Wyniki wyszukiwania: 1x3

Sortowanie

330 modeli

P
Printablesidenny1

Gridfinity Micro SD card holder 1x1x3 (added step file)

This was inspired by Zack Freedman's Gridfinity project. My take on a Micro SD card holder for Gridfinity. I created using Onshape . Added step file for easy changes.

Pobrania
2243
Polubienia
206
Ocena
4,76
P
Printablesjpgleg

Gridfinity 1x3x14 pen holder / desk organizer

Small desk organizer (1x3 Gridfinity base) to hold pens and related desk paraphernalia: mine holds a pair of scissors, a bunch of pens, nail file, box cutter, and a couple of small picks and screwdriver tools. Reorganizing my desk and…

Pobrania
966
Polubienia
97
Ocena
5
P
PrintablesBenBreaksThings

Gridfinity 1x1x3 SD Card Caddy (no magnets)

Gridfinity compliant 1x1x3 block with 7.9 mm gap between each card for ease of access. No holes for magnets, my printer isn't dialed in enough to do those holes, so my entire Gridfinity collection is without.

Pobrania
929
Polubienia
133
Ocena
4,92
P
Printablesidenny1

Gridfinity AAA Battery 1x1x3 or 2x1x3 (added step files)

Gridfinity AAA Battery 1x1x3 or 2x1x3 created using Onshape adjusted battery diamenter. Added step files for easy changes.

Pobrania
917
Polubienia
54
Ocena
5
P
Printablesidenny1

Gridfinity USB A & C holder 1x1x3 or 2x1x3 (added step files)

This was inspired by Zack Freedman's Gridfinity project. My take on a USB-A & USB-C holder for Gridfinity. I created using Onshape . Added step files for easy changes.

Pobrania
753
Polubienia
109
Ocena
4,86
P
Printablesbulbasaur0

Gridfinity 1x1x3 combo bin and micro SD card holder

This is a remix of idenny1's Gridfinity 1x1x3 micro SD card holder. I've removed half of the microSD card slots to make this a combination bin and micro SD card holder.

Pobrania
638
Polubienia
84
Ocena
4,7
P
PrintablesBenBreaksThings

Gridfinity 1x3 block, storage for (8) 9v batteries

Made in TinkerCAD, no fancy fillets for rounding to accommodate any 9v standard size despite edge rounding. Tested with batteries that were wrapped in plastic and still had space to place without issue, but not too loose.

Pobrania
628
Polubienia
61
Ocena
5
P
Printablesri100

Gridfinity 1x3 Flipper Zero holder (with and without the rubber case)

A 1x3 Gridfinity unit for storing your Flipper Zero.

Pobrania
541
Polubienia
47
Ocena
4,56
P
Printablesmichelluccote

Gridfinity Heat-set Insert Tips Storage 1x3 Bin

This gridfinity part is made to store this set of heat-set Insert tips: https://www.amazon.com/dp/B09VL41T7K?psc=1&ref=ppx_yo2ov_dt_b_product_details It comes label with exact sizes for each tip. Feb 27th 2023 Update: I added a v4 version…

Pobrania
491
Polubienia
92
Ocena
4,75
P
Printablesyandre

Gridfinity (1x2, 1x3 and 2x3) 1/4 inch hex bits holders

Gridfinity (1x2 and 1x3) holder for 1/4 inch hex bits. Inclined design to fit into a tool chest drawer. 14/10/2023: 7 and 8 slots versions. 25/10/2023: Adding a 1x3 version with 12 slots. 08/12/2023: Adding a 2x3 version with 12 slots for…

Pobrania
471
Polubienia
54
Ocena
5
P
Printablesgedeyenite

9 "Credit Card" Holder - Horizontal - 1x3 Gridfinity

I liked the ideas for Gridfinity credit card holders that were already posted, but I had a slightly different use case, i.e., a shallower drawer, and felt it could hold more to maximize storage space. I don't use a magnet system, so I…

Pobrania
456
Polubienia
41
Ocena
5
P
PrintablesLandon Campbell

1x3 Short Vase Mode Gridfinity Bin With Magnets

I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. This longer one works great for screws or hot glue sticks. There are optional magnet holes with…

Pobrania
390
Polubienia
39
Ocena
4,5
P
PrintablesTim Reasoner

Gridfinity 1x3 Jumper Wire Holder

I made a 6u height Gridfinity Storage Box by Pred (now parametric) https://www.printables.com/model/543553-gridfinity-storage-box-by-pred-now-parametric/files for all my small electronic components. This jumper wire holder was made using…

Pobrania
382
Polubienia
57
Ocena
5
P
Printablesidenny1

Gridfinity Phone Charger holder 1x1x3 or 2x1x3 (added steps file)

This was inspired by Zack Freedman's Gridfinity project. My take on a phone chargers holder for Gridfinity. I created using Onshape. Added step files for easy changes.

Pobrania
356
Polubienia
57
Ocena
3,67
P
PrintablesMadeByAdam

SD / MicroSD Card holder Gridfinity tray (1x1x3)

SD / MicroSD Card holder Gridfinity tray This holds 10 SD and 10 MicroSD cards in a 1x1x3 Gridfinity tray.

Pobrania
334
Polubienia
41
Ocena
5
P
PrintablesChris K.

Gridfinity 2x1x3u Battery Holder CR2032

UPDATE 2025/01/19: It seems my model got messed up prior to uploading to Printables. I have uploaded now a fixed model with a battery gap of 3.75mm (on paper, which is the loose fit) and will also recreate the tight fit model (3.45mm…

Pobrania
334
Polubienia
14
Ocena
5
P
PrintablesRoitax

Gridfinity Credit Card Holder 1x3

1x3 Gridfinity Block for storing up to 5 Cards horizontally. Fits inside the short upper Ikea Alex drawers.

Pobrania
316
Polubienia
39
Ocena
5
P
PrintablesPhants

Gridfinity 1x3 LTT Stubby Screwdriver

Designed to support a stowed LTT Stubby Screwdriver with or without a bit inserted in the shaft.

Pobrania
307
Polubienia
33
Ocena
4,9
P
PrintablesK2_Kevin

Hex Bin Gridfinity 1x3

This Hex Tray offers thicker walls for a more rugged tray. 1x3 Gridfinity base plate.

Pobrania
306
Polubienia
41
Ocena
5
P
PrintablesC T

Allen Keys SAE Metric Gridfinity 1x3

I couldn't find any Allen keys for Gridfinity that has both SAE and Metric slots so I made this up. Prints fine at 0.2mm. Shout out to Zack Freedman for coming up with Gridfinity. (https://thangs.com/designer/ZackFreedman)

Pobrania
305
Polubienia
33
Ocena
5

Gridfinity Pinecil Pine64 stackable bin 3x1x3

Gridfinity bin for pinecil. Mine is Aliexpress Pine64 version. Fits one TS100 and main unit. Stackable. Created with Fusion gridfinity plugin.

Pobrania
284
Polubienia
19
Ocena
5
P
PrintablesMooshSquisher

1x3 Gridfinity Baseplate for SV06 Plus

This is simply the weighted Gridfinity baseplate (1x3) with an extension that snap-fits to the vertical extrusion on the power supply side of the Sovol SV06 Plus . It is a tight fit and will take a little effort to snap on. However, I…

Pobrania
279
Polubienia
78
Ocena
4,83
P
Printablesraw n

STACKABLE Gridfinity LR44 Battery Holder, 10 pc. 1x1x3

I don't know why but the original model is not stackable with the batteries in it. (The red arrow mark in the photos.) So I enlarged its height to 3U and it's stacking nice. Also added a label area because I like the label.

Pobrania
274
Polubienia
34
Ocena
5
P
PrintablesAtom Bearner

Gridfinity 3x1x3 Milwaukee Fastback 6 in 1

A simple Gridfinity bin for the Milwaukee fastback 6 in 1 (48-22-1505) that fits pretty well. It's a 3x1 configuration. It also includes a blade storage.

Pobrania
252
Polubienia
42
Ocena
5
P
PrintablesCopperLion

Vials case with different 1x3 gridfinity inserts for insulin, glues, peptides, beauty etc

2 different sized inserts for different vial sizes. I removed the square extrusions in the lid, it prints a tiny bit faster and is easier to fit foam into if you want to do that. See original model for the bottom half of the case, I…

Pobrania
243
Polubienia
33
Ocena
0
P
PrintablesMewraz

Gridfinity 1x3x3 Leatherman ARC

Gridfinity bin for Leatherman ARC. Tool is easy to pick up and under the tool there is a handle to pick up the bin. Pictures show a print with color change at the top 5 layers. Also ironing is turned on for smoother top surface.

Pobrania
238
Polubienia
44
Ocena
5
P
Printablescogspace

Gridfinity 1x3 LTT Screwdriver Bits (x48) Holder [Magnetic]

NOTE: This print is designed to be paused at Z = 9.5 mm using an M600 command so that six 60 x 10 x 3 mm bar magnets (~$6 on Amazon ) can be inserted before resuming the print. Gridfinity-compatible screwdriver bits holder - designed…

Pobrania
237
Polubienia
45
Ocena
4,75
P
PrintablesSparkinium

Gridfinity 1x3 USB/SD/MicroSD Holder

I wanted a USB holder to live in my desk drawer that mixed high density with ease of access, as well as versatility. This holder can hold 12 USB devices, 12 SD cards, or 28 MicroSD cards. I find its density is low enough that it's still…

Pobrania
236
Polubienia
33
Ocena
4,83
P
Printablesplomdawg

Gridfinity 12x Paint Pen Holder - 1x3

Sharpie recommends storing paint pens tip-up. Fits Sharpie, Decocolor, and the pens I got from AliExpress.

Pobrania
223
Polubienia
40
Ocena
5
P
Printablesidenny1

Gridfinity AA Battery 1x1x3 or 2x1x3

Gridfinity AA Battery 1x1x3 or 2x1x3 created using Onshape adjusted battery diamenter.

Pobrania
218
Polubienia
20
Ocena
5
P
PrintablesDarkBrave

Better 9V Battery Gridfinity Holder (1x1x3)

Small Gridfinity 1x1x3 module that holds 2 9V batteries. Based off Jerr_074's design, but I modified it to have the lip at the top and to be a 1x1x3, rather than whatever weird size their's was. They can stack while empty, but not when…

Pobrania
212
Polubienia
19
Ocena
4,86
P
Printablesevilblubb

Gameboy Advance SP Gridfinity 1x3

1x3 Gridfinity holder for a Gameboy Advance SP.

Pobrania
207
Polubienia
20
Ocena
5
P
PrintablesPanache_

Gridfinity 1x3 Leatherman Wave Flat

Just wanted a spot for a weatherman wave laying on its side. I made another version which is deeper but haven't printed it out to test it yet.

Pobrania
206
Polubienia
39
Ocena
5
P
Printablesdamien.d2

Gridfinity Hex Bit Tray Stackable 1x3x4

Gridfinity tray for hex driver bits with corner extensions to allow stacking or a lid. The two files are the same model, but one includes the PLA recycle logo on the bottom. Some of the bits I have in my set are slightly longer than the…

Pobrania
206
Polubienia
42
Ocena
4,75
P
Printablesplomdawg

Gridfinity Paint Bottle Holder - 1x3

Holds 3 craft smart branded paint bottles

Pobrania
205
Polubienia
33
Ocena
0
P
Printables3D Print Fun

Gridfinity wall mount 1x3

I remixed this model since it has very little clearance for the screws, they would hit the Gridfinity boxes.

Pobrania
204
Polubienia
35
Ocena
5
P
Printablesjunit1337

Gridfinity Stackable Funnel 1x1x3

This funnel is optimized to be stackable as 1x1x3 container, so it can be stored within Gridfinity more easily and also allows the usage with no need to hold it. The funnel opens to one bottom side to fill divided bins easily and seals…

Pobrania
197
Polubienia
52
Ocena
5
P
PrintablesGekoPrime

Gridfinity 1x1x3 bin with label and finger scoop

The dimensions of Pred's bins are a little different from Zack's and don't quite fit into a baseplate I designed to the gridfinity.xyz specifications. In the process of troubleshooting this.

Pobrania
194
Polubienia
21
Ocena
5
P
PrintablesPimpusław

LEGO Technic Compatible Special Liftarm 1x11x3

LEGO Technic Compatible Special Liftarm 1x11x3

Pobrania
187
Polubienia
36
Ocena
0
P
Printableshoco

Gridfinity Superglue 1x1x3

This 1x1 Gridfinity module is 3u high. It holds four 3g tubes of superglue, two with the lid down and two with the lid up. Opened tubes should be stored lid up so they don't leak. This module is designed without any through-holes, so if a…

Pobrania
183
Polubienia
39
Ocena
5
P
PrintablesLandon Campbell

Gridfinity Nozzle Holder/Storage 1x3 (With Magnets)

No supports required STEP file included to adjust magnet hole sizes or nozzle labels

Pobrania
174
Polubienia
21
Ocena
5
P
PrintablesTimo

1x3 Square Resistor Box Holder

This is a customized version of the assortment system box from Alexandre Chappel. It has space for 21 containers to store resistors. The original resistor storage drawers can be found at https://www.thingiverse.com/thing:3889132 Watch his…

Pobrania
173
Polubienia
20
Ocena
5
P
PrintablesPanache_

Memory Card SD, Micro and USB Gridfinity 1x3

Organize your memory cards. Made it low profile to fit through my top drawer

Pobrania
171
Polubienia
8
Ocena
5
P
PrintablesKmorrow63

Gridfinity Box 1X3

Just a basic 1X3 box for the gridfinity system by Zach Freedman. I used this one for business cards.

Pobrania
170
Polubienia
7
Ocena
5
P
PrintablesJR

Gridfinity Bin - CR2032 Batteries (1x3x4)

Gridfinity bin designed to hold 11 CR2032 batteries. Bin size is 1x3x4.

Pobrania
167
Polubienia
28
Ocena
5
P
PrintablesVLAD MARIUS

LEGO Flat Tile 1X3

This is a LEGO Flat Tile 1X3 (3 tiles = brick). The tile is similar to the tile 4558168, but it does not need to be white.

Pobrania
165
Polubienia
13
Ocena
0
P
Printableshoco

1x3 Gridfinity Caliper Stand

This 1x3 Gridfinity module holds a digital caliper horizontally. It is stable even without a baseplate. It is based on this model: https://www.printables.com/model/503777-caliper-stand @spikeon requested this 1x3 version so the head end…

Pobrania
162
Polubienia
20
Ocena
5
P
PrintablesKrzysztof

Gridfinity plastic razor scraper and blades storage 1x3x5u with lip

It's just a Gridfinity holder for a cheap (but great) plastic razor scraper. Angled scrapper recess to hide blade and expose handle, storage for as many blades as possible, and a lip to allow stacking when not in use.

Pobrania
161
Polubienia
37
Ocena
3,5
P
Printablessphink

Gridfinity 1x3 thin wallet holder

Gridfinity holder for thin wallet, 30º of inclination on slot 1x3 grid, 5 and 8 height, no magnets, stackable if empty

Pobrania
155
Polubienia
10
Ocena
5
P
Printablessrirachachacha

Gridfinity Bins with Internal Dividers (1x1x3)

Simple modification of Zack Freedman's 1x1 gridfinity bins that adds internal dividers (half-split and quad-split options), deepens the internal volume, and removes the magnet feet holes from the bottom. I think I also used @Akio's…

Pobrania
152
Polubienia
19
Ocena
0
P
PrintablesKeira Wiele

Gridfinity Husky Allen Set Holder (1x3)

Remix of a great set up since I only needed space for 1 and not 3 :) \ No supports, printed at 0.3 layer height for speed from PLA

Pobrania
149
Polubienia
14
Ocena
5
P
PrintablesArthur Felk

1x3 Schrauben Boxen für Werkbank Küpper Werkbank Schrauben Ordnungssystem Aufbewahrung Sortierung

Modulares Ordungssystem für schrauben und Kleinteile in Werkbänken und Werkstätten. Mit laschen zum herausnehmen und beschriften. Material: PLA+ Läyerhöhe 0,2-0,4 mm Wanstärke 1,5 mm (sehr Stabil) Modular organization system for screws…

Pobrania
146
Polubienia
27
Ocena
0
P
PrintablesBryBryOrange

Gridfinity Divider Plate 1x3x1

Divider for oddly shaped tools. I like it for kitchen implements.

Pobrania
146
Polubienia
23
Ocena
0
P
PrintablesPanache_

Gridfinity 1x3 Benchmade Bugout

Drop your Benchmade Bugout into a gridifnity slot.

Pobrania
140
Polubienia
28
Ocena
5
P
PrintablesBuzzKillBillZ

Gridfinity ER32 Collet Holder (1x1x3)

Gridfinity ER32 Collet Holder (1x1x3) AKA (42mm x 42mm x 25mm) that can hold one (1) ER32 collet.

Pobrania
136
Polubienia
9
Ocena
5
P
Printableskgierke

Gridfinity 1x3x4 Arduino Nano Storage

Gridfinity storage container for Arduino Nanos. It holds up to 5 assembled nanos and up to two without legs.

Pobrania
133
Polubienia
16
Ocena
0

Gridfinity Opinel no. 8 1x3x0.5

This is a perfect place to plop your Opinel no. 8 with the blade facing up for the ultimate tactical, package opening, or apple slicing advantage. I don't know what you do with your knife. Inspiration and attribution: Gridfinity storage…

Pobrania
132
Polubienia
15
Ocena
5
P
PrintablesPanache_

Gridfinity 1x3 Benchmade 940 Knife

It's a snug fit so I made it so that you just need to press down on the top for the bottom to pop up enough to grab it.

Pobrania
127
Polubienia
14
Ocena
0
P
Printableszombie

Stackable gridfinity LR44 battery holder, 10 pc (1x1x3) with built in label

The original wasnt stackable but the one i remixed is. I decided to emboss the LR44 on the model itself. I had no need for the holes on the bottom so i took those out but i uploaded a version with them as well. Its a bit tough to get the…

Pobrania
127
Polubienia
22
Ocena
5
P
Printablesidenny1

Gridfinity Dupont wire holder 1x1x3 (added step files)

This was inspired by Zack Freedman's Gridfinity project. My take on a Dupont wire holder for Gridfinity. The slots are tapered to hold wires better. I created using Onshape . Added step files for easy changes.

Pobrania
125
Polubienia
24
Ocena
5
P
PrintablesChris K.

Gridfinity 2x1x3u Battery Holder AAA

When empty, another 1x1 or 2x1 Gridfinity entity can be stacked on top.

Pobrania
125
Polubienia
11
Ocena
5
P
PrintablesQuentin

Gridfinity 18650 holder 1x3x4

I wanted a 1x3x4 unit that could store vertically the maximum of batteries. Without magnet holes Without stackable lips (as it is not stackable) Battery holes are 19mm wide (I wanted it to fit with any battery wraps). I printed mine with…

Pobrania
123
Polubienia
4
Ocena
5
P
PrintablesBobBlazevic

Gridfinity 1x3 Two Knife Rack

Gridfinity 1x3 Two Knife Rack You know the Kitchen and Bathroom are going to be next. I had to design this for my utensil drawer. (and the contest) Original Gridfinity design by Zack Freedman

Pobrania
122
Polubienia
16
Ocena
0
P
PrintablesJR

Gridfinity Bin - SATA Feeler Gauge (1x3x4)

A thing to hold the SATA 32-piece feeler gauge set (ST09407SJ). Here's a link to the tool: https://www.satatools.us/products/automotive-specialty/feeler-gauge-sets/st09407sj-32-pc-feeler-gauge-set-002-100mm

Pobrania
122
Polubienia
12
Ocena
4
P
PrintablesAlex Silva

Gridfinity Gorilla XL Glue Holder 1x3

Holds Gorilla XL glue container at 22.5 degree angle. Includes holes for 6x2mm magnets (friction fit)

Pobrania
115
Polubienia
27
Ocena
5
P
PrintablesVLAD MARIUS

LEGO Brick 1X3

This is a LEGO Brick 1X3 (3 plates = 1 brick). The brick is similar to the brick 362201, but it does not need to be white.

Pobrania
115
Polubienia
8
Ocena
5

LEGO-1X3-S

LEGO-1X3-S

Pobrania
112
Polubienia
16
Ocena
4,5
P
PrintablesMewraz

Gridfinity 1x3x3 Leatherman Bit Kit

This gridfinity bin holds the Leatherman bit kit. A maximum of 2 bit sheets can fit and it will still be stackable.

Pobrania
109
Polubienia
18
Ocena
5
P
PrintablesJamie Clarke

Gridfinity Plastic Razor 1x3

Note: Hasnt yet been printed to confirm fit. Standard print settings apply, its a pretty simple model. It is suitable for this type of plastic razor blade or ones like it:…

Pobrania
108
Polubienia
16
Ocena
0
P
PrintablesGreg

Gridfinity 3x1x3u 5x 100mm (~4") Bit Bin w/PFM Stackable

Gridfinity 3x1x3u bin with dividers for 5x 100mm (~4") bits with press fit magnet holes (PFM) This design fits 5x 100mm bits, is stackable, and has press fit magnets (PFM) It is recommended the outside corner magnet holes be used to limit…

Pobrania
108
Polubienia
16
Ocena
5
P
PrintablesBodo

1x3 units, full height, 1x1 grid Stackable Insertbox

Stackable Insertbox 1x3 units in footprint, full height compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link below this variant is available commercially as injection molded…

Pobrania
107
Polubienia
7
Ocena
5
P
PrintablesG114

Gridfinity 1x3 - 3x Liquitex 118ml

A 1x3 Gridfinity cube to hold 3 x Liquitex Basics Acrylic 118ml paint tubes. The hole is ø 38.5mm wide and should fit other paint tubes with a +/-38mm diameter. Tested with: Liquitex Basics Acrylic 118 ml Reeves Acrylic Acrilico 75ml Let…

Pobrania
107
Polubienia
19
Ocena
0
P
Printablesgedeyenite

Take-Sumi Fountain Pen Ink Bottle - Gridfinity 1x3x7

No magnets. Stores a 50ml bottle. There was a little space left over, so I made a little rectangular storage area. No supports 15% Infill PLA Fits my bottle like a glove.

Pobrania
107
Polubienia
29
Ocena
4
P
PrintablesVLAD MARIUS

LEGO Plate 1X3

This is a LEGO Plate 1X3 (3 plates = 1 brick). The plate is similar to the plate 362301, but it does not need to be white.

Pobrania
104
Polubienia
2
Ocena
0
P
PrintablesPNPrintwerk

French Cleat Holder for Gridfintiy 1x3

Simple Gridfinity Base for a French Cleat system. Other sizes coming soon. The print does need supports and at best a brim around the back side.

Pobrania
102
Polubienia
20
Ocena
0
P
Printablesidenny1

Gridfinity Kingroon KP3S Tool holder 1x1x3 (added step files)

This was inspired by Zack Freedman's Gridfinity project. Kingroon KP3S Tool holder for Gridfinity. Holds allen keys (1.5mm,2,mm2.5mm and 3mm) , wench and tweezerzs I created using Onshape. Added step file for easy changes.

Pobrania
101
Polubienia
23
Ocena
5
P
PrintablesGeorge Baker

Gridfinity 3x1x3 Bin for Magigoo Adhesive Stick (no magnets, no holes)

The bin was created with GridfinityGenerator ( https://apps.autodesk.com/FUSION/en/Detail/Index?id=7197558650811789&os=Win64&appLang=en ) and then adapted to fit the adhesive stick.

Pobrania
100
Polubienia
10
Ocena
5
P
PrintablesCleversigner

technic brick 1x3 twisted

Additional part for Lego technic

Pobrania
99
Polubienia
17
Ocena
0
P
Printables303composites

Biro 1x3 train track special piece

I made this from wood filled pla generic normal settings for my M5C with 10% infill and it turned out pretty nice. Fit is loose as I have some very old handmade track that has a wide range tolerances. There are two versions a 1 inlet 3…

Pobrania
99
Polubienia
17
Ocena
5
P
PrintablesMat

#Gridfinity 4x USB-C adapter holder 1x1x3

These USB-C adapters are a little bulky, so I think 4 is the perfect number for a 1x1 base. They slot in at 45 degrees because… that's less boring. The slot dims I used were 8.6mm x 2.75mm, which is a slightly higher tolerance than I…

Pobrania
96
Polubienia
9
Ocena
5
P
PrintablesChristoph1985

Lagerdummy für Vespa PX80-200 Lima 25,1x37,9x15

Lagerdummy für Vespa PX80-200 Lima 25,1x37,9x15 Damit kann die Kurbelwelle probeweise und ohne Kraftaufwand im Motorgehäuse montiert werden. Hiermit ist ein Messen für z.B. Steuerzeiten möglich.

Pobrania
96
Polubienia
5
Ocena
0

LEGO-1X3-L

LEGO-1X3-L

Pobrania
95
Polubienia
14
Ocena
4,5
P
Printablesflo_underscore

Gridfinity AXA Lathe Toolholder 1x3x4

This model lets you store a AXA lathe toolholder in a 1x3x4U GridFinity box. The toolholder is modeled after a Shars 250-101, so I can't guarantee that other brands fit as well. There is just enough room for your average indexable tool.…

Pobrania
94
Polubienia
19
Ocena
0
P
Printablesnerd_merdules

Gridfinity 1x3 HOTO 24-in-1 driver tray

Gridfinity tray for your HOTO screwdriver

Pobrania
92
Polubienia
13
Ocena
0
P
Printablesgskollnau

Bonsai pot 11 rectangular rounded (mame) 131x91x39mm

A little support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.

Pobrania
92
Polubienia
21
Ocena
5
P
PrintablesBodo

1x3 units, half height, 1x1 grid Stackable Insertbox

Stackable Insertbox 1x3 units in footprint, 1/2 height two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-20 v2.2 initial public…

Pobrania
90
Polubienia
6
Ocena
5
P
PrintablesAlex Silva

Gridfinity Niimbot D110 1x3

Fits Niimbot D110 Label Printer, Press Fit 6x2mm magnets

Pobrania
90
Polubienia
17
Ocena
0
P
PrintablesGlenn Brockett

Multiboard 1x1x3 bin

I needed a taller bin to hold pencils/pens. Thanks for the STEP file.

Pobrania
90
Polubienia
13
Ocena
0
P
PrintablesMewraz

Gridfinity 1x3x3 Olight i3T EOS

Gridfinity 1x3x3 Olight i3T EOS Laying down orientation for low drawers.

Pobrania
86
Polubienia
17
Ocena
5
P
Printablesertab

Gridfinity 1x3 cup tall with dividers

Gridfinity 1x3 cup tall with dividers

Pobrania
86
Polubienia
10
Ocena
5
P
PrintablesJoe Idoni

Gridfinity Bin 1x3x4 - Pred Label

A 1x3x4 Gridfinity bin with a slot for the pred label

Pobrania
85
Polubienia
5
Ocena
0
P
PrintablesTom Hofman

Gridfinity Desk Organizer System - Deskfinity - 1x3x6 Wallet Cards

A simple cut and merge of the original 2x2x6 Wallet Cards holder to fit a 1x3x6 space.

Pobrania
84
Polubienia
10
Ocena
5
P
Printablesartomweb

Sy's Peglock Gridfinity 1x3 with shorter back

I found that the dovetail on the back had an excessive height that blocked the holes above. This one has a shorter back. There is a support running between the two locking plates.

Pobrania
84
Polubienia
11
Ocena
5
P
Printablesgltovar

JB Weld Clear Weld, tubes, mixers, and dish holder. Gridfinity 1x3

1x3 Gridfinity storage for 2 JB Weld 4oz bottles, 2 1oz tubes, 2 types to stirrers, and an epoxy dish. I recommend using masking tape to cover the dish so you dont have to keep reprinting them. Pictured are the stackable mixers found here…

Pobrania
82
Polubienia
27
Ocena
0
P
PrintablesMarkuzzzi

YubiKey 5 NFC Holder for Gridfinity (1x1x3)

My first contribution to the gridfinity system: A holder for a YubiKey 5 NFC. The security token sits loose but securely in the holder so that it is easy to remove when it needs to be used. The holder is based on a standard 1w 1d 3h bin…

Pobrania
81
Polubienia
10
Ocena
0
P
PrintablesKaze fhgj

AnkerMake M5 1x3 Gridfinity Tool Kit

This is a 1x3 Gridfinity holder for all the parts of the AnkerMake M5 tool kit that is included with the printer. It also includes a 1/4in socket holder incase you have larger nozzles ie a Volcano style nozzle.

Pobrania
76
Polubienia
21
Ocena
0
P
PrintablesBodo

1x3 units, third height, 1x1 grid Stackable Insertbox

Stackable Insertbox 1x3 units in footprint, 1/3 height three of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-20 v2.2 initial public…

Pobrania
75
Polubienia
10
Ocena
0
P
PrintablesBodo

2x3 units, third height, 1x3 grid Stackable Insertbox

This is just one box of a bigger system with more than 160 variants in size and partition. Find the whole overview here. Stackable: three thirds/two halves make one full height All dimensions shown in the linked overview above compatible…

Pobrania
74
Polubienia
8
Ocena
0
P
PrintablesGreg

Gridfinity 2x1x3u 5x 65mm (~2.5") Bit Bin w/PFM Stackable

Gridfinity 2x1x3u bin with dividers for 5x 65mm (~2.5") bits with press fit magnet holes (PFM) This design fits 5x 65mm bits, is stackable, and has press fit magnets (PFM) It is recommended the outside corner magnet holes be used to limit…

Pobrania
73
Polubienia
17
Ocena
5
P
PrintablesJannik Kramer

Gridfinity Bin (1x3) for Dual Anker 521

Container for the Gridfinity system for two Anker 521 (PowerCore 5K) Can be printed without support Good results even with 0.3 mm layer height (Prusa i3 MK3S+) Fits the flat Ikea Alex drawers Not stackable Credits: Many thanks to Zack…

Pobrania
73
Polubienia
10
Ocena
0