Liczymy pasujące modele…
Meine erste Kreation bzw. Model also seit bitte nachsichtig. Sollte eine Aufbewahrungsbox für die Steckschlüssel sein, da beim Original nur eine Papierschachtel dabei war. Kann gerne geteilt und verbessert werden.
Wydruk około 1,55 €–1,90 € nettoWstępna wycena jednego wariantu
This model is compatible with the lego system.
This model is compatible with the lego system.
Some cover to hide the chrome. Pair them with plastic dip paint to get a nice black matt finish.
The cover can be printed with any material (ABS recommended) with any layer hight from 0.3 to 0.1 mm The seal has to be printed out of TPU or any other suitable FLEX filament. Even though the seal is optional, concider that a well fitted…
It is common for the tabs on the back of the 130mm centre cabs to break during removal. This glue-in insert can repair a broken tab and extend the life of the cap. Ideally print in ABS and use a solvent cement to glue the required amount…
I wanted a thin case for my 7in display. This is about as thin as it can possibly be. Has cutouts for some of the parts on the board so it can mostly lie flat against the PCB. It also has holes in the back for a vesa mount. I used this…
Cut in half for best results and strength
Die Original Version war mir doch etwas zu langweilig. Daher hab ich mir meine eigene Kreation erstellt. Wieder mit eigenen Felgen und getrennten Reifen. Die Reifen müssen in TPU gedruckt werden. Da Sie sonst nicht über die Felgen passen.…
Print setting recommendations: Make sure bridge supports are on for the top piece Print with the outside down Print in a high temp filament in case your keys get left in the car or sun (i used ASA) When disassembling your remote I suggest…
This model is compatible with the lego system.
This is replacement for the LEGO wheel 93595. The inner diameter is tricky and depends heavily on the tolerances of your printer. It took me three iterations on my ender 3 v2 with a final inner diameter of the hole of 3.65 mm in the stl…
You might want to use 99% scaling depending on material and shrinkage settings that you choose. Mine is printed with ASA and 99% scale.
These standoffs were were made to solve the problem that the screen manufacturer didn't solve: acceptable mechanical fastening. I used the following parts. Screen: https://www.amazon.com/gp/product/B085MXM2M2 Standoffs:…
This is a prototype of a door handle with strap to get a « GT3 rs » door handle look on a Abarth. This is a work in progress file that will break at the first use. The only thing is that I designed the door handle a bit too thin : The…
BMW nr. 51 16 8 135 595 - E36 armrest sleeve
This model is compatible with the lego system.
A case to mount a UC-595 touch screen display for my printer. My table is built using 4040 extrusions, but the 3030 mount bracket provided in the original vesa mount worked just fine. I thought it would be fun to use a voronoi pattern on…
Printed out of ABS and it works fine. Uploading this, the mount lasted allready 2 ½ years with frequent use during all season. Although heat set inserts are needed for the M3 bolts, the M4 bolts, fixing the mount to the handle bar, can be…
Replacement seal for a Garmin Zumo dustcap. It could fit other Garmin systems but i'm not sure about that. I printed it without supports or a brim. Printed with flex, Make it a fine print, because it's tiny. Print with the “ribbed” side up.
Hinge Fix for Harbor Freight LED Work Light SKU: 59536 I have had a few of these lights and the hinges always break on them. Thankfully, this is a super fast and easy print (mine was 30 minutes for both sides!)! I printed this from ABS on…
Paper towel roll spool holder for Georgia Pacific "blue ultra" 59589. modeled to fit 8" paper towels.
Air vent repair kit for Fiat 500 and Abarth 500/595. When replacing the factory radio with an aftermarket unit, the air vent grille has to be removed. Unfortunately, after this modification the ventilation no longer works efficiently. My…
Ersatzteil / Spare Part
Works in PLA using 0.15 mm layer height with structural settings . For a smooth finish on the outer rim, enable ironing . I modeled this part as good as my skill set allows to copy the original design. Printing notes The back side can be…
This simple case protects your Garmin Nuvi 2595LMT GPS while you're traveling. I was always afraid that it would be damaged in my luggage, so I made this to keep it safe. Just print it out, place the GPS inside face-first, and secure it…
Notice : I am not a dog and I share my best 3d designed free to print. Please if you want to sell them, contact me and I am sure that I can provide you a very fair price for a commercial license. Theses rally / rallycross inspired lights…
The best mod for your Abarth 500/595 etc. Change the look of your car’s rear with this simple trick. Tutorials on how to remove the rear wiper are available on YouTube. Highly recomended to print it with ABS. Use dedicated glass adhesive…
Chain Guard Replacement for Cube Bikes (21-15953) See print orientation on image.
Rugged box for the Viking 1000-Amp jump starter. This includes the original Rugged Box models, as well as custom inserts to hold the jump starter (battery), cables, charging brick, and charging cable. The box pieces used from the original…
ORGANIZZATORE GT595 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Combo Anycubic Kobra S1 Laser: Mecpow X3Pro 10W
Printed in PLA with no solid layers, only infill and 3 perimeters. Designed using the technical drawing of the lock from Abus.
This slider (part number 627595), which is used to adjust the humidity of the VitaFresh vegetable compartment in my bosch fridge broke. I didn't want to pay the 14 Euros for the original spare part, so I modeled it myself. I designend it…
The lid for my coffee grinder broke. I tried super gluing it, and that held for a while, but I dropped it, and it broke again. So, I decided to print a new lid. I designed it in Tinkercad. I inspected it and reduced it in Meshmixer. Print…
Repair part - a latch for Decathlon 8595495 - Hard case Smartphone Mount. Place the model either on the left or right side for more durability.
An easy to print PC case which with optimized design for exactly my components. 196x70x320 on front side (CPU, Motherboard, PSU) 170x65x320 on back side (GPU) Hopefully others will also find it useful. Due to flat printing without top and…
Боковая пластиковая втулка переднего бампера на Toyota Hiace.
A simple support to hold a usb cable to the lid. It can be useful to hold a raspberry pi zero. I glued a small piece of felt to tighten the support without scratching the lid.
Theses pods can be 3d printed in ASA with magnets enclaved for the 3d printed cover. They use a generic Chinese lamp that you can find on various seller. Let’s be honest, it’s not Tuningarts.uk carbon fiber pods with PIAA xenon lights,…
Holicí strojek Jedná se o Philips MG5950/15 s množstvím příslušenství: Tělo strojku 11 různých typů nástavců (viz foto) USB napájecí kabel čistící štěteček Materiál PETG , ale může být i PLA nebo ASA Pro těsnění, pokud jej použijete, se…
LG MS2595FISW door latch (lock). Analog of MFG63839001
This is an adapter for a Garmin Nuvi 2595 and maybe some other garmins. The adapter goes to a 17mm ball joint. Category: Other
SCP-5956 AKA the REISNO Cannon from the SCP universe. This is a work-in-progress because I intend to eventually model the Paradox iteration (this is the Prime iteration). (Technically, this is a R1340 Wasp IC engine.) Category: Buildings…
Parametric 6.2cm tall object with rounded circular geometry and a weave pattern. Engineered for precise 3D printing.
I designed this knob for my Yamaha DSPA595a because one of the knobs broke. Probably fits some other models to.
I'll sometimes use this Laptop for retro Things, but I don't need a new Battery. The old one, has to be disposed as it was dead and broken Batteries are always a risk. To Close up the hole I Designed a dummy to fill it up.I used the…
Designed to replace the missing DVD in HP Pavilion 595 Faceplate. Print facing down
![Rugged Box for Harbor Freight VIKING 1000 Peak Amp Lithium-Ion Jump Starter [59527]](https://media.printables.com/media/prints/b8d69858-b41c-485a-aa2f-00373c3a1278/images/11695837_10924ec1-b8b5-4773-a870-ae1acdf45097_23afaca3-04ec-4859-a2a7-8108e2b63037/viking_1000_amp_jump_starter_59527_assembled_model.png)
