455 modeli
NIRSI HS-02A Soldering Iron Stand This is a compact desktop stand designed specifically for the FNIRSI HS-02A soldering iron . I designed this model from scratch, taking inspiration from the excellent work by jabdoa_4397802 : Gridfinity…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Design : I design the part in Fusion 360 similar to the original part of my NECCHI Q132A sewing machine. There are 2 things to be considered that are key fort a correct installation and fitting. The bottom part must fit the 6mm square…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
After print, remove suports and put turret int the hull. Model is for printing, some parts of the tank are not there (like machine guns on the hull, drivers periscope, etc.). If there are any problems, please send me a message.
Wydruk około 3,79 €–4,63 € nettoWstępna wycena jednego wariantu
Wanted a box to store the foot-pedal of our NECCHI Q132A sewing machine. I found one here https://makerworld.com/en/models/121716-footpedal-box-for-singer-heavy-duty#profileId-130981 but wanted to have one with different size and a door…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu
Mopar 55196762AA, Jeep Grand Cherokee WJ 1999-2004 fuse puller tool. Modelled according to OEM. Stores inside and underhood fuse box lid storage. Tested working even when printed with 0.6 nozzle. If the fuse has stayed in place for 2+…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Compatible avec toute radio de protocole AFHDS 2A
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
A hand tool for assembling and disassembling Amphenol Nexus U-92A/U (aka: M9177/3-1 or TJ-102) connectors, which are commonly used in civil helicopter intercom audio systems. User Instructions: To use this tool, simply insert the post…
Wydruk około 0,48 €–0,58 € nettoWstępna wycena jednego wariantu
A quick and seemingly lasting fix to prevent the back shield wiper of a persumed Peugoet 206 first generation from around 2010 from hanging down due to an cracked or worn out mount. Fully replaces the original mount and its cover , while…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Da das Inrico T522 manchmal recht wackelig ist habe ich mir diesen einfache Stand konstruiert. Es wird in die beiden Führung geschoben. Um es einfach zu halten wird an der Schlaufe ein Haushaltsgummi befestigt und einfach nur über den…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
NOTE: Check out v3 at: Leopard 2A7 Tank - Kit Card v3 by Crea_Hicks - MakerWorld OR: Leopard 2A7 v3 - Kit Card by Crea_Hicks | Download free STL model | Printables.com Introducing the Leopard 2A7V Kitcard v2. Print In Place, easy to…
Version 2 of the Airwolf model. This model is based on the basic design by Hans Meyer at Grabcad, remixed, STL's fixed, updated, missing parts added. The front fuselage needs to be printed heavier (30% infill) as opposed to the rear parts…
This is a remix of https://www.thingiverse.com/thing:4718232 Supplies: Superglue Blue Tape (optional) Printing Instructions: Use 0.1mm layer height for best results Use the .3mf file with custom supports or use build plate supports…
A box I remixed for my multimeter. The lightning bolt was just a random .SVG I found and put in bambuslicer. Will require 6x M3x20mm screws for the hinges and latches. I super glued the insert in so it stays in place. I printed mine out…
This is my model of a Sterling SMG MK4 (L2A3). Not only was it a real world weapon, but it served as the basis for the E11 blaster carried by stormtroopers in Star Wars. All parts were modeled to measurements taken from an actual Sterling…
Leopard 2A5 Tank Model A detailed 3D model of the Leopard 2A5 tank. The turret can rotate, and the parts must be glued together. Scale 1:72
Leopard 2A4 Tank Model Scale 1:72 The turret is designed to rotate using a bearing mechanism, adding functionality to the display. Assembly requires gluing the parts together for a secure fit. The model includes separate black tracks.
An easy to print, fast to assemble Leopard 2A7 v3 Kit Card ORIGINAL: Leopard 2A7 Tank - Kit Card v3 by Crea_Hicks - MakerWorld v2: Leopard 2A7 Tank Kit Card v2 by Crea_Hicks - MakerWorld The Improvements that were made include:…
I wanted to be able to charge my Bosch Powerpack 500 battery in my car when I'm on trips. Unfortunately the standard 4A Bosch charger pulls 170Watts which is more than my car's AC Inverter can support. I also tried to use my 300Watt Pure…
This is a scale model of a type 3202A NMBS flat freight wagon. These models were build between 1966 and 1967. This is the version with the break. Couplings go in the NEM shaft that is included in the model. A slap of lead in the bottom…
Updated: 2020-03-07 Re-Uploaded in a better format with gcode. This is a second version of the Rocinante model from the TV show "The Expanse". It has better gun-wells, better landing thrusters, and a much taller stand. Print instructions…
README: All stls are already in the correct print orientation. Motor: Any 29 series Samsung microwave blower- DE31-00029H, DE31-00029K, DE31-00029J, etc etc You can find these for decent prices on ebay. If you want to have the more common…
The B-2 Spirit is a stealth bomber developed by Northrop Grumman. The first operational B-2 would be named the Spirit of Missouri, as all B-2 aircraft would follow the same naming scheme of Spirit of “Insert U.S. State”. Production of the…
This time with cutouts to see the Glyphs
…Please be sure to hit like & post a make, I'd love to see your prints! Add a highly accurate M12 LJ12A3-4-Z/AX inductive probe to your SV08! This probe is a NPN NC probe. This means it is normally closed & will provide a “low” signal…
A Rugged Box with the matching insert for a Fnirsi HS-02A Soldering Iron and all the included accesories. I had to change the shape of the holder for the power supply from the original Makita insert , as mine was different. So you might…
Accurate S&T Sterling L2A1 AEG replica Accurate 1943 M38 scope replica Accurate small eagle Hengstler replica Accurate SDS power cylinders replica Accurate Element Airsoft M300A Mini Scout Light replica Functional features include: Moving…
I couldn't find a wall mount for the batteries of the Bosch GSR 12V, so I made one. It can be fixed to the wall with two 40mm screws. The holder is slightly tilted for convenience. Update 2023-11-12: Added a non-branded version
Update added STEP file tested with WE g17 gen 3 // we mag tm guarder slide with we nozzle // we mag no longer work with real one Video read before print its had 2 version 1. short frame on left side you need to cut metal peace 2.long…
Simple stand for the HS-02A/B from Fnirsi. New design but based on this: https://www.printables.com/model/585253-improved-hs-01-stand Like the original, prints without supports. ASA or ABS recommended. I only have a HS-02A, so not tested…
Compact wall mount for Bosch ebike battery charger 2A BPC3200 with holder for both plugs and routing of the power cable on the rear side. Due to the edge on the underside, the print is made at an angle, which leads to better layer guidance.
This is a slightly tweaked profile for use with Sainsmart's 92A TPU. This filament needs lower temperatures which is the primary difference. I found this to have better results than the manufacturer settings.
Opening Tool - Smartphone - Notebook - Laptop - Automotive REV.2A Resize to adjust dimension 06/11/2026 Added Rev.2A 10/10/2024 Added Rev.2 23/04/2024 Added Rev.1 All our designs are free to download and use. Your support fuels our…
1602A / I2C LCD Display Module - 16 X 2 Text LCD - I2C CTRL Adaptor included Buy from Amazon here!
Test samples according to the ISO 527. 2A is slighty larger and 2B shorter
Made a print in place tank almost looking like a Leopard 2A6 for the little one. Not a good decision, now I have to print a whole battalion of these. LOL. The tank is printable without supports (a support block for the barrel is…
CLICK HERE If you're looking for 12ga storage trays for a standard M19A1 .30 cal ammo can! CLICK HERE If you're looking for 12ga storage trays for a Cabela's Dry-Storage Ammo Box! Some manufacturers sell their shells in boxes that are so…
I had an old, slow laptop that had not been used for years. I repurposed the screen, using an external controller board, designed and printed a case for the controller board and ‘feet’ for the monitor brackets. The controller board is…
u might have to glue the turret mg in sadly:(
I printed it with my Anycubic Kobra GO with black PLA. Next month I will upload a version of the leopard2a7 with less details. There are two versions. The version “leopard2a7cut” is diveded into two pieces so that you can print it larger…
::UPDATE:: Tweaked the axles (wheel pins) - hopefully they will not break as easily and the wheels still go on without issue A print in place Akira inspired bike (Shotaro Kaneda's bike) with articulable steering, and utilizes two 625z…
This model is compatible with the lego system.
F3d file included so you can adjust for the pitch of your pegboard holes... if you need to test the gauge, print the first 7mm to get a test strip. Prints without supports (FF Adventurer3 - 0.3mm layer height) - just print it with the…
Edit: 3/27: Newer version added for better air seal. Japanese gas blowback airsoft guns require use of duster gas, or HFC152a, for lower pressure. Adapters are hard to find, so make your own! Works for Inland and Dust-off brand canisters.…
Remix of @DrCox_1746174's Nothing Phone 2a Case. Added additional cutouts and indents to mimic the original design of the phone. Also added cutouts around the volume and power buttons for easier access. Printed in Glow in the Dark PLA.
If you are printing and building my Sterling or ANH E-11 model found here: https://www.printables.com/model/162480-sterling-smg-mk4-l2a3-and-anh-e-11-conversion But you want a version that can take some rough handling, then this is the…
Recently purchased a FNIRSI HS-02A and wanted a way to store all 6 included tips in the included carrying case. I'd recommend turning on “avoid crossing perimeters” in your slicer to keep any stringing out of the holes as the tolerance…
Junction box for Reolink RLC 810A, 1212A etc.
6S balance clip to prevent balance connector to move. it holds firmly attached to the lipo battery. Easy to print in TPU. Infill dont really matter the object is completly full because it mostly only perimeters. Post your makes! 4S…
This is a snap fit case to build a USB power bank using a soldering iron and the required parts (sourced from Aliexpress). A off-the-shelf battery holder is used to make it easy to build. You can easily make your own battery holder if you…
Powerbank built on STEP UP 5V 2A Li-ion USB-C and 2x lion 18650 3.6V batteries and with LEDs indicating the level of charge on the side of the case. needed: - STEP UP 5V 2A Li-ion USB-C https://pl.aliexpress.com/item/1005003104542176.html…
This model is compatible with the lego system.
Fnirsi HS-02a Soldering Iron Storage Insert for Makita MAKPAC Mini Size 1
Printed with 0.2 LH no Supports
Simple yet functional replica of Hisense 32A series Stand Unit. !! Check the PDF drawing if dimensions match !! There is a small letter L or R in the same spot as in original feet. Can be printed from any material, but preferably with…
The ultimate Leopard 1, the C2A1 mexas was deployed to Afghanistan in 2006. Based on the Leopard 1a5, the C2 bolted on a bunch of composite armour panels and went to war. Category: Vehicles
This model is compatible with the lego system.
I've uploaded a v2 model which can be printed on larger bed printers ( 1308198-zx-spectrum-2ab-replacement-case-v2 ) Replacement case for the ZX Spectrum +2A/B (Amstrad black model). Case is narrower than the original due to the tape…
2D version of the Austrian tank Leopard 2A4
I printed it with AzureFilm TPU 85A 0.2 layer height 0.4 nozzle Added some modifiers to the bottom of the case in slicer so the honeycomb infill is visible
This model is compatible with the lego system.
Simple insert for a M2A1 ammo can to give a flat bottom. Also provides a bit of a "basement" area should something leak
This model is compatible with the lego system.
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the Ukrainian Leopard 2A6 unit…
I love the bike design, but I wanted to print bigger, so I designed my own wheels. Used Concentric patern for the first an top layer, color change for the stripe. Tires are from TPU. I tried make better (stronger) wheel pins, because when…
Case with mounting holes for jl-12a300 or XL4016. It's a 300W stepdown DC converter. Print top cover upside down, PLA may have too low heat resistance, ABS and other would be better. Module is mounted on 4 plastic elementnts inside, you…
I created this wall mount for hanging a Bosch E-Bike Charger (2A) onto the electrical mounting panel in a Biohort garden shed. The wall mount can be just inserted into the parallel slotted holes. The charger then can just be slid into the…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the Canadian Leopard 2a6 unit…
The allows you to connect a vacuum hose with a 35-37mm inside diameter to the dust port of the Bosch PEX AE 12 orbital sander. This replaces the cloth bag that came with the sander. I am using it with a hose joiner from a Triton saw…
https://makerscontracovid.net.br/ This prototype was made to fit the requirements made by the team from HC in São Paulo after the Makers Contra a Covid-19 shows RC2, RC3 and Brasil V2 to them. We remix RC3 to cover the face, 5 cm more of…
Parkside X12V 5Ah 2,5Ah 2Ah - 4x battery holder
This is my third model on Printables, so I would be very happy to hear what you think of it. Constructive feedback and suggestions are always welcome! Print the holder with the screw hole (the small one) flat on the bed, you will not need…
This is a remix of the bollio's original model on thingiverse . I have added some cutouts to improve airflow. The original auther stated that this baffle was for the Mellanox ConnectX-3 CX312A. But I have a CX322A, and it works just fine.…
BIC Lighter Sleeve Cover Studio 2A - Cover accendino BIC Easy to print, optimized filament usage Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the…
American M2A1 Anti Personnel mine for reenactment display Category: Props
This model is compatible with the lego system.
Habe die Clips für die Nummernschildbefestigung des Thule Fahrradträgers verloren. (Ersatzteilenummer 51378 von Thule Clip 2A + 2B passend) Vielen Dank an @vaterderhuehner für die Arbeit. Ich habe die Clips auf mein Modell angepasst.…
This model is compatible with the lego system.
box for arduino 1602 and 1602-A screen
A simplified model of a IP5306 5V 2A powerbank module for use in your projects
I liked the 'Simple Universal Phone Stand Version 2' by JobPrinter, but saw some feedback that it had marked the back of someone's phone case. I did a minor modification to add an arc to the top of the stand, which should soften the…
No supports, 0.2 resolution (on 0.4mm nozzle) printed with PLA. Print time +- 1 hour As the original creator stated, it's great if you need a quick case. Phone is holding very well in it. Be aware, 2A model has this center placed camera…
Simple rain cover design to be attached with a (4-5mm wide) ziptie to the camera. It keeps the microphone hole in the casing free. Print in any material, but recommend PETG 0.2mm layer height for precision and durability. No supports…
This is a blower that I dimensioned as a direct replacement for the Coleman Mach 8 1472a1191 centrifugal blower fan. These fans are prone to drying out, becoming brittle and throwing shrapnel into your A/C unit. Good to have one on hand…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the Canadian Leopard 2A4 unit…
Size: 100mm x 100mm x 4mm 5 Filaments: PLA Jet Black (bottom), PLA Blend Viva La Bronze (text on frame), PLA Simply Green (a2), PLA Azure Blue (b2), PLA Prusa Orange (ab) Note: You can choose “frame” or “solid_bottom” for the bottom part
OK, let me acknowledge, first of all, that I know the Rogue One E-11 was built on an airsoft replica of a Sterling and not a Sterling itself. However, at the time I made this model, I did not have the airsoft replica for reference at the…
M52A1 fuse for the 60mm & 81mm Mortar, thread should be correct for real round. How I Designed This Category: Sport & Outdoors
A custom 3D-printable mount/insert designed to securely hold the FNIRSI HS-02A soldering iron on a Stealth Press 1 platform. The mount aligns the iron tip through the mounting bushing so that it is centered for heat-insert pressing…
Here is a replacement part for any microwave that has a standard Ø 180 mm 5889W1A012A turntable. It's commonly used in budget devices. All you'll need is a T10-T20 torx screwdriver for the assembly. Tip : print the sample test first to…
This is a significant remix of another enclosure. I reduced the size quite a bit, moved the buttons, and did not include a mount point for the inverter as my monitor didn't need an inverter board. Category: Computer
Made to fix 2Ah Battery on Skadis Peg board, or directly on the wall.
Creepy 3D spider for Halloween! 🕸 In this improved Version 2 , the body and legs are printed separately and then assembled. Additionally, the cross on the spider’s back is available as a separate piece – perfect for multi-color printing…
1:10 model of the TOW-2A derived from publicly available diagrams and blueprints. Printing/Slicing: For the wings and control surfaces it is recommended to use a thin layer height (less than 0.2mm) to avoid retraction related problems. It…
Holder to firmly secure your NRGkick charger on the wall while using it at home. With two simple snap hooks you can open it and take it for a ride if needed. You will need 2 M3x30 bolts and 2 M3 threaded inserts (I used Ruthex inserts…
Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…
