155 modeli
This is a horizontal (box) or vertical (wall) mount for a milwaukee drill driver type 2407-20. It mounts with a just a few screws. I use this for my box with powertoolholders (see my other models/collections).
Wydruk około 3,51 €–4,29 € nettoWstępna wycena jednego wariantu
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Cover for your Holosun 407C-X2 or 507C-X2 with side mounted battery tray. Print in supplied orientation. Designed to be printed with NO support and minimal bridging.
Didn't fine any eligent solutions to this problem that retained the ball check valve used for priming the filter. So I made one. 1.5mm holes Print with ABS or PETG. I tested both. Settled on ABS as it looked nicer. Pictured is the PETG…
This is a cover for the holosun red dot. There are 2 versions, one for rail mounted and one for slide mounted dots. Print with extra perimeters so the model is solid. No infill needed. NO supports needed, if your printer copes with…
As promised, here is the Bell 407. A bit of a random thing, but I really like designing helicopters, and this one looked challenging. It's color-separated so you can print the windows in a different color. I hate painting stuff, so I'll…
My students and I are developing gridfinity shadow trays to organize the tools. Some fit better than others and most of them are setup for a 1in tool pocket depth. There will be more posted soon. Here is a tray for the M12 Drill 2407-20.…
This model is compatible with the lego system.
This model is compatible with the lego system.
Picatinny adapter for Holosun HS407c, also works with the HS507c, Trijicon RMR, and ADE Stingray red dot sights. Requires 1x 3/16" diameter pin to press fit the mount on the picatinny rail Print Settings Printer Brand: Prusa Printer: I3…
Andonstar AD407/AD409 soldering microscope mount for Rode PSA 1 microphone boom arm. Re-use the thumbscrews from the original mount to attach this mount to the microscope, then attach to the microphone arm, see photos for my setup. PLA or…
This model is compatible with the lego system.
Xiaomi 14T Pro Case and Phone (2407FPN8EG) (Fusion360)
Reinforcement parts for a Peugeot 407 heater flap. As used in this video The steel spine is not shown here as it is not 3D printed but easy to make elsewhere. The parts were printed from PETG 5 perimeters with 50% infill to give as much…
Gridfinity holder the Neiko 01407A calipers. Link to the item: https://amzn.to/42dtUGe Links provided may be affiliate links meaning I may earn a small commission at no extra cost to you. Some may also include discounts or coupons—use…
Included in the attachments is the parametric Fusion 360 design and the label design
This model is compatible with the lego system.
Holder anti-sag for RTX 4070 Gaming OC Gigabyte graphics card to prevent pcb cracking issues or especially when the PC is being transported. Printed on X1C Bambu lab, no support, 0.20, 3 walls, 25% Gyroide density. You'll need two M3x5mm…
Designed for the Craftsman CMST40730 small parts organizer. It's slightly tapered – shorter side points downward.
Wall mount for Lego Star Wars logo (Lego 75407). Designed from scratch in Blender. Printed on Creality Ender-3 v3 SE, 0.4mm nozzle The goal was to not put any holes in the wall. The holes in the model are designed to fit 3M Command…
This is a replacement insert for the Sidchrome tool sets shown. It will likely not fit other eras than those shown, as some of the individual tools changed dimensions frequently over the years. Found these files useful? Buy me a coffee !…
Tired of picking up your Logitech Z407 remote to switch audio sources? This print bring the buttons that are on the bottom of the Logitech Z407 Dial/Puck/Remote out to the front. Now you can just leave the remote on your desk. To…
There are great tripod screw mounts for cameras. There are interesting solutions for having overhead camera mounts for youtubers and twitch users. So let's use these solutions to free up space for soldering with the Andonstar microscope.…
S'imprime très facilement en TPU, pas de support. Paramètres utilisées: buse 0.4 10% remplissage 4 parois Jupe bordure non nécessaire
Replacement intake strainer to prevent filter from sucking up shrimp and small fish. Double height for more flow.
Caliper (NEIKO 01407A) + Screw Drive (the one came with it) Holder
This model is compatible with the lego system.
When you have a tool and a component breaks, it can slow down your entire project. Even if the part is inexpensive, if you are ordering the part you still have to wait for it to be delivered. My 10" Ryobi Drill Press (DP103L) Depth…
Overview Even if this mount is specifically for the Andonstar AD407 microscope, the mount may fit for other versions like AD409, AD302 and probably others, too. Just check if your microscope has a diameter of 35mm. If yes, this will work.…
Better fitting model of LEGO minifigure seat piece.
This model is compatible with the lego system.
This is a replacment part for the "Halter Siebträger" component of the "AEG Electrolux EA 150" espresso machine. https://www.massinger-ulm.de/epages/61366570.sf/de_DE/?ObjectPath=/Shops/61366570/Products/4071330916 The genuine spare part…
This is a simple extension bracket for the Andonstar AD407 microscope. With it you can put larger PCBs underneath it. I recommend you also upgrade the table. Should be an easy print, no support needed. I used 20% infill. For mounting you…
This is my design for Logitech Z407 speakers that allows low profile horizontal mounting of the speaker using the upright mount position. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 15-25 Filament: Uzy Galaxy Black PLA
This model is compatible with the lego system.
Remix of Johny69's canted mount to incorporate Holosun 407k footprint instead of picatinny rail. The mount is all one piece(minus the slide), I just changed filament from pink to brown at the start of the added plate to highlight remix.…
This model is compatible with the lego system.
I have designed a speaker holder that connects Logitech Z407 speakers to Nema 100 holes. The speakers are simply attached to the holder. Finally, I used double-sided adhesive tape to ensure that the speakers are parallel to the monitor.…
Ring light attachment for the Andonstar AD407 soldering microscope. Can be printed without supports, place all models face down. Bill of materials Adafruit QT Py 2040 (https://www.adafruit.com/product/4900) Adafruit NeoPixel Ring 16 RGBW…
This model is compatible with the lego system.
you may need to sand the peg
Peugeot 407 flap manipulator tool
This is a simple case for the BQ24074 solar lipo charger from Adafruit . Print at 0.15mm layer height and 0.35mm layer width (important for letter fidelity). No supports. Use (4) M2.5x8 screws like these (socket head). M2.5x10 will also…
This model is compatible with the lego system.
Here you can find a spare part for a Seadoo Speedster 150 (also used with other Seadoos) Rubber Bumper PartNr. 204071739. In the spare parts trade the part is much too expensive about 30€ ($27.25) per part.…
Spacer to center the common LED Light for the Andonstar AD407 / AD409. You can apply aluminium foil to increase the reflective area and improve the light. LED Light: https://amzn.to/3wUdy9R Boom Arm: https://amzn.to/4bOq6OE Microscope:…
For mounting the GPU 3 M3 Screws are needed. For mounting it to the case any small wood screws can be used. Thanks for the help @JakobFriedl_909762
Motor Fan Shroud for RC 4075 Motor Print instructions Fan Shroud / Motor Cooler for RC Motor. Designed to fit 4075 sized brushless motor and use a 30mm WTF Fan. Print using PETG for heat stability. Strap to your motor with zip/cable ties!…
The Holosun 407K is a direct mount on my Tisas Nightstalker Double Stack, but I found that even with the elevation adjustment to the limit it was still shooting too low. After getting a shim off of Amazon only to find it wouldn't fit on…
Stihl ersatzhülse - 41407917207 Passend für Gerät:FR85T, FR130T, FR131T, FR410C, FR460TC, FS55C, FS55R, FS55RC, FS55T,
HELLO! :) It’s the beginning of my journey on Printables, so if any information is missing, feel free to let me know in the comments. I’ll be happy to help and add any details you need. Assembly instructions are included in the photo…
Print the pejo407.3mf file Has two colors, back color and front color First print the back color then before layer 16 starts (at 0.2mm layers) you change the filament I use the Filament Change plugin from Cura, it stops the print before…
Bonjour à tous, voici un fichier pour remplacer le bouton de l'autoradio sur Peugeot 407sw impression réaliser en PETG remplissage 100% pour une pièce rigide vu sa taille
This model is compatible with the lego system.
Disclaimer: This design is an independent creation and is not affiliated with, authorized by, or endorsed by the LEGO Group. It is designed to be compatible with standard building blocks. This brickvariation corresponds to the LEGO Lego…
Software and assembly video here: Case is ideally held together with 15mm M3 self tapping screws. Electronics Used (Including Purchase Links) DIYMore STM32F407VGT6: https://www.aliexpress.com/item/1005002186031065.html 2.42 SSD1309 SPI…
This simple clutch alignment tool makes the task of putting in a new clutch disc just so much easier. I recommend printing it with at least 3 outer walls and 20% infill and, if possible, from something that's a bit tougher than PLA (ABS,…
Don't just bash, blast it! This adds the ability to bolt on a 40mm fan on the heatsink when running in hotter weather or perhaps gearing up. Screw holes are undersized for thread forming with M3 hardware. [1] 40mm fan (4010, 4020, 4028)…
A simple divider made for either CRAFTSMAN CMST40709 / ArtBin 6809PC (same bins from the same molds but different branding and colors) These are for the bigger 9 bin storage versions not ones with a ton of tiny slots. This bins don't come…
Marlin 2.1 Kingroon KP3S mks_robin_nano_v1_3_f4 STM32F407VET6
To active these colors YOU NEED PAINT MARKERS!!! Otherwise you only need a little glue for assembly.
Mast mount for the Wiska 407 Combi electrical box. I use it to mount my custom meshtastic node inside the box. The box fits my custom NRF52840 PCB, 4x18650 batteries, GPS and solar charging MPPT module perfectly and has very good…
Adapter for the Andonstar AD407/AD409 Microscope to attach the stand to a Microphone / Boom Arm. 1/4″ 20 Gang UNC (6,35mm Außendurchmesser 5,35mm Kernlochdurchmesser) 3/8″ 16 Gang UNC (9,52mm Außendurchmesser 8,25mm Kernlochdurchmesser)…
Designed to be as close as possible to the original Logitech Z407 speaker stand. I lost one of them during a move, so I used calipers to measure the one stand I had, created a replica in Onshape, and printed a replacement which worked…
Purchased a couple craftsman (model CMST40730) mini drawers only to find they did not come with any dividers. I searched for other models, but they were too basic and lacked indents in the bottom for the little lines, so I made my own,…
Dieses 3D-gedruckte Ersatzteil ist eine praktische Lösung für das häufig auftretende Problem des gebrochenen Gefrierfach-Türscharniers in Beko Kühlschränken. Das originale Scharnier mit der Teilenummer 4079750100 ist ein weißes…
Simple mount to suit Jaycar TL4076/Borlee Mini01 for upgrading to Ramps board The photos show the LCD cover before I had fixed the model to include the SD card slot, this is fixed in the uploaded model.
This mount extends the maximum camera distance of the Andonstar AD407/AD409 microscope camera for more overview when soldering. The minimum distance (=maximum magnification) can still (almost) be reached by lowering the arm to the closest…
GIGABYTE RTX 4070 Fan Filter Made this since I currently have an open bench setup. Requires 3x M3*6 screws Printed in PETG to test but may require a different filament for long term. You will need a 256x256mm bed or larger to fit this…
This model is compatible with the lego system.
Description: This is a parametric model that can be adjusted to fit any ring light to any microscope lens. Originally designed for: Microscope: Andonstar AD407 / AD409 Polarized Ring Light: iFixes iL37…
there may be a stiffness problem
Struggling to switch to having both eyes open now that you have a red dot? Print this cover and now you have to have both eyes open to see any targets, or just cover the optic with blue painters tape... but you have a 3d printer, so…
Bottom case for Adafruit's BQ24074 Solar LiPo Charger with added mounting ears. Remixed from Voltaic Enclosures @VoltaicEnclosure
This end is for a Ridgid 4 gallon model 4070 shop vac with 1-7/8" hose, there are likely other ridgid shopvac's that use this 1-7/8" locking hose as well; its also called a Ridgid Tug-A-Long Genuine OEM 31713 1-7/8 hose. The locking end…
One of my first projects might be useful to someone.
lego 6990 73825 28974 4070 18986 87087 47905 26604 4733 3386 32952
22.Sep 2026: Update der Files für bessere Passgenauigkeit. Der Lokführerstand ist nun fest an der Inneneinrichtung. 25.Sep 2026: Update: Der Restaurantwagen ist nun auch mit Tischlampen ausgestattet
A desk holder for a Milwaukee M12 drill. It has holes in the bottom for mounting, or a foot to enable it to free stand
Gigabyte's 4070ti super is relatively small and compact card. Without adapter, mount it in LianLi SUP 01 enclosure in front vertical position is not possible. Adapter is designed to use 20mm tall M5 screws.
keychain of peugeot 407 2010. The design retrieve the front bumper.
I needed to extend the Z-range of my Andonstar AD407 Pro, so I designed a 88mm extender. I had some M8x110 screws laying around so I designed the extender for it. The extender will fit and tube that has the internal diameter of 12mm and…
Uchwyt anti-sag do karty graficznej Gigabyte GeForce RTX 4070 AERO OC, zaprojektowany w celu zapobiegania wyginaniu PCB pod ciężarem chłodzenia, szczególnie podczas transportu komputera. Wydruk wykonano na drukarce Creality Ender-3 V3 SE,…
Minimalist bumper designed for the STM32F407G-DISC1 development board. Initial insertion of the board is tight; slide the micro USB side of the board in first before securing the board under the two 1.5mm retaining tabs. Printed on Bambu…
This little "riser" piece can be used to make it so that the AD407 Extender by geit_de can fully rotate.
This is a replacement mount for the Andonstar AD407 microscope. It allows you to attach a Mechanic LS720+ polarized ring light. The whole contraption can then be mounted on a microphone arm with a 3/8 thread. Use a nut to lock in place.…
Microscope LED Ring Andonstar AD407 AD409 Distance
Ich habe für mein Lötmikroskop eine gute Beleuchtung gesucht und eine günstige bei Aliexpress gefunden. Leider passt der LED Ring nicht direkt auf das Mikroskop. Mit dem Adapterring passt der Ring gut auf die Aufnahme des Mikroskops.…
The motor housing for my Heller STV-407 ventilator broke, so I modelled and printed a new one.
[Zink und Posaune : Studien zu Überlieferung, Instrumentenbau und Repertoire page 254 Fig. 13; Zeichnung des Original-Mundstücks von Wien, Kunsthistorisches Museum 230 (A.241, 4076), im Maßstab 1:1. (Zeichnung: Graham Nicholson) Fig. 13;…
Other models of these found didn’t have a good alignment to bolt holes within boat.
Summary I've had my TravelPro suitcase for ~7 years, and I love it. Recently, the wheels started making an annoying noise. While TravelPro advertises replaceable parts and a warranty, I was unable to find a place to buy replacement wheels…
Disclaimer: This design is an independent creation and is not affiliated with, authorized by, or endorsed by the LEGO Group. It is designed to be compatible with standard building blocks. This brickvariation corresponds to the LEGO Lego…
Just wanted an cover for the controller volume of Z407🤷
Since my microscope Andonstar AD407 Pro only has the possibility to light the object from above or side and not from below (important when observing insects, leaves etc.) I designed this lightbox. It slides on rails that are bolted to the…
Vesa Mount 100x100 for Andonstar AD407 Pro microscope + Phone with thermal camera This mount is useful even if you don't have a phone with a thermal camera, but instead want to place a regular phone and record what you're doing on the…
![MOTOR HEATSINK 4074 FAN PLATE [40MM]](https://media.printables.com/media/prints/308074/images/2680551_46e06ed3-7932-412b-8c79-5d85cfaf8f25/render3.jpg)
