of the microSD card slots to make this a combination bin and micro SD card holder.

Pobrania
637
Polubienia
84
Ocena
4,7
P
PrintablesJW Designs

GRIDFINITY - 1x1 - 16 Hex-Bit Organizer

I designed this hex bit holder as none were quite how I wanted them. This organizer holds a total 16 Hex-Bits. I also designed a 1x2 Gridfinity 32 Hex-bit Holder that can be found here! Has holes for magnets and can be stacked on top of…

Pobrania
635
Polubienia
83
Ocena
5
P
PrintablesBenBreaksThings

Gridfinity 1x3 block, storage for (8) 9v batteries

Made in TinkerCAD, no fancy fillets for rounding to accommodate any 9v standard size despite edge rounding. Tested with batteries that were wrapped in plastic and still had space to place without issue, but not too loose.

Pobrania
628
Polubienia
61
Ocena
5
P
PrintablesAndreas Mass

Gridfinity 1x1/1x2 bin 2x divider Add-on for cases

2025.08.26: Added 1x2 bin divider versions for when you need to store longer objects. 2024.12.13: Added a STEP folder in the file section containing models of each version in case you need to modify one of these for your custom bins.…

Pobrania
600
Polubienia
199
Ocena
4,88
P
PrintablesTim

lego technic 1x15 liftarm 6321716

obscure technic 1x15 with perpendicular holes. was missing from my AT AT and I didnt want to wait on shipping Print Settings Printer Brand: Anycubic Printer: Kobra **Rafts:** No Supports: No **Resolution:** .1 Infill: 100% **Filament:**…

Pobrania
593
Polubienia
54
Ocena
5
P
PrintablesAeolus

Dremel | Gridfinity | 1x1 Organizers

A set of organizers for Dremel paraphernalia. I use them to organize my dremel's bits and bobs on the tiered gridfinity base plate .

Pobrania
591
Polubienia
138
Ocena
5
P
Printablesthelanlegend

Multiboard 1x0.5x1.5 Multigrid Snap Bin

Custom shallow-depth bin for Multiboard (http://multiboard.io). Using this one to conveniently hold small tools like a Leatherman multitool. Could use some iterating but will work until there are official 0.5 depth bins in the system.…

Pobrania
586
Polubienia
63
Ocena
5
P
Printablesgotigers

Tikka T1x Cheek Riser

Tikka T1x Cheek Riser. Mount with 2 sided tape.

Pobrania
586
Polubienia
26
Ocena
5
P
PrintablesJorge

MMSS 1x1 Module - MicroSD

This module, for 4 microSD's , works with in conjunction first introduced with the Multi-Modular Storage System -MMSS. It works on the current printers: P1P, P1S and X1C. You can see in the context, with the specially designed MMSS case ……

Pobrania
583
Polubienia
50
Ocena
5
P
PrintablesTritschi

4 Versions of SD Card Holder: 4xSD or 2xSD+4xMicro or 8xMicro Cards or 1xSD + 6x Micro, 1 Lid for 2 Sides

I downloaded and printed the sd card holder from "mmurase00". Then I figured out that the print can cause that sd card (micro and general sd as well) could either fall out of the slot or you have so much resistance that you run a high…

Pobrania
574
Polubienia
72
Ocena
4,8
P
PrintablesTailS MeDiA

Gridfinity Big/Small Parts Tray W/ Removable 1x1 Screw Bin & Stackable Lid

UPDATE: I have created screw bin holders in 2x2 grid sizes for plates and other bigger parts as per my field research data. I’ve also created 1x1 lids for the screw bins! The big parts tray has 3 xrta small slots, 2 small slots, one…

Pobrania
574
Polubienia
83
Ocena
5
P
PrintablesBram

Simple 6x1x2 #Gridfinity bin

Design description I needed a 6x1 bin and couldn't immediately find one. My print-bed is large enough to print it diagonally, so I didn't want to deal with sideless bins and simple created one myself. This has a height of ⅔, stackable…

Pobrania
570
Polubienia
40
Ocena
5