Wyniki wyszukiwania: 42

Sortowanie

2657 modeli

P
PrintablesSeemomster

Filament samples - 42 materials

A remix of the model Filament sample with box from Zahg . If you need the case for the samples, in the original model includes a great one. Direct downloadlinks for case : box_ top _ pla _v2.stl , box_ top _ petg _v2.stl , box_ top…

Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
26 216
Polubienia
11 131
Ocena
4,96
P
PrintablesKajry

Lego Technic Oracle Red Bull Racing RB20 F1 (42206) wall mount

Wall mount for Lego Oracle Red Bull Racing RB20 F1 set 42206. This mount uses two gray pins on the bottom of the F1 to hold. You can easily see this pins trough the seat for easy hanging. Print settings: Infill: 30% 3D gyroid Perimeters: 3

Wydruk około 0,79 €–0,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
2882
Polubienia
120
Ocena
5
P
PrintablesElektronaut

M42 Body & Lens cap

The body cap has a slightly undersized M42x1 thread and the rear lens cap has a sightly oversized M42x1 thread. This ensures a loose fit. The prints shown in the pictures were done with a layer height of 0,15mm.

Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu

Pobrania
1377
Polubienia
96
Ocena
5
P
PrintablesRipped

Socket Strip Holder | Halter 3-Fach Steckdose 52mm x 42mm

If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped Halter für 3-Fach Steckdose mit Ausschnitten für USB und Kabel. Kann mit Senkkopfschrauben hängend angeschraubt werden. Die Maße sind Breite = 52mm…

Wydruk około 4,99 €–6,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
318
Polubienia
30
Ocena
5
P
PrintablesPatrik

Gridfinity bins for 10 * ER14250 (0.5AA) batteries + bins for LR41 & LR44

Stackable Gridfinity bins, one 1x2x5 for storing 10 * LR14250 batteries, one 1x1x2 for storing 16 LR41 and one 1x1x2 for storing 10 LR44. The base box is generated with the Fusion 360 GridfinityGenerator,…

Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu

Pobrania
214
Polubienia
13
Ocena
5
P
Printablesgskollnau

Bonsai pot 33 rectangular curved inward 162x122x42mm

Bonsai pot 33 rectangular curved inward 162x122x42mm, no support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is…

Wydruk około 0,54 €–0,67 € nettoWstępna wycena jednego wariantu

Pobrania
119
Polubienia
26
Ocena
0
P
PrintablesR.R.

M142 HIMARS

M142 HIMARS

Wydruk około 1,74 €–2,13 € nettoWstępna wycena jednego wariantu

Pobrania
117
Polubienia
5
Ocena
0
P
PrintablesR.R.

Ferrari Racing transporter, Typ Fiat 642 RN2 Bartoletti, 1957

The Courier of Enzo Ferrari The 1950s and 1960s are known as an era that witnessed a boom of race car transporters, which are being re-discovered today and held in a high regard. The two similar-looking transporters of the Scuderia…

Wydruk około 4,92 €–6,02 € nettoWstępna wycena jednego wariantu

Pobrania
104
Polubienia
4
Ocena
0
P
PrintablesFelixTeutsch

Everydays 042 – Stackable Carcassonne Meeple

Today’s design is a playful twist on a classic: a meeple inspired by the board game Carcassonne , redesigned to be stackable and balance-friendly . The proportions and geometry were adjusted so meeples can be stacked on top of each other…

Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu

Pobrania
83
Polubienia
17
Ocena
0
P
PrintablesEto2

Tilt adapter M42 to Lmount

This is an adapter for attaching M42 mount lenses to L mount (Panasonic, Sigma, Leica mirrorless single-lens cameras). It has a tilt mechanism that tilts the lens by about 10 degrees. Applying a thin layer of grease to the threaded and…

Wydruk około 3,18 €–3,89 € nettoWstępna wycena jednego wariantu

Pobrania
73
Polubienia
13
Ocena
5
P
PrintablesAlvomane

Ecowitt WS90 25mm railing mount for 42-45mm M8 pipe clamp | Ecowitt WS90 25mm Geländerhalter für 42-45mm M8 Rohrschellen

EN: With this adapter, an Ecowitt WS90 weather station can be mounted on pipes or railings up to 45mm in diameter using a standard M8 pipe clamp. The adapter has a diameter of 25mm and a recess especially for the WS90 power connection…

Wydruk około 1,52 €–1,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
63
Polubienia
8
Ocena
0
P
PrintablesTeo_211

MTI V42 Powerboat Wall Art

MTI V42 Wall Art silhouette model. Adjustable size.

Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu

Pobrania
61
Polubienia
10
Ocena
5
P
Printablesaaronp18

Nespresso Vertuo Plus Replacement Capsule Container Krups XN900 MS-624276

I picked up a second hand Nespresso Vertuo Plus which was missing the rear capsule catching container so I decided to print one! My print bed is 210mm so it doesn't quite reach the top, but that's ok, capsules still fall in correctly. I…

Wydruk około 5,83 €–7,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
60
Polubienia
5
Ocena
0
P
PrintablesEddy The Wizard

Asus PG42UQ / HyperX QuadCast mount

Simple mount for attaching the HyperX QuadCast to a Asus PG420UQ monitor.

Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
57
Polubienia
11
Ocena
5
P
PrintablesHagelstone

Ninebot G 30 D adapter to ABUS 453427 bracket (ABUS EaZy-KlickFix)

Note by the way! The ABUS U-lock Granit XPlus 540 30cm does not fit through the rims of the Ninebot G30D due to the rectangular shape of the bracket and is only suitable for connecting the Ninebot frame (45 ° spar) to a traffic sign or…

Wydruk około 3,89 €–4,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
49
Polubienia
5
Ocena
0
P
PrintablesSan G Dice

D20 Ice Cube Holder (42mm ice cube, can be resized)

I've been working on this for a while now. This is version 4. I did a test print of version 3 (the files you see) and just needed to add one small thing to it to get the connection between the halves ready, so I did that, and I'll do…

Wydruk około 4,86 €–5,94 € nettoWstępna wycena jednego wariantu

Pobrania
37
Polubienia
1
Ocena
5
P
PrintablesNot Pops

PM422 Songbird Business Card Holder

This is a PROP/non-functional replica of a PM422 Songbird by JamesRPatrick used as a business card holder. Customizable by editing the text via Orcaslicer. Keep in mind that you MUST move the text down to the bottom of the backplate to…

Wydruk około 6,38 €–7,79 € nettoWstępna wycena jednego wariantu

Pobrania
36
Polubienia
4
Ocena
0
P
Printableskaje

42 - Version42 (and everything explained!)

The Answer. This one : 42 and some Gears This way too complicated print uses a set of gears to rotate segments into place to show the number 42. The Explanation : If you have looked at any of my other "42" prints you have probably already…

Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu

Pobrania
35
Polubienia
20
Ocena
0
P
PrintablesDanAndersen

Touch-Prevention for TC420 TC421 LED Time Controller (Fishtank Aquarium Light Control)

The TC420 and TC421 are very nice and relatively cheap LED controllers for fish tank / aquarium lights. However, there is no cover at the connections, so I created a two-piece cover. The lower part will be screwed in permanently. The…

Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu

Pobrania
30
Polubienia
4
Ocena
0
P
PrintablesARF

Dewalt-Akku-Staubsauger-Adapter Schlauch 42mm auf 1 1/4Zoll

Der Adapter von 42 mm (Schlauchseite) auf 1 ¼ Zoll (Zusatzteile z.B. Fugendüse) diese ist bei Dewalt-Deutschland nicht verfügbar.

Wydruk około 2,59 €–3,17 € nettoWstępna wycena jednego wariantu

Pobrania
26
Polubienia
2
Ocena
0
P
PrintablesDn3d

Puffer für BLS Re425 (Lima Modell)

Der Puffer wird in 2 Teilen gedruckt. Es ist zu empfehlen die “Front” mit einer möglichst hohen Auflösung (geringe Layerhöhe) zu drucken, damit alle Details erhalten bleiben. Für den “Stiel” sind leichte Supports nötig, ansonsten…

Wydruk około 0,03 €–0,04 € nettoWstępna wycena jednego wariantu

Pobrania
23
Polubienia
2
Ocena
0
P
PrintablesTi

Opticron BGA 8x42 Lens Cap

This is an eyepiece lens cap for an Opticron 8x42 BGA monocular. The rubber cap supplied with this monocular is very easy to knock off or misplace as it sticks out from the body of the monocular and has no retention mechanism; this print…

Wydruk około 0,65 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
21
Polubienia
1
Ocena
0
P

lego 5427

I couldn't find this brick anywhere. That's why I created this model for printing. The model is created with the LDraw library ( https://www.ldraw.org/ ). Program LDCad ( https://www.melkert.net/LDCad ) uses this library to create a Lego…

Wydruk około 0,53 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
21
Polubienia
0
Ocena
0
P
PrintablesAlvomane

Ergonomic Twirler for the Hazet 810R or Inbus Flow 73424 Bit Ratchet Screwdriver like WERA 838 | Ergonomischer Zwirbler für den Hazet 810R oder Inbus Flow 73424 Bit Ratschen-Schraubendreher

EN: The HAZET 810R bit or Inbus Flow 73424 bit ratched screwdrivers are some of the best screwdrivers with a silent and stepless ratchet. Nevertheless, I almost didn't buy the HAZET 810R because it doesn't have the very practical twirler…

Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
20
Polubienia
4
Ocena
5
P
Printables3DJG

Lock nut M42x075

Lock nut M42x075 The thread should be printed with a layer height of 0.12 mm or less for good rolling. Material: PETG Can be printed without support material. With a quality filament (Prusament PETG) and good printer maintenance, you…

Wydruk około 0,66 €–0,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
19
Polubienia
1
Ocena
0
P
PrintablesSean Kane

Frigidaire 318242275 (Electrolux ICON ) Stovetop knob base & post strengthener

This is a replacement for the Frigidaire 318242275 (Electrolux ICON) stovetop knob bases. Although the part you grab is metal, the base is plastic, and the knob post that connects to the stovetop often cracks at some point, and then the…

Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
19
Polubienia
0
Ocena
0
P
PrintablesHeleplanchiste

(Do not Print) Withings Scan Watch 42mm charge station

I printed this plan and realized it didn't fit my withings scan watch, so I took the inspiration from the plan and designed my own stand. If you print it, and it works for you, please rate it and post a make, that would be highly…

Wydruk około 1,91 €–2,33 € nettoWstępna wycena jednego wariantu

Pobrania
18
Polubienia
0
Ocena
0
P
PrintablesAdyminte

CUP-4815162342

I tried to model cup. But you can use it however you like I look forward to your makes Happy printing!

Wydruk około 2,16 €–2,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesMarius Mihasan

Microplate adapter for Tristar2 Multimode Reader LB942

I need to take OD from bacterial cultures grown on microplates, but with the available black microplate adapter for my Tristar2 Multimode Reader LB942 the leads of the plates were always scratched and measurements were not reliable.…

Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu

Pobrania
16
Polubienia
2
Ocena
0
P

RPG mini Stand marker -- fit on MZ4250s models

Helpful to distinguish which creature is which or track status conditions. The need first arose, when my ranger learned Conjure animals. I just printed 8 wolves, but the turns took too long. So I also printed 8 of those in different…

Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu

Pobrania
15
Polubienia
2
Ocena
0
P
PrintablesErikSi

142 Vorsicht: Spielende Zahlen! Suguru 15x10n6

Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.

Wydruk około 13,67 €–16,70 € nettoWstępna wycena jednego wariantu

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesKagouBreton

Barrette de fermeture pour trappe de 420 (voilier)

⛵ Barrette de fermeture pour trappe de 420 (voilier) Petite pièce technique imprimable en 3D destinée à remplacer la barrette de fermeture d'une trappe sur un dériveur 420 ⚓ Sur mon bateau, la pièce d'origine était cassée / manquante,…

Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
0
Polubienia
1
Ocena
0
P
PrintablesJace1969

Iron Man Mk42 Helmet

Here is Iron Man Mk42 Helmet. Print instructions Category: 3D Printing

Pobrania
28 056
Polubienia
1657
Ocena
4,18
P
Printablesnzalog

2230/2242/2260 to 2280 m.2 adapter ssd

Please leave a like if you enjoyed the model or it helped you. :) Remixed from : https://www.thingiverse.com/thing:4715615 Started off by making it a bit easier to print by adding a slopes to some of the overhangs. Then ended up taking…

Pobrania
7985
Polubienia
332
Ocena
4,95
P
Printablesiczfirz

Iron Man MK42 Landing Pose Support Free Remix

Subscribe Now! Time-lapse print video : https://youtu.be/F1pj7ACaZ70 Remix to support free and printed. Subscribe to find out more support free 4K Time-lapse video: Subscribe Now!…

Pobrania
7824
Polubienia
1405
Ocena
4,93
P
PrintablesJakub Kočí

Locomotive 742 (H0)

This is a H0 (1:87) model of a czech diesel locomotive 742 from the Jan Zeleny's Mashinky game (see the mashinky.com website). This locomotive can be used for model railways. Read more at:…

Pobrania
6198
Polubienia
351
Ocena
4,17
P
Printableseliasjonsson

M.2 SSD 2230 to 2242

Needs an M2x3 or M2x4 screw for attaching the SSD to the computer. Pusa Slicer: Filament -> Cooling -> min print speed probably needs to be set to 3 or there might be defects on your printed part. Things will probably get pretty toasty in…

Pobrania
3480
Polubienia
187
Ocena
4,95
P
PrintablesDavid Newham

Lego Mercedes F1 42171 Wall Mount

Designed to fit snugly in the center of mass in the model. One screw seems to be enough to hold against the wall I recommend printing it with at least 6 walls, 35% infill, tree supports.

Pobrania
3423
Polubienia
177
Ocena
5
P
PrintablesKajry

Lego Technic Ferrari SF-24 F1 (42207) wall mount

Wall mount for Lego Ferrari SF-24 F1 set 42207. Print settings: Infill: 30% 3D gyroid Perimeters: 3

Pobrania
2762
Polubienia
102
Ocena
5
P
PrintablesVincent

LEGO Technic 42141 McLaren Formula 1 F1 Race Car Wall Mount

New for 4/24/24 - Minimal versions! Use the minimal versions to save time and filament if you don't intend to use a spacer. About The vertical mount supports nose-up or nose-down. The horizontal mount supports nose-left or nose-right. The…

Pobrania
2686
Polubienia
317
Ocena
4,95
P
PrintablesIdea Prints

Lego Technic Police Interceptor #42047

★·.··.·★ 👋 Hello😁 ★·.··.·★ Before reading the description I recommend in the future to look at the collections created by me for better service for high projects is to distinguish them better 💚MAKERWORLD→ COLLECTIONS Lego Technic Police…

Pobrania
2367
Polubienia
345
Ocena
4,5
P
Printablesthenickdude

Microscope adapter for 4x macro photography with Sony A, E/FE, Canon EF/EF-S, RF, M, Nikon F, Z, Fuji X, Leica L, M4/3, M42 cameras

This adapter allows you to mount any finite RMS microscope objective (i.e. objectives that are marked with "160mm" rather than "infinity") on your Sony A, Sony E / FE, Canon EF / EF-S, Canon RF, Canon M, Nikon F, Nikon Z, Fujifilm X,…

Pobrania
1957
Polubienia
270
Ocena
5
P

Shelby AC Cobra 427 Kit Card (1:24 scale)

Summary This is a model of a Shelby AC Cobra 427 in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned, but the car…

Pobrania
1862
Polubienia
371
Ocena
5
P
PrintablesLWC

PVS 420 thermal vision 50Hz low budget 18650 monocular (256X192, 384X288, 640X512)

UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…

Pobrania
1844
Polubienia
1231
Ocena
5
P

OpenRun - shoe last, size 42

Do you want to make your own DIY running shoe? Use our shoe last. For more sizes and all instruction visit: www.openfootwear.com

Pobrania
1678
Polubienia
69
Ocena
0
P
PrintablesManifold3D

Iron Man wearable helmet Mark 42 Mk 42

This is a fully printable, full size Iron Man Mark 42 helmet! You can read my many updates down below on how I got to this point. Print out the parts, orient them as you wish, paint them and wear it! The photos I posted are of a scaled…

Pobrania
1636
Polubienia
233
Ocena
5
P
PrintablesJuli15

Wago 221-(412, 413, 415, 420) DIN Rail Mount / Holder

DIN Rail Mount for Wago 221-412 (2-conductor), Wago 221-413 (3-conductor), Wago 221-415 (5-conductor) and Wago 221-420 (10-conductor) as well as mixed Connector mounts. Includes Models where the wago opens to the left (Models ends with L)…

Pobrania
1634
Polubienia
537
Ocena
4,63
P
Printablesthall72
Pobrania
1625
Polubienia
70
Ocena
0
P
PrintablesKrakka10
Pobrania
1570
Polubienia
112
Ocena
5
P
PrintablesSkinky86

LEGO Technic 2022 Ford GT 42154 Wall Mount

Print the model upright so the layer lines are vertical when mounted to the wall for best strength. I printed with PETG but you can probably get away with PLA as the model isn't very heavy.

Pobrania
1553
Polubienia
109
Ocena
4,89
P
Printablesthall72

Lego Compatible (54200.dat) Slope Brick 31 1 x 1 x 0.667

This model is compatible with the lego system.

Pobrania
1455
Polubienia
50
Ocena
5
P
PrintablesGuffen Peru

FG 42 1:1 prop (Fallschirmjägergewehr 42)

The FG 42 is arguably the coolest machine gun ever. This is a 1:1 prop model, with moving bolt handle and trigger. The magazine is detachable. Rubber bands or springs are required if you want operational bolt handle and trigger. All parts…

Pobrania
1455
Polubienia
172
Ocena
5
P
PrintablesBrew Boy

BB-420 Modular Carbine (Functional Prop)

This is a toy for cosplay or display purposes only! Never brandish this as a real weapon or bring it out in public, this is a toy modeled off of a REAL LIFE firearm, treat it as such. Just because you know it's a toy, doesn't mean other…

Pobrania
1448
Polubienia
721
Ocena
0
P
PrintablesVincent

LEGO Peugeot 9X8 24H Le Mans Hybrid Hypercar 42156 Vertical Mount

Print using at least 4 perimeters and with 20%-30% infill. I suggest some material that resists cold flow better than PLA such as PETG or ASA. Leave the part the way it is oriented to the bed so the layer lines are arranged properly for…

Pobrania
1282
Polubienia
69
Ocena
5
P
Printablesthall72

Lego Compatible (2420.dat) Plate 2 x 2 Corner

This model is compatible with the lego system.

Pobrania
1259
Polubienia
50
Ocena
5
P
PrintablesGIGA PC

LEGO Technic 42035 Mining Truck

LEGO Technic Mining Truck #42035 Model doporučuji tisknout zvětšený na 200 - 300 % PLA - 15% výplň Pneumatiky - TPU

Pobrania
1242
Polubienia
226
Ocena
4
P
Printablesxtf

LEGO Technic - Ferrari Daytona SP3 (42143) Wall Mount

Printed with 3 perimiters and 50% infill. Wall Mounts for the other super cars: LEGO Technic - Porsche 911 GT3 RS (42056) by ravestop LEGO Technic - Bugatti Chiron (42083) by ravestop LEGO Technic - Lamborghini Sian FKP 37 (42115) by me…

Pobrania
1235
Polubienia
99
Ocena
5
P
Printablesthenickdude

Microscope adapter for 2x macro photography with Sony A, E/FE, Canon EF/EF-S, M, RF, Nikon F, Z, Fuji X, Fuji G, M4/3, Pentax M42 cameras

When the 4x microscope objective available from “Reakway” is mounted 150mm away from a camera's sensor, it works wonderfully for photography, covering a full-frame image sensor with a nice sharp image. You can find my standard…

Pobrania
1225
Polubienia
300
Ocena
5
P
PrintablesJace1969

MG42

Thanks to Harrison Bergeron for pointing out these awesome .SKP files And thanks to the designer very cool at https://3dwarehouse.sketchup.com/model.html?id=e4aae0c0ae79acc7fec1d9df8807552d

Pobrania
1218
Polubienia
72
Ocena
5
P
Printablesravestop

LEGO Technic - Bugatti Chiron (42083) Wall Mount

printed with ankermake m5 in normal mode, 50% infill, support

Pobrania
1194
Polubienia
77
Ocena
5
P
PrintablesPugwash

Lego 42096 Porsche RSR Wall Hook

A wall hook for the Lego Porsche RSR to hang it facing upwards, wheels against the wall but no compression of the suspension springs. The hook holds the car by a horizontal beam near the front, as indicated in the photos. The holes are…

Pobrania
1150
Polubienia
156
Ocena
5
P
PrintablesPvtDBJackson

Snap-On Screwdriver SDDP42 Handle

Snap-On screwdriver handle modeled by manually measuring one. This isn't exactly functional as-is, since there is no provision for attaching anything to the handle. This is uploaded so that others might remix it into something useful.…

Pobrania
1131
Polubienia
104
Ocena
5
P
PrintablesKangarooneering

(Updated V3) M42 Sony E Mount Adapter

Update (12/30/22) : I've been using an updated version 3 for a few months now and I think I'm mostly satisfied with the newest version. The newest version has rotated the threads so that focus markings on lenses better line up with the…

Pobrania
1127
Polubienia
42
Ocena
4
P
Printablesxtf

LEGO Technic - Lamborghini Sian FKP 37 (42115) Wall Mount

Printed with 3 perimiters and 50% infill. Wall Mounts for the other super cars: LEGO Technic - Porsche 911 GT3 RS (42056) by ravestop LEGO Technic - Bugatti Chiron (42083) by ravestop LEGO Technic - Lamborghini Sian FKP 37 (42115) by me…

Pobrania
1095
Polubienia
64
Ocena
5
P
PrintablesGustavo

Prusa i3 MK3 & MK2/S frame (MK42/52)

Extruded this from original Prusa DXF files. MK42 = Prusa i3 MK2 and MK2S (frame, Y carriage) MK52 = Prusa i3 MK3 (frame, Y carriage, fronat & rear plate) Looking for ALU extrusions? Look here: https://www.thingiverse.com/thing:2838381…

Pobrania
1077
Polubienia
66
Ocena
0
P
PrintablesDoranku

T2, M42, M48, 1.25" adapters

Somehow I keep loosing these adapters, so here is a 3D printable set of anything I could think off. Obviously print them in a colour that doesn't allow light to come through, black is a good choice. PETG seems a good choice, it is a…

Pobrania
1067
Polubienia
40
Ocena
0
P
PrintablesMike Hancock

LEGO Technic 42171 Mercedes-AMG F1 W14 E Wall mount (No Supports Needed)

Welcome to my first published model! This is a wall mount for the Technic Mercedes F1 car. The majority of mounts for this car require supports and/or are printed in an orientation where the car will be pulling against the layer lines -…

Pobrania
1021
Polubienia
94
Ocena
5
P
Printablesthall72

Lego Compatible (42003.dat) Technic Cross Block 1 x 3 (Axle/Pin/Pin)

This model is compatible with the lego system.

Pobrania
1004
Polubienia
64
Ocena
0
P
PrintablesEngiGear

ISO 2342 Headless Screws

🛠 ISO 2342 Headless Screws These printable headless screws follow the ISO 2342 standard — perfect for alignment and positioning tasks. Designed without a head, they’re ideal for clean, flush-fit applications. 🖨 Recommended Print Settings:…

Pobrania
980
Polubienia
886
Ocena
5
P
PrintablesZiemniaczenka

M42 to Canon EF adapter

Proper clearance, lens orientation and flange focal distance. Tested with Helios 44M-4 and Beroflex 135mm F2.8.

Pobrania
979
Polubienia
58
Ocena
4,89
P
PrintablesJevermeister

DIN Rail DM542 DM556 CNC stepper driver mount with M4 heat inserts

You will need M4x6x5 heat inserts. If you would like to use something else or screw straight into plastic, there is also a .step provided. M4x10 screws are a perfect match for attaching the stepper drivers but make sure the head isn't too…

Pobrania
952
Polubienia
76
Ocena
5
P
PrintablesEistee

Gridfinity Bin Labels Flat-Head cap screw hex socket ISO 10642 former DIN 7991 M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20

The length on the label is to scale, otherwise it is cut in the middle. The shaft diameter and head are not to scale as this look awkward on the small labels. I sticked with the text style of the original labels by the user @Pred_457770 .

Pobrania
915
Polubienia
237
Ocena
5
P
PrintablesjonnieZG

Modular Test Tube Rack (ISO 4142:2002)

A stackable, interlocking modular holder for vials and test tubes in accordance with ISO-4142-2002 standard. A single module dimensions are 90x90x50mm. One module has the following openings: 2 x 25mm (for tubes of diameter ⌀24mm) 6 x…

Pobrania
908
Polubienia
144
Ocena
4,33
P
Printablesmmuellerphoto

BTT EBB42 Mount - Eva 3.x - Orbiter 2.x & LGX Lite & Sherpa Mini

This is a mount for the BTT EBB42 toolboard for Eva 3.x with Orbiter 2.x extruder. Two versions available: one with a mounting option for piano wire inside umbilical cord, one with mounting option for the outside. Piano wire can be…

Pobrania
906
Polubienia
109
Ocena
5
P
PrintablesRacingRosso

Ironman helmet mark 42 mk42 Ender 3

Fits of Ender 3 (scale for your head appropriately(130% for normal head))

Pobrania
902
Polubienia
115
Ocena
4
P
PrintablesFrightenEMU

Voxel Demon Skull Bong 420

The voxelized Demon skull bong has a diffuser perc and the downstem is designed to fit a 14mm bong bowl. I haven't printed these yet. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: Dynamic…

Pobrania
897
Polubienia
115
Ocena
0
P
Printablesfrsp_1

Milwaukee Packout Medium Case 48-22-8424 updated 2025-06-20

Not meant for printing, although I guess you could. This is just a blank to use to generate foam inserts with. Looked around and couldn't find anything for these. I imagine this could be used for the small and large cases too but I don't…

Pobrania
894
Polubienia
66
Ocena
0
P
Printablesthall72

Lego Compatible (4274.dat) Technic Pin 1/2

This model is compatible with the lego system.

Pobrania
870
Polubienia
59
Ocena
0
P
Printablesxtf

LEGO Technic - McLaren P1 (42172) Wall Mount

Printed with 3 perimiters and 50% infill. Wall Mounts for the other super cars: LEGO Technic - Porsche 911 GT3 RS (42056) by ravestop LEGO Technic - Bugatti Chiron (42083) by ravestop LEGO Technic - Lamborghini Sian FKP 37 (42115) by me…

Pobrania
851
Polubienia
49
Ocena
5
P
Printablesjames gittins

Lego Technic Mercedes-AMG F1 W14 E (42171) Wall mount

Lego Technic Mercedes-AMG F1 W14 E (42171) Wall mount to mount the facing nose down. Hooks in so can not fall out and pulls car to the wall slightly so all 4 wheels are touching still.

Pobrania
848
Polubienia
45
Ocena
0
P
PrintablesPhysics Dude

Ultra minimal M42 to Nikon F-mount lens adapter

I found an old Carenar lens with a M42x1.0mm threaded mount (not to be confused with T-mount which is a M42x0.75mm thread) that I wanted to use with my Nikon DSLR, but the only adapter I found claimed “INFINITY Focus NOT ALLOWED.” This is…

Pobrania
827
Polubienia
74
Ocena
4,67
P
PrintablesMetikumi

Beautiful Woven Basket in 142 Sizes.

This is my design of a woven basket. It requires no supports for printing. Video How to Print the Basket A Prusa Slicer example project, LR2316-… Print.3mf , is available with all recommended settings. Feel free to use this, or refer to…

Pobrania
802
Polubienia
146
Ocena
5
P
Printablesredaeq

Sohle, Einlegesohle, Schuh Erhöhung / Insole, shoe elevation 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, Größe 42

Einlegesohle, Schuh Erhöhung, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, Größe 42 Gedruckt in TPU, kann natürlich auf andere Größen skaliert werden. ----------- Insole, shoe elevation, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, size 42…

Pobrania
784
Polubienia
49
Ocena
4
P
PrintablesJulian

Lego TECHNIC kompatible Achse / Verbinder / Kreuzstange 7M / 7L (4211805/44294194/44294), 55mm lang Ersatzteil

Hier ein Ersatzteil für verschiedene Bausätze. Kompatibel mit LEGO® Technic 7M / 7L 4211805/44294194/44294 - 55mm lang

Pobrania
782
Polubienia
34
Ocena
0
P
PrintablesTycho Design

M3 CSK Socket Head Screw Collection M3x6-M3x30 ISO 10642 / DIN 7991

Collection of screws (ISO 10642 / DIN 7991) including : M3x 5, 6, 8, 10, 12, 16, 20, 22, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…

Pobrania
773
Polubienia
82
Ocena
0
P
PrintablesBooks

Gridfinity 42mm Hinge-Top Box

A 1x1 Gridfinity box with hinges. Gridfinity is an organization system designed by Zack Freedman, inspired by a similar system by Alexandre Chappel. It uses 3d-printed grid baseplates of 42mm squares to nicely arrange a large and growing…

Pobrania
769
Polubienia
270
Ocena
3
P
PrintablesHyperspeed1313

M.2 2230 to M.2 2242 Adapter Bracket

Simple bracket that mounts to the standoff screw for the M.2 slot. I didn't like how most options out there have an offset between the bracket screw hole and the drive's mounting edge and/or were too thick for standard M.2 mounting screws.

Pobrania
764
Polubienia
54
Ocena
5
P
Printablesraff96

Lego F1 Ferrari SF-24 (42207) wall holder

Print it the same way you hang it, with no support, i suggest PETG with 30% infill and 3 perimeters, you'll also need a way to fix it to the surface you want to put it. Watch the third image to hang it correctly.

Pobrania
763
Polubienia
52
Ocena
5
P
PrintablesSsgtStretch

RC Tower Crane 1.42m 56in

Recommended items to complete this crane are hot glue, BBQ skewers, Popsicle sticks, rubber bands, 30 minute epoxy, kite string, small-sized hand-held drill and bits, four 360 degree rotating 9 gram servos, one receiver, transmitter, and…

Pobrania
762
Polubienia
178
Ocena
4,33
P
Printableschrisebryan

Singer Heavy Duty 4423 Handwheel Upgrade

Tired of hand cramps and struggling to control your Singer Heavy Duty 4423 when tackling thick projects? This 3D printable handwheel upgrade is here to revolutionize your sewing experience! Problem: The original handwheel on the Singer…

Pobrania
750
Polubienia
107
Ocena
4,86
P
PrintablesBryan

DM542 Din rail mount

DM542 stepper motor driver dins rail mount with Solidworks 2016 file This file is to be used with this din rail clip .

Pobrania
735
Polubienia
71
Ocena
5
P
Printablestomasmcz

M42 Lens Cap

A rear lens cap for the M42 mount. Inspired by various caps from old Helios and Jupiter camera lenses. The thread is designed to the M42 specification, so you will probably need to scale it up a little for it to fit. I'm using 100.75 %…

Pobrania
731
Polubienia
50
Ocena
4,92
P
PrintablesGIGA PC

LEGO Technic 42036 Silniční motorka

Lego Technic 42036 set - Silniční motorka 375 dílů Model doporučuji tisknout zvětšený na 200 - 300 % PLA - 15% výplň Pneumatiky - TPU

Pobrania
727
Polubienia
104
Ocena
5
P
PrintablesRiver3DP

FREE 420 bic case!

2 different versions! FOR FULL SIZED BIC LIGHTERS 0.2mm layers 0.4mm lines aggressive cooling brim optional More of my designs at: https://cults3d.com/en/users/river3dp/

Pobrania
726
Polubienia
135
Ocena
4,5
P
Printablesthall72

Lego Compatible (24201.dat) Slope Brick Curved 2 x 1 Inverted

This model is compatible with the lego system.

Pobrania
714
Polubienia
49
Ocena
5
P
PrintablesDorffMeister

2.42in OLED Case with optional Platform

This project is for the 2.42" OLED screen (IIC or SPI) Preferably with the pins on the top center of the long side as shown in the pictures. The ESPHome code for this project can be found here at…

Pobrania
702
Polubienia
22
Ocena
0
P
Printablesravestop

LEGO Technic - Porsche 911 GT3 RS (42056) Wall Mount

printed with ankermake m5 in normal mode, 50% infill, support

Pobrania
699
Polubienia
63
Ocena
5

Shelby cobra 427 year 1965 Designer Ed van der Heijden

Shelby cobra 427 year 1965 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 210 Filament material: PLA

Pobrania
698
Polubienia
244
Ocena
5
P
PrintablesTripod Tech

Gridfinity 35x42mm Ruler Holder Organizer

I was on the Gridfinity train, planning out my first drawer, and I had ALMOST enough room for one more section, but not quite. So, I made a filler version that is, of course, 7mm smaller in width than the original size. That way, I don't…

Pobrania
689
Polubienia
98
Ocena
4,2
P
PrintablesHartvik Line

420 roller chain. Modular, with chain lock and sprockets

420 roller chain, chain lock included 42 links 53,3 cm 84 links 106,7 cm 168 links 213,4 cm Also made a 102x102 mm version for smaller printbeds Sprockets: 9T,11T,12T,36T,48T You have to break off the two ends so you get two "female"…

Pobrania
687
Polubienia
76
Ocena
5