Wyniki wyszukiwania: 20oz

Sortowanie

Liczymy pasujące modele…

P

Cordless Screwdriver Mixer Paddles For 20oz Solo Cup

I got sick of mixing epoxy resins and silicones by hand and decided to just make a much smaller version of the helical mixers that we use in the big gallon buckets. I also made sure to shape it with the exact internal dimensions of a 20oz…

Pobrania
587
Polubienia
78
Ocena
2
P
PrintablesMr_Neo

Sublimation Tumbler Alignment Clamp - 20oz Tumblers

This is an alignment clamp for attaching sublimation paper/stencils to 20oz sublimation tumbler blanks. To put the two clamp pieces together you need a single metric M5x10mm bolt and nut. The clamp has spaces for attaching rubber grips. I…

Pobrania
546
Polubienia
80
Ocena
0
P
PrintablesJuliusCaesar

20oz Yeti Rambler Handle

This handle was modelled after the official Yeti Rambler 20 oz Tumbler Handle from this link, YETI Rambler 20 oz Tumbler Handle | Sport Chek . It has a slightly loose fit so that users can add electrical tape to the inside of the rambler…

Pobrania
545
Polubienia
87
Ocena
4,56
P
PrintablesTackleberry

YETI 20oz Tumbler Reinforced Handle

The model is straightforward; print the handle upside-down, and the insert on its side. Use cyanoacrylate glue for the insert. This was originally designed by jasonalday on Thingi, and the insert design remixed by DanBuro on the same…

Pobrania
525
Polubienia
84
Ocena
4,8
P
Printableshikree

20oz Stanley Cup Boot

Best printed in TPU or the flexible filament of your choice, no supports needed.

Pobrania
276
Polubienia
63
Ocena
5
P
PrintablesCOMBAT_WOMBAT

20oz Milwaukee tumbler handle

20oz Milwaukee tumbler handle

Pobrania
201
Polubienia
23
Ocena
0
P
Printablescwcb08

yeti 20oz handle

modified to fit without tape, shortened the handle both directions about 1cm

Pobrania
127
Polubienia
24
Ocena
5
P
PrintablesRibeyeDundee

Yeti 20oz Tumbler Bumper

Printed in 95A shore hardness TPU 0.2 layer height print slow, the wall becomes very thin at the top slides onto the tumbler easily, but takes intention to remove it

Pobrania
115
Polubienia
17
Ocena
0
P
PrintablesWIESEMANN 1893

Tool Holder for Claw Hammer 20oz 035 I ENFORCE I for screws or peg board

Tool holder for 20oz claw hammers. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 119mm W - 45mm H - 48mm We design all…

Pobrania
106
Polubienia
17
Ocena
0
P
PrintablesTechplex

20oz Ozark Trail Insulated Tumbler - Handle

Have a cup, need a handle? Print instructions Inspired by jasonalday designs https://www.thingiverse.com/thing:2668183 Needed a handle that attached at the bottom to not obscure the grinch face on my mug. No glue or adhesive needed, the…

Pobrania
82
Polubienia
16
Ocena
5
P
PrintablesMomOfTwoGoalies

20oz/591mL Yeti Rambler Tumbler Handle

Reuploading this tumbler handle. Used PLA+, 0.4mm nozzle. With a fast print, it uses 26.5g filament and took about 1h12m. This handle is different than others listed due to the solid under side and long handle.

Pobrania
78
Polubienia
14
Ocena
0
P
PrintablesDJMac

Hydro Flask 20oz 16oz Handle

Here's an updated version of the Hydro Flask handle that's been reduced in size for the 20oz and 16oz versions that are ~74mm in diameter. Original version is on the left with the orange color Hydro Flask. This remix version (thinner…

Pobrania
78
Polubienia
19
Ocena
0
P
PrintablesDante

TPU Insert for 20oz Yeti Cup Handle

The 20oz Yeti Cup handle by Julius Caesar works great, but it was made slightly oversized for tape or felt on the inside. Here is a TPU insert made specifically for this handle at 100% scale. It would probably stay in place but I put a…

Pobrania
72
Polubienia
15
Ocena
5
P
Printablesgrumblegore

Yeti 20oz Rambler Tumbler Holder

Do you keep scanning your office in the morning looking for a coaster or some other surface upon which to place your 20oz Yeti rambler? If you're anything like me, your coasters keep getting pushed around into inconvenient locations and…

Pobrania
56
Polubienia
10
Ocena
0
P
PrintablesDave K

2013 Tacoma 20oz Bottle Holder

I'm a fan of Mountian Dew Zero, but when I got my 2013 Tacoma the 20oz bottles won't fit in the cup holder. This was one of my first practical 3D designs. I printed it out of PETG since it would need to handle the extreme heat in Las…

Pobrania
54
Polubienia
17
Ocena
0
P
Printablespatricio47smg

20oz Tumbler Jig By Patricio

Este é o STL para 20oz Tumbler Jig. Os tumblers que uso têm pouco menos de 81.5mm de diâmetro interno.

Pobrania
50
Polubienia
4
Ocena
0
P
PrintablesHi_Im_Dave

Protein Shaker Smoothie/Blender 20oz Cup Handle.

Fits every 20oz blender cup I own, even pint glasses well. -Cheers-

Pobrania
49
Polubienia
5
Ocena
0
P
Printables3D-Academy

Cup&Cino Becherhalter / Paper Cupholder 20oz - 590ml /12oz - 300ml /4oz - 120ml

Cup&Cino Becherhalter Paper Cupholder 20oz - 590ml 12oz - 300ml 4oz - 120ml

Pobrania
45
Polubienia
6
Ocena
0
P
PrintablesJosh

20oz yeti tumbler handle

Simple handle. Does not cover personalized text from yeti.

Pobrania
44
Polubienia
12
Ocena
0
P
PrintablesTim

Bare bones Yeti tumbler drying rack (20oz)

drying rack for 20oz Yeti/Ozark/Rtic tumbler

Pobrania
39
Polubienia
6
Ocena
0
P
Printableskitlaan

Yeti 20oz Tumbler Holder (23mm clip opening)

This is a holder for the Yeti Rambler 20oz Tumbler. The mounting clip is designed for a board thickness of 23mm. Printing Tips I used white PLA, 0.4mm nozzle, 0.2mm layers Ring: Print top surface on-plate if you prefer that surface finish…

Pobrania
38
Polubienia
7
Ocena
0
P
PrintablesMike D

Yeti 20oz WITH handle / Rambler 26oz cup holder

Material: PETG Layer Height: 0.2mm Infill: 15%, adaptive cube suggested Perimeters: 3 or more Supports: Everywhere (generates in drain holes but may generate on plate for support) Also checkout the 12oz can adaptor for this model.

Pobrania
36
Polubienia
1
Ocena
0
P
PrintablesTFro3

Stanley 16oz/20oz Trigger-Action Travel Mug AirTag Boot (TPU)

In the midst of your (or your loved one's) busy life find misplacing the 16oz (or 20oz) Stanley trigger action travel mug an issue? Consider those days a thing of the past with this boot which holds an AirTag for easy retrieval when you…

Pobrania
34
Polubienia
7
Ocena
0
P
PrintablesDownwritemad

Rivian 20oz Zojirushi Thermos/Aluminum Can Holder

The Zojirushi fits in the cup holders, but it jiggles around quite a bit, so I adapted the KJames design to fit the diameter of the Zojirushi. Also perfectly fits an aluminum can.

Pobrania
33
Polubienia
6
Ocena
0
P
PrintablesDieselJesus69

Peterbilt Cupholder spacer for 20oz bottles

This is a cupholder spacer I made for the Peterbilt 520. It allows you to keep your soda can from bouncing around in the oversized cupholders that the petes come with. Drivers were using rags or napkins as spacers and still ended up…

Pobrania
31
Polubienia
0
Ocena
0
P
PrintablesRchildr1

Yeti 20oz Handle

I customized the original Yeti 20oz handle created by @ktjennin with a set of cross cannons on one side and the text “DRINK WATER” on the other. Thanks to @ktjennin for creating the original model as all I added to the design was some…

Pobrania
28
Polubienia
7
Ocena
0
P
Printablestheonepete

Gasket for 20oz Yeti Cup

This is a remix. The gasket is printed from Amazon TPU. The lid with this gasket fits really snug and it will not fall off. I do not recommend putting the lid or the gasket through the dishwasher. My lid is printed from Amazon PETG. I hit…

Pobrania
27
Polubienia
3
Ocena
0
P
PrintablesHandsomeGreg

Track Mount Vertical 20oz Yeti holder

Using https://www.thingiverse.com/thing:4981649 This is a track mountable vertical cup holder for a 20oz Yeti Rambler. I needed a cup holder for the inside of my e-bike crate. There is no reason it couldn't work in a kayak crate, wall, or…

Pobrania
27
Polubienia
10
Ocena
0
P
PrintablesMike D

12oz. can adaptor for Yeti 20oz. holder WITHOUT handle

For use with: Yeti 20oz. Cup Holder(no handle)

Pobrania
24
Polubienia
1
Ocena
0
P
Printablesmigueljgim
Pobrania
22
Polubienia
1
Ocena
0
P
PrintablesSteveS42

Styrofoam Cup Holder (20oz)

Not everybody has hands big enough or strong enough to hold a full cup. I designed this holder to add a handle and make it more like a mug for easier handling. Printing Easy print using any material. Needs no support. The only special…

Pobrania
19
Polubienia
2
Ocena
5
P
PrintablesLabyrinth Dice

Cup Organizer (20oz, 10oz, 1oz plastic cups)

This organizer fits 20oz, 10oz, and 1oz, plastic cups. The measurements are made from my own cups on hand so your mileage may vary.

Pobrania
19
Polubienia
3
Ocena
0
P
PrintablesMike D

12oz can adaptor for Yeti 20oz WITH handle cup holder

Material: PETG Layer Height: 0.2mm Infill: 15%, adaptive cube suggested Perimeters: 3 or more Supports: Everywhere For use with Yeti 20oz with handle cup holder .

Pobrania
18
Polubienia
2
Ocena
0
P
PrintablesBrian

Yeti Rambler 20oz. Screw Top Cover

I was gifted a 20oz. Yeti Rambler (Dick's) and none of the accessory lids fit. This is cover goes on top of the screw top lid and makes more "leak resistant". I can't claim complete leak proof. Bonus is the cap makes it ALOT easier to…

Pobrania
10
Polubienia
1
Ocena
5
P
PrintablesSteveS42

Culver's Cup Holder (20oz)

Not everybody has hands big enough or strong enough to hold a full cup. I designed this holder to add a handle and make it more like a mug for easier handling. Printing Easy print using any material. Needs no support. The only special…

Pobrania
6
Polubienia
2
Ocena
0
P
PrintablesUsman Suriono

Clamp for Crock-Pot 20oz Portable Electric Food Warmer

I keep the pot warmer in my office and only bring the pot to work because it's too bulky to bring them all. This clamp is designed to keep the lid securely fastened when the pot is filled to its maximum capacity. It solves the common…

Pobrania
6
Polubienia
2
Ocena
0
P
PrintablesTimothy Cox

Tippmann 20oz CO2 bottle wall mount

I wanted an easy way to mount my co2 bottle in my aquarium cabinet. So I designed a center bracket for the two hooks i resized to fit a Tippmann 20 oz CO2 bottle. I used 4 3mm x 16mm screws and nuts to attach the hooks to the bracket and…

Pobrania
5
Polubienia
1
Ocena
0
P
Printablesfuzzymakes

Yeti Dust / Debris Cover 20oz Tumbler

Yeti Dust / Debris Cover Are you tired of working on your tractor all day, just to see a layer of dust on the top of your Yeti mug? Then the Yeti cover is for you! Have you ever been out fishing, and had lake water splash on top of your…

Pobrania
4
Polubienia
2
Ocena
0
P
Printables

Tippmann 20oz CO2 bottle wall mount

I wanted an easy way to mount my co2 bottle in my aquarium cabinet. So I designed a center bracket for the two hooks i resized to fit a Tippmann 20 oz CO2 bottle. I used 4 3mm x 16mm screws and nuts to attach the hooks to the bracket and…

P
Printables

Yeti Dust / Debris Cover 20oz Tumbler

Yeti Dust / Debris Cover Are you tired of working on your tractor all day, just to see a layer of dust on the top of your Yeti mug? Then the Yeti cover is for you! Have you ever been out fishing, and had lake water splash on top of your…

P
Printables

Clamp for Crock-Pot 20oz Portable Electric Food Warmer

I keep the pot warmer in my office and only bring the pot to work because it's too bulky to bring them all. This clamp is designed to keep the lid securely fastened when the pot is filled to its maximum capacity. It solves the common…

P
Printables

20oz Milwaukee tumbler handle

20oz Milwaukee tumbler handle

P
Printables

12oz. can adaptor for Yeti 20oz. holder WITHOUT handle

For use with: Yeti 20oz. Cup Holder(no handle)

P
Printables

12oz can adaptor for Yeti 20oz WITH handle cup holder

Material: PETG Layer Height: 0.2mm Infill: 15%, adaptive cube suggested Perimeters: 3 or more Supports: Everywhere For use with Yeti 20oz with handle cup holder .

P
PrintablesGrotto Design

Stanley IceFlow Flip Straw Tumbler 20oz HANDLE

Elevate your Stanley IceFlow Flip Straw Tumbler 20oz with our custom handle! Designed for function and convenience, this handle will help your little one hang on to their favorite delicious beverage. We know that it will be dropped at…

Polubienia
1
Ocena
0
P
Printables

Funnel Fitting 16 or 20oz Poland Spring Bottle

This was a funnel I developed to use with a bottle of water and need a shaker to mix the protein. It was intended to use when I was on the go when I didn't have or trust a water source and did not want to carry around a bulky shaker that…

P
Printables

YETI 20oz Wall Mount Lid Dispenser

Mount it in your cupboard or on the wall in the kitchen to keep your lids neat. No supports needed if printed with the wall mounting face pointed down Designed by brother in law, uploaded on his behalf.