71 modeli
Ein Fensterschnäpper war defekt, und die Nachbestellung wäre zu teuer gekommen. So habe ich einen einfachen Ersatz in FreeCAD konstruiert und auf meinem Prusa Mini+ ausgedruckt. Das Teil funktioniert gut.
This model is compatible with the lego system.
After finalizing the DB KÖF-II locomotive succesfully (https://www.printables.com/model/181942-db-kof-ii-gauge-1-132-45-mm), I challenged myself to design the Dutch alternative to this German shunter. This is the series 200-300 of the…
This model is compatible with the lego system.
Wall mount for Makita DUB362 Leaf Blower no support need the design was made to store it with or without battery
This model is compatible with the lego system.
I printed it (also) in PLA, PETG or others more solid materials would be a better decision, IMHO. It turns out this device wasn’t really made to lean against the wall, so I did what any person with a 3D printer would do: I printed a wall…
This model is compatible with the lego system.
This model is compatible with the lego system.
replacement lego axel with stopper
This model is compatible with the lego system.
Introduction I have several pieces of rolling stock (and the odd locomotive) that have their NEM 363 slot at either a non-standard height or depth relative to the buffers. Quite a few of these are Bachmann vehicles (they seem to be…
This model is compatible with the lego system.
A simple wall mount to hang the Makita Leafblower DUB362 by using an existing hole.
This is a newly designed drive unit for my Nederlandse Spoorwegen Locomotor #362 - https://www.printables.com/model/181938-nederlandse-spoorwegen-locomotor-362-serie-200-300 The idea is borrowed from "Bahndrucker":…
Narrow end profile improves air speed for removing heavier debris such as wet leaves
This model is compatible with the lego system.
Bmw E30\E28\E21 - cable clip. OEM-number: 63 12 1 364 431 Maybe it fits some other models. Dimensions reproduced from the original clip. Perfectly fits in original places. Fusion360 source-file (*.f3d) attached. Category: Automotive
Simple brackets to hold a Bosch 36v charger on the wall. It is designed to use M4 or M4.5 flat head (countersunk type) screws. Parts are designed to print without support or raft. You may have to rotate the parts individually to sit…
Model to mount NEM362 coupler on Marklin 3064 or equivalent
This model is compatible with the lego system.
Just like the hakko originals for the FA-430 fume extractor. I made the rectangular one to the same measurements of the original and the round one has a larger OD which helps collect more fumes. Printed from PETG @ 0.2mm layers, 4-5…
Current conducting coupler for modeltrain are expensive. So both hobbyists and commercial vendors came up with the idea of a magnetic, current conducting coupler. This is my take on the that concept. What you need per car, so for two…
5.25 Bay Cover
Please note the natural shrinkage of the material and add 1% in the slicer if your filament shrinks a lot after printing. Enjoy! Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.20 Infill:…
lego 6231 4865 23969 93095 23950 30413 91501 4864 14718 2362
Bmw E30 - head light high beam lamp spacer. OEM: 63 12 1 362 036 All dimensions reproduced from original part. Perfectly fits in place of original spacer. For both lights frame (HELLA, BOSCH). Fusion360 source-file (*.f3d) attached.…
This model is compatible with the lego system.
This model is compatible with the lego system.
Bloques compatibles con sets lego Basic-brick
Vacuum accessory holders to be mounted to the vacuum using 3M Command Strips or double sided tape. Though these should work with any 40mm diameter vacuum accessories, they were designed specifically for the Shark Vertex Pro Powered Lift…
Zcela nové modely lokomotiv a vagónů pro dřevěné vláčkodráhy (Brio, Lidl, Ikea) 🚂 🚃UPDATE: doplněn model se spřáhly na obou stranách pro spojení více lokomotiv Všechny modely zde: BabyTrains Kolekce od autora Ondřej Kabelka |…
When you acquire old wagons you regularly end up with missing couplers, so why not print them? Well, the models I found just didn't work, so I combined what worked, with a few small improvements myself. This style of plastic pin mount…
Printed with PLA and three perimeters. Should snap right on to the main vacuum and then parts snap on after. If the snap is too tight, you can warm it with a hair dryer just a little and it will loosen up.
This model uses the NEM 362 norm for Marklin HO couplings. You insert a short coupling, put it on a C-rail and test any coupling against it. The distance of the upper part of the coupling shaft is 8.5 mm above the rails, as is specified…
Model je rozměrově shodný s dílky Lego. Navrženo ve FreeCad.
The Abloy 362, especially with a Protec2 core, is one of the most unpickable padlocks made, with no one having been able to pick one on video, even with special $300 tools. With its 15mm shackle, it cannot be cut with bolt cutters. If you…
ORGANIZZATORE GT362 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
I drew up these files to run on a laser cutter, to replace a broken, flimsy, plastic insert on a Delta 36250 miter saw. For specifics on how I went about it (with pictures), I wrote them up on this blog:…
This bracket modifies Andy Forsberg's design to allow mounting the charger under a surface, e.g. under a desk. The screws for lower_bracket can now be added after the charger is already in place, and the position of the screws is better…
A simple thingy that let your old and trusty Makita 3620 breathe when placed on a router lift.The router will be raised by 1 cm. Happy routing :) Category: Machine Tools
Traxxas Slash 4x4 Traxxas Stampede 4x4 Traxxas Bandit Traxxas Rustler Traxxas Stampede Traxxas Spartan
Original print by davemeeks Summary Board Game with the following rules: Objective: Be the first player to move your pawn to any of the nine squares opposite your starting side of the board. Setup: Each player starts with a pawn placed in…
This is a replacement for missing glasses of lanterns of a BR 50 2362 from Märklin. As you can't buy the lantern individually. I printed these with transparent filament (PETG). These are press-fit so no glue required (if you want you can…
These vacuums are a little unstable sanding on their own. This wall bracket gets it off the floor so it doesn't constantly fall over.
This model was made to be as cheap and print quickly. You do not need supports. You should be able to drop it in and print. I used PLA and a single dry wall screw to put it in my wall. There are extensions to allow you to hold to…
Fits for the Model IB-RD3621-C31. I guess it could also fit the IB-RD3621U3 which looks to have the same housing. Prints without supports. Face with the fan cut-out on the bed.
BabyTrains - 362 ESO (motorized 🔋) en Complete electronics kit (motor, battery, PCB and components) is available from LaskaKit BabyTrains . Just print the parts and assemble. 📝What is BabyTrains? Story here . Overview of All Models on…
This is a mod to allow using CPAP cooling with the Calamity Toolhead. I already had the 3628 fan plate, so I designed the CPAP portion around that - the ducts are definitely not optimized, but they seem to work well on overhangs and…
In order to place the printed HDD cages in the case the metal HDD and optical bays need to be removed. This is a little annoying and requires the removal of several rivets with a drill. The front I/O needs to be removed, since the cable…
Print settings (for bricks to function they must use these settings) Layer Height: 0.14 or lower XY Hole compensation: -0.08 Elephant Foot Compensation: 0.1 Support: On Support Critical Regions Only: On Remove Small Overhangs: On Support…
Captain_America_Shield__wearable__3362628
Miele cső toldó apa - apa toldó hoszabító két azonos cső vég esetén. Category: Replacement Parts
NOTES: Support material is needed for printing. You need to cut a M4 thread for the threaded bushing hole You can also find the part as a step file in the attachments, if you want to modify or remix it.
This is a replacement for the fine adjustment gear for a Milwaukee 3622-20 laser level. I printed one in PETG over a year ago that has been working fine so far. Im sure more robust filaments would work better but PETG seems to do the job.…
A flush adapter that converts a syringe with a Luer lock to a loose 6mm x 1mm threading found on this particular Hongdian fountain pen nib. Strongly recommended to print in TPU, however, PLA may do as well. Parts Syringe 10pcs 5ml - (…
back seam positioning, one wall on first layer
DIN rail mount for Comtrend GRG-4362 XGSPON ONT , used by CETIN in the Czech Republic. Three-part print: a spring-loaded DIN-rail clip plus two screw-on hooks for hanging the ONT.
Part to mount my Vizio SB3621nb-G8 Soundbar to the bottom of my 32in Vizio E32h-C1 TV via the original leg holes. Print on its side, with the part which will fasten to the soundbar upright, No supports required. Used original leg screws…
Pipe holder under intake manifold BMW E34 525tds E36 325tds uses M8 nut
Parametric 7.7cm tall object with 10-sided faceted geometry and a ripple pattern. Engineered for precise 3D printing.
Bloques compatibles con sets lego Basic-brick
This is a replacement for the fine adjustment gear for a Milwaukee 3622-20 laser level. I printed one in PETG over a year ago that has been working fine so far. Im sure more robust filaments would work better but PETG seems to do the job.…
In order to place the printed HDD cages in the case the metal HDD and optical bays need to be removed. This is a little annoying and requires the removal of several rivets with a drill. The front I/O needs to be removed, since the cable…
This model is compatible with the lego system.
Introduction I have several pieces of rolling stock (and the odd locomotive) that have their NEM 363 slot at either a non-standard height or depth relative to the buffers. Quite a few of these are Bachmann vehicles (they seem to be…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
