Liczymy pasujące modele…
Printed in PETG with 40% infill and supports. In meinem Profil ist ein passender Messuhrhalter zu finden. In my profile you can find a suitable dial gauge holder.
////////////////////////////////////////////////// SD-, MicroSD-/USB-holder for ::: Benq #Zowie #XL2546 #Monitor #Ledge https://www.printables.com/model/215189-monitor-ledge-benq-zowie-xl-2546-modular…
This model is compatible with the lego system.
A 5x2 Gridfinity tray for the Iwiss SN-2549 crimping tool. Probably also fits: SN-28B SN-58B SN-025 SN-01BM as these seem to use the same chassis. Versions available: Half-height (3u) - the tool sits about 3mm proud of the top of the tray…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Die Maße der einlegeplatte (Siebdruck multiplex) sind B=149mm/L=543mm/H=15mm. Zur befestigung habe ich einfach passende Blechschrauben benutzt. Die 149mm Teile mit Clip und Anschlag sind für die Standard langen Auszugsstangen am Tisch in…
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a positioner for the IWISS SN-2549 crimp tool for Molex SL contacts (male and female). The positioner is secured to the tool using a 20mm M4 screw and nut. Replace the existing screw with the new screw while the jaws are closed to…
This model is compatible with the lego system.
Zero Clearance insert for Metabo KGS 254m You need both part 1 and 2 plus 2x 5x20 mm sylinders to mount. Use original screws to mount
This model is compatible with the lego system.
Miter bar for Metabo TS 254 table saw. Tight fit. Made room for 2 M6 bolts. Sketchup file attached.
This model is compatible with the lego system.
This model is compatible with the lego system.
Use the Hart Stack System to bring your Gridfinity bins on the go! These toolbox organizers stack and lock together for easy portability, and they just so happened to fit the Gridfinity dimensions very well, parts don't even spill out…
This 3D printable T-track slide is specifically designed to fit the Bosch GTS 254 table saw, allowing you to build your own custom jigs—such as cross-cut sleds or other precision guides—without relying on metal tracks. Whether you're…
Same model but in one piece, for larger build plates.
2.5'' SSD/HDD insert for serves like the Fujitsu Primergy rx2540
This is upgrade part for Metabo TS 254M table saw for original miter gauge. Since miter gauge has loose fit and original plastic are not doing their job as they should, I designed replacement part. Since on my miter gauge holes for screws…
Adapter to convert the Metabo KGS254M Miter Saw dust extraction port to camlock, for use with Peter H's Camlock connector Kudos to Peter for providing design dimensions and helping me out. Printed in Prusa Basic White PLA with 0.2mm layer…
This model is compatible with the lego system.
Kompatibelk mit Vielen Geräten die Teile habe ich mit einem 4mm Messingstab verbunden (eingepresst, Alternativ kann auch eine dünne schraube etc. verwendet werden, Die verbindungs Löcher müssen eventuell nochmal nachgebohrt werden. Zur…
Print it using a heat resistant material. Orient the print so it is on the side, NOT laying flat on the build plate. Use supports. Use 0.10 mm setting.
Gedruckt in PETG. 4 außenwände 30% infill 0,2mm Layerhöhe. Ich habe das Glück dass ich einen Drucker mit einer 350x350 Druckplatte habe und konnte das Teil am Stück drucken. Ich habe aber eine version erstellt die in 2 Teilen gedruckt und…
Tire 24mm D. x 7mm Offset Tread - Band Around Center of Tread : Part 61254 | BrickLink Printed in TPU/FLEX
This model is compatible with the lego system.
I remixed with only one hole and 30mm of lenght and adapted to my Table Saw TC-TS 254 of Einhell. I used also another model https://www.printables.com/it/model/317480-featherboard-for-parkside-tablesaw/files for featherboard. Now all is…
This model is compatible with the lego system.
The Metabo TS 254M is a really good budget table saw, when ignoring the wobbly fence which requires alot of time to get to lock at 90 degree's relative to the saw blade. So I designed a new wider fence lock that is mounted as an addon to…
Führungsschiene 30cm lang für Metabo TS254M mit Einlegeplatte
Printed with Sovol SV01 PRO Print Config: Top.Bottom thickness: 1mm Bottom pattern initial layer: Concentric intial layer flow: 120% initial layer line width: 110% initial layer speed: 20 mm/s Before printing make sure to reajust Y axis…
This model is compatible with the lego system.
Similar to the other model I uploaded, this is a positioner for the IWISS SN-2549 crimp tool for JST SM contacts (male and female). The positioner is secured to the tool using a 20mm M4 screw and nut (I recommend a thumb nut for tool-less…
I bought a new jigsaw from the Milwaukee M12 FJS brand. Since I want to make an adapter for the guide rail in the future, so I made my own version of the plastic cover for the jigsaw foot from scratch. Recommended material: PET-G Edit:…
Zero clearance insert for Metabo table saw TS 254 M. Designed that riving knife has a hole already in place, and blade have to cut it through. The gap that is in place OF BLADE, serve to force slicer to make walls where the blade cuts…
This model is compatible with the lego system.
Dieser Adapter wird benötigt, um die Monacor DT-254 an das Monacor WG-300 anzuschließen. Der Adapter / die Druckdatei ist bereits so ausgerichtet, dass ohne Supports gedruckt werden kann. Lautsprecher, für die dieser Adapter benötigt…
This model is compatible with the lego system.
Metabo TS 254 / TS 254 M miter slot runner featherboard I’ve also designed Metabo TS 254 / TS 254 M rip fence featherboard add-on ; you can find them here . The 'feathers' on the featherboard are slightly recessed on the underside, marked…
I needed to learn my Metabo KGS 254 miter saw how to connect saw dust extractor using a DeWalt Airlock adpater. That's why I created this reduction.
Created with the Fusion Gridfinity Generator plugin.
This is designed to fit my Kobra 2 Pro diagonal, which brings it to 290mm. 12x7mm to fit the Miterslot with space underneath for good sliding capabilities. 3,6mm Countersunk Holes for small 3,5mm Screws. Printed in White Meta PLA from…
Lenkrad-Abdeckkappe, -Deckel, -Kappe als Ersatzteil für das Lenkrad eines Atlas Weyhausen Radladers der C, D und ggf. E-Serie. Original-Ersatzteilnummer: 0344254 Getestet an einem Atlas Weyhausen Radlader 72C (Baujahr 1993).…
Printed it in PETG with 80% infill, because the zero clearance slit you saw into it yourself. No supports needed.
By adding 2 female 4mm diameter fastons you can create replacement of original connector.
English A simple wall mount for my YT-Industries Decoy ebike charger. Model: BC222360040 Should be equivalent to the MDA254 (www.mdacharger.com). Use two 4.0 or 4.5 mm countersunk bolts for mounting. Deutsch Eine einfach Wandhalterung für…
Nozzle: 0.4mm Layer height: 0.2mm Support: Yes (only bottom part) Best results with 0.25mm nozzle and 0.15mm layer height
A T-slot insert making compatible models like https://www.printables.com/model/108962-featherboard-for-table-saw with METABO TS 254M Designed to be used with M6 screw
Over the last few years, the original attachments all broke in the same place, the small tab securing them to the clipper. I was not abel to source any replacement parts online, so modelled a set base on the original. They may fit others…
verbindet dein Absaugsystem mit der Metabo TS254M Tischkreissäge verschiedene größen verfügbar. Festool kompatibel osVAC Neo kompatibel 32mm, 35mm, 38mm Schlauch kompatibel auf Anfrage erstelle ich auch gerne noch weitere Adpater für…
This is a wall mount to attach the VM5254 Baby Monitor to a wall using Wall Screws and one M4 Nut and Bolt. My second hand baby monitor didn't come with the mount.
Add-on to mount a featherboard to the fence of an Metabo TS254 / TS254M Tablesaw This add-on fits the original rip fence of the Metabo TS 254 table saw. Parts list: - 2 x Square-Neck Carriage Bolts M6 x 30 - 2 x hex head bolts M6 x…
Lower Front suspension arm for Tamiya DT-03 Chassis. There is an arrow that indicates the mounting direction. The holes have to be smoothed with a 3mm drill or better with a 3mm reamer. Tamiya E-Teile (Querlenker oben) DT-02 / DT-03…
A connector to connect a 38mm hoose to a 50mm hose or dust extractor. Originally esigned for use with Metabo TS 254 M table saw and Ozito shopvac, but it will probably work on many tools and vacs TPU is ideal because it allows you to…
This model is compatible with the lego system.
This mounting plate lets you use a Dewalt DWP611 router with a Craftsman 25444 router table. The mounting plate is 1/4 inch thick. Same as the base plate that comes with the router. To mount the plate to the router table I used M4-20…
Support HikVision DS-2CD2543G0-IWS
This is inspired by others but designed from scratch. Objective was to make a frame to hold 5 x raspbery pi, two of which have 2.5in SSD storage and all powered by a POE switch. I used 10in as a size since there are commercial mini racks…
This is an adaptor to connect the Metabo SPA 1200 dust extractor to the KGS 254 M Miter Saw Category: DIY
Ersatzteil (Verschleißteil) für das Kunststoffklemmteil am Metabo TS254 (M) Parallelanschlag. am besten auf einer Glatten Oberfläche drucken. nach dem austausch lässt sich der Parallelanschlag wieder vernünftig spannen.
This file contains the threaded insert that is used to adjust the extender leg terminator. It is necessary to insert an M6 screw inside to ensure the sturdiness
Figured I should share this in case it might help someone. Fitment was tested on an SA254M2 cannot guarantee fitment with other models. This model was printed in PLA+ on a Creality Ender 3 Pro. Supports: ON Infill: 100% Adhesion: NONE…
Wall holder - knob to organize tools
A replacement for the pinch roller arms in a JVC TD-W354 dual cassette deck.
Vacuum adapter for Metabo KG254M mitersaw to Bosch AdvanceVac 20 vacuumcleaner.
Changed magnet size to 8x3 because that's what I had.
This adapter allow you to use the Monacore WG-300 on the Monacore DT-254 . Wrong version? This is for the newer (plugged) version of the DT-254. If you need an adapter for the older (three torx screws) version you can use this STL…
Náhradní díl pro úhlový doraz stolní okružní pily METABO TS254M
rotating organizer 254x254x12
A mi hermano se le rompió la base de una pata de su trípode Neewer y pues tras unos minutos de diseño está lista, además me recordé que hay un concurso sobre partes de reparación de objetos y pues lo comparto de una vez (a pocas horas de…
Hose 4" magnetic adapter for table saw Bosch GTS 254 with two magnets size 20x10mm
////////////////////////////////////////////////// Benq #Zowie #XL2546 #Monitor #Ledge Addon:: SD-Card / USB-Stick Holder for [[Benq #Zowie #XL2546 #Monitor #Ledge]]…
The spike on my plant climber rotted away and broke. So I designed this replacement spike. It was designed to fit the plant climber “Rankstab Kokos 80 cm” of the German hardware store brand Toom. It runs under the article number 4254800.…
I used measurements from a damaged OEM part to create this printable version. I iterated through a few printed versions until I got one that worked well enough for my purposes. It's a bit finicky in that you can crack the screw posts if…
Very simple clip to hold a metal tube to a soldering iron for fume extraction. Category: Electronics
vacuum cleaner connection for 45 mm hose
ZCI for AEG mitre saw Will likely be too big for you printer - use the Cut tool in Orca slicer to cut in half, I used two ‘dowel’ connectors to provide pockets for 2mm metal pins that I had lying around, use what you like though. See…
Materiale pa66+cf20 riempimento al 100% in alternativa qualsiasi nylon con fibra di carbonio, per le altre impostazioni di stampa fare riferimento al tipo di filamento utilizzato.
holder for Neje 25410 10watt but may fit other lasers
This model is an add-on cover for the Anker model A2544 2-in-1 MagGo charging stand to hold and properly align an Apple AirPods Pro 2 charging case with the base of the charging stand. The main cover can be printed upside-down without…
Stand For 254x610x18mm Shelf Board Works Longer or Shorter Shelf Board as well as long as its 254mm wide The stand is 18mm wide so it matches the thickness of 18mm shelf board. But it should also work with thinner/thicker shelf boards.…
ORGANIZZATORE GT254 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
Spare part of the front bumper for the FTX Vantage 2.0 RC car (ref: FTX6254). I recommend to print this part in ASA filament.
Craftsman 137.212540 Fence 27NH Fence 082g Mitersaw sliding fence parts direct called it an 082g fence , and google called it s 27nh fence. The model is accurate, not sure which site screwed up the part number or if they use the same…
Adapter to convert the Dexter DX216/DX254 Miter Saw dust extraction port to camlock. Can fit other models as well. This type of miter saw is sold under different brand names. Size : Inside : 43mm Outside : 45mm Printed in ABS with Voron…
A large swirled, fluted vessel - equally at home as a fruit bowl, key/catch-all tray, or a standalone decorative piece. The twisted scalloped walls catch light beautifully, especially in silk filament. Big footprint: 254 mm wide × 63 mm…
This is a Cap for your Ugreen 100W CD254 Charger. It helps to Protect the plug part.
Plate for a Delta band saw 28-254
remix @futurexprint_2542268 FutureXPrint | Printables.com
Um an den Staubabsaugstutzen der Metabo TS 254 (55mm) einen Absaugschlauch mit Innendurchmesser 52mm bzw. 98mm anzubringen. Der dritte Adapter dient dazu, einen 55er Schlauch an die 100er Absaugung zu bringen. Gedruckt mit Prusament PETG,…
Remix of https://www.printables.com/model/175178-magnetic-case-for-apple-tv-4k-remote with 10x2mm magnets
Benq - Monitor - XL2546 - USB-HUB Mount ////////////////////////////////////////////////////////////////////////// Its for:: RSHTECH USB Hub Active 3.0 with 36W (12V / 3A) power supply, aluminum 10 ports USB 3.0 hub for charging and data…
Handy hook that attaches to the bar and allows carrying the chainsaw on the bagpack/belt – pretty well secured. I use it together with my bike bagpack when exploring and cleaning local trails. The hook is at the center of gravity and the…
Hi. I've designed a holder for my newly bought Werckmann utility knife. You can find this knife in Action store or buy it online. The holster was designed to hold the knife quite tight. It won't fall off even if flipped upside down. I've…
no screws needed disk caddy - I lost my caddies - so i printed new ones - the thickness is 2.5mm
Funnel for replacement APHA 2540 C/D method (TDS and TSS)
![SD-, MicroSD-/USB-holder [FOR] Monitor Ledge - Benq-Zowie XL 2546](https://media.printables.com/media/prints/240927/images/2175804_b88fd8aa-daf1-4246-a3c4-fa11612b5529/2022-07-12-19_39_12-autodesk-fusion-360-personal-.jpg)
